DOI QR코드

DOI QR Code

Effects of Fat Reduction on the Stability, Microstructure, Rheological and Color Characteristics of White-Brined Cheese Emulsion with Different Emulsifying Salt Amounts

  • Urgu, Muge (Department of Food Engineering, Faculty of Engineering, Ege University) ;
  • Unluturk, Sevcan (Department of Food Engineering, Izmir Institute of Technology) ;
  • Koca, Nurcan (Department of Food Engineering, Faculty of Engineering, Ege University)
  • 투고 : 2018.04.05
  • 심사 : 2018.06.15
  • 발행 : 2018.10.31

초록

Cheese emulsion is an intermediate product for the production of cheese powder and needs to be stable, homogeneous and pumpable characteristics to convey to the spray drier. This study was conducted to evaluate the effects of fat reduction and emulsifying salt (ES) amount in cheese emulsion systems on the physicochemical characteristics. Reduced-fat (RF) and full-fat (FF) white-brined cheese emulsions were produced with different dry matters (DM; 15%-25% excluding ES) and ES concentrations (0%-3% based on cheese weight). Stable cheese emulsion was obtained at lower DM in RF cheese emulsion than that of FF cheese emulsion. Reduction in the amount of ES resulted in instability of both emulsions. Apparent viscosity with pseudoplastic flow behavior significantly increased with the decrease of fat content in stable cheese emulsions. Microstructure of emulsions appeared to be related to the fat content, stability and degree of emulsification. Reduction of fat content caused to get less lightness and more greenness in color, whereas yellowness was significantly decreased by increase in the amount of ES. In conclusion, fat reduction resulted in higher viscosities of cheese emulsion due to inducing the increment of protein, and the addition amount of ES considered as very important factor to produce stable cheese emulsion without protein precipitation or cream separation. Therefore, for preparation of RF cheese emulsion using a variety of white-brined cheese, lower amounts of DM would be suggested in this study to obtain homogenous droplets in the atomizing process of spray drying.

키워드

참고문헌

  1. AOAC. 2007. Official methods of analysis of AOAC International. 18th ed. AOAC International. Gaithersburg, MD, USA.
  2. Baldwin AJ, Baucke AG, Sanderson WB. 1980. The effect of concentrate viscosity on the properties of spray dried skim milk powder. New Zeal J Dairy Sci 15:289-297.
  3. Fox PF, Guinee TP, Cogan TM, McSweeney PLH. 2017. Processed cheese and substitute/imitation cheese products. In Fundamentals of cheese science. Springer, Boston, MA, USA. pp 589-627.
  4. Guinee TP, Caric M, Kalab M. 2004. Pasteurized processed cheese and substitute/imitation cheese products. In Cheese: Chemistry, physics and microbiology. 2nd ed. Major cheese groups. Fox PF, McSweeney PLH, Cogan TM, Guinee TP (ed). Elsevier/Academic Press, London, UK. pp 349-394.
  5. Guinee TP, O'Kennedy BT. 2012. Reducing the level of added disodium phosphate alters the chemical and physical properties of processed cheese. Dairy Sci Technol 92:469-486. https://doi.org/10.1007/s13594-011-0053-2
  6. Hayaloglu AA, Guven M, Fox PF. 2002. Microbiological, biochemical and technological properties of Turkish White cheese 'Beyaz Peynir'. Int Dairy J 12:635-648. https://doi.org/10.1016/S0958-6946(02)00055-9
  7. Hougaard AB, Sijbrandij AG, Varming C, Ardo Y, Ipsen R. 2015. Emulsifying salt increase stability of cheese emulsions during holding. LWT-Food Sci Technol 62:362-365. https://doi.org/10.1016/j.lwt.2015.01.006
  8. IDF. 1981. Milk determination of fat content-Gerber butyrometers. IDF standard 105, Brussels, Belgium.
  9. IDF. 1982. Determination of total solids content of cheese. IDF Standard 4A, Brussels, Belgium.
  10. IDF. 1988. Determination of salt content (Mohr method). IDF Standard 12B, Brussels, Belgium.
  11. Kelimu A, da Silva DF, Geng X, Ipsen R, Hougaard AB. 2017. Effects of different dairy ingredients on the rheological behaviour and stability of hot cheese emulsions. Int Dairy J 71:35-42. https://doi.org/10.1016/j.idairyj.2017.02.005
  12. Koca N, Erbay Z, Kaymak-Ertekin F. 2015. Effects of spray-drying conditions on the chemical, physical, and sensory properties of cheese powder. J Dairy Sci 98:2934-2943. https://doi.org/10.3168/jds.2014-9111
  13. Lawrence RC, Gilles J, Creamer LK. 1993. Cheddar cheese and related dry-salted cheese varieties. In Cheese: Chemistry, physics and microbiology, major cheese groups. Fox PF (ed). Chapman & Hall, London, UK. pp 1-39.
  14. Lobato-Calleros C, Rodriguez E, Sandoval-Castilla O, Vernon-Carter EJ, Alvarez-Ramirez J. 2006. Reduced-fat white fresh cheese-like products obtained from W1/O/W2 multiple emulsions: Viscoelastic and high-resolution image analyses. Food Res Int 39:678-685. https://doi.org/10.1016/j.foodres.2006.01.006
  15. Ray CA, Gholamhosseinpour A, Ipsen R, Hougaard AB. 2016. The effect of age on Cheddar cheese melting, rheology and structure, and on the stability of feed for cheese powder manufacture. Int Dairy J 55:38-43. https://doi.org/10.1016/j.idairyj.2015.11.009
  16. Varming C, Hougaard AB, Ardo Y, Ipsen R. 2014. Stability of cheese emulsions for spray drying. Int Dairy J 39:60-63. https://doi.org/10.1016/j.idairyj.2014.05.005

피인용 문헌

  1. Milk Fat Substitution by Microparticulated Protein in Reduced-fat Cheese Emulsion: The Effects on Stability, Microstructure, Rheological and Sensory Properties vol.39, pp.1, 2018, https://doi.org/10.5851/kosfa.2018.e60