Journal of the Korea Institute of Information and Communication Engineering (한국정보통신학회논문지)

The Korea Institute of Information and Commucation Engineering (한국정보통신학회)
권호 표지
DOI QR코드

DOI QR Code

Arduino Compatible Modular Kit Design for Educational Purpose

모듈 기반 교육용 아두이노 호환 키트 설계

  • Received : 2018.07.12
  • Accepted : 2018.08.27
  • Published : 2018.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

With the curriculum revision by the ministry of education in 2015, informatics was required to be included in the secondary high school curriculum, and applied to elementary and high schools in order. In response to this trend, universities are also emphasizing programming education. Arduino is one of the famous tools for programming education, and the usefulness of it has been proven through various case studies. However, existing Arduino-based kits are not easy to use with limited hardware knowledge. It is also difficult to expand the kits in a way other than that given in the original design. In this paper, proposed is a new kit design that can solve the problems mentioned above. The proposed design is superior to existing ones in usability and scalability, and can be used in various ways according to the amount of prior knowledge. The proposed design is registered as a patent and development of a kit based on it is underway.

교육부의 2015년 개정 교육과정 개편으로 중학교 정보교과가 필수로 지정된 후 초등학교와 고등학교에도 순차적으로 적용되고 있으며 대학 역시 프로그래밍 교육을 강화하고 있다. 아두이노는 프로그래밍 교육을 위해 사용되는 도구 중 하나로 아두이노를 사용한 프로그래밍 교육의 유용성은 다양한 사례 연구를 통해 입증되었다. 하지만 교육용으로 사용되는 기존 아두이노 호환 키트는 하드웨어 관련 지식 없이는 사용이 쉽지 않으며, 키트 설계 시 주어진 방식 이외의 방법으로 확장하기 어려운 등의 문제점이 있다. 이 논문에서는 기존 아두이노 호환 키트가 가지는 문제점들을 해결할 수 있는 새로운 키트 설계를 제안한다. 제안하는 설계는 기존 키트에 비해 사용성과 확장성이 뛰어나며 하드웨어 및 프로그래밍에 대한 친숙도에 따라 다양한 방식으로 활용할 수 있다. 제안하는 설계는 특허로 등록되었으며 등록된 특허를 바탕으로 키트 개발이 진행 중에 있다.

Keywords

References

  1. Ministry of Education, 2015 revised curriculum general, Notice No. 2015-74, Nov. 2015.
  2. Dan O'Sullivan and Tom Igoe, Physical Computing, 1st ed. Thomson, 2004.
  3. J. B. Song and T. W. Lee, "The Effect of STEM Integration Education Using Educational Robot on Academic Achievement and Subject Attitude," Journal of The Korean Association of Information Education, vol. 15, no. 1, pp. 11-22, Mar. 2011.
  4. H. Aoki, J. M. Kim, Y. Idosaka, T. Kamada, S. Kanemune, and W. G. Lee, "Development of State-Based Squeak and an Examination of Its Effect on Robot Programming Education," KSII Transactions on Internet and Information Systems, vol. 6, no. 11, pp. 2880-2900, Nov. 2012. https://doi.org/10.3837/tiis.2012.10.008
  5. M. Banzi and M. Shiloh, Getting Started with Arduino: The Open Source Electronics Prototyping Platform, 3rd ed. Make Media, 2014.
  6. L. M. Herger and M. Bodarky, "Engaging students with open source technologies and Arduino," in Proceedings of 2015 IEEE Integrated STEM Education Conference, Princeton NJ, pp. 27-32, 2015.
  7. J. H. Park and S. H. Kim, "Case Study on Utilizing Arduino in Programming Education of Engineering," The Journal of Institute of Korean Electrical and Electronics Engineers, vol. 19, no. 2, pp. 276-281, Jun. 2015.
  8. K. J. Lee and S. S. Lee, "An Analysis of Domestic Research Trends in Arts based STEAM Education," Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology, vol. 7, no. 9, pp. 825-832, Sep. 2017.
  9. Z. Hwang and S. Hwang, "An Analysis of Research Trends Software Education for Elementary School : Focusing on Domestic Articles," Journal of The Korean Association of Information Education, vol. 21, no. 5, pp. 509-525, Oct. 2017. https://doi.org/10.14352/jkaie.21.5.509
  10. K. Eom, Y. Jang, J. Kim, and W. Lee, "Development of a Board for Physical Computing Education in Secondary Schools Informatics Education," The Journal of Korean Association of Computer Education, vol. 19, no. 2, pp. 41-50, Mar. 2016.
  11. E. Shin, "Development of an Arduino-based DIY Pacduino kit," Journal of Korea Society of Design Forum, vol. 38, pp. 411-420, Feb. 2013.
  12. D. Lee and Y. Lee, "Arduino Compatible Boards developing strategy for effective physical computing education," in Proceedings of the Korean Society of Computer Information Conference, vol. 24, no. 2, pp. 181-182, 2016.
  13. D. H. Kwon, J. Y. Lim, S. U. Heo, G. H. Kim, and A. S. Oh, "Implementation of Internet of Things Maker Kit Based on MQTT Protocol," Journal of the Korea Institute of Information and Communication Engineering, vol. 21, no. 11, pp. 2145-2152, Nov. 2017. https://doi.org/10.6109/JKIICE.2017.21.11.2145
  14. Tn1, Microcontroller Kit, Korean Patent 1017353010000 to Korean Intellectual Property Office, 2017.
  15. K. Lee and S. Kim, "Case Study for the Application of PBL in Engineering School : Focused on an Element Design Class," Journal of the Korea Academia-Industrial Cooperation Society, vol. 16, no. 1, pp. 671-676, Jan. 2015. https://doi.org/10.5762/KAIS.2015.16.1.671
  16. D. Lee and S. Moon, "Implementation of a drone using the PID control of an 8-bit microcontroller," Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology, vol. 6, no. 9, pp. 81-90, Sep. 2016.
  17. S. J. Kim, "Project-based Embedded System Education Using Arduino," The Journal of Korean Institute of Information Technology, vol. 15, no. 12, pp. 173-180, Nov. 2017. https://doi.org/10.14801/jkiit.2017.15.12.173

Cited by

  1. 128duino : ATmega128을 위한 아두이노 플랫폼의 확장 vol.24, pp.10, 2018, https://doi.org/10.6109/jkiice.2020.24.10.1369
  2. Convergence Education Modeling for Teaching Integration of IoT with 3D Printing Based on Manufacturing Chemical Product by Production Companies vol.12, pp.4, 2018, https://doi.org/10.7236/ijibc.2020.12.4.55