DOI QR코드

DOI QR Code

SnS2/p-Si 이종접합 광 검출기

SnS2/p-Si Heterojunction Photodetector

  • Oh, Chang-Gyun (Department of Electrical Engineering, Incheon National University) ;
  • Cha, Yun-Mi (Department of Electrical Engineering, Incheon National University) ;
  • Lee, Gyeong-Nam (Department of Electrical Engineering, Incheon National University) ;
  • Jung, Bok-Mahn (Department of Electrical Engineering, Incheon National University) ;
  • Kim, Joondong (Department of Electrical Engineering, Incheon National University)
  • 투고 : 2018.07.26
  • 심사 : 2018.09.18
  • 발행 : 2018.10.01

초록

A heterojunction $SnS_2/p-Si$ photodetector was fabricated by RF magnetron sputtering system. $SnS_2$ was formed with 2-inch $SnS_2$ target. Al was applied as the front and the back metal contacts. Rapid thermal process was conducted at $500^{\circ}C$ to enhance the contact quality. 2D material such as $SnS_2$, MoS2 is very attractive in various fields such as field effect transistors (FET), photovoltaic fields such as photovoltaic devices, optical sensors and gas sensors. 2D material can play a significant role in the development of high performance sensors, especially due to the advantages of large surface area, nanoscale thickness and easy surface treatment. Especially, $SnS_2$ has a indirect bandgap in the single and bulk states and its value is 2 eV-2.6 eV which is considerably larger than that of the other 2D material. The large bandgap of $SnS_2$ offers the advantage for the large on-off current ratio and low leakage current. The $SnS_2/p-Si$ photodetector clearly shows the current rectification when the thickness of $SnS_2$ is 80 nm compared to when it is 135 nm. The highest photocurrent is $19.73{\mu}A$ at the wavelength of 740 nm with $SnS_2$ thickness of 80 nm. The combination of 2D materials with Si may enhance the Si photoelectric device performance with controlling the thickness of 2D layer.

키워드

참고문헌

  1. Chen, H. et al. "Suspended $SnS_2$ Layers by Light Assistance for Ultrasensitive Ammonia Detection at Room Temperature", Adv. Funct. Mater. Vol. 28, pp. 1-8, 2018.
  2. Geim, A. K. and Grigorieva, I. V. Van der Waals heterostructures. Nature, Vol. 499, pp. 419-425, 2013. https://doi.org/10.1038/nature12385
  3. Fiori, G. et al. "Electronics based on two-dimensional materials," Nat. Nanotechnol, Vol. 9, pp. 768-779, 2014. https://doi.org/10.1038/nnano.2014.207
  4. Yang, W., Gan, L., Li, H. and Zhai, T., "Two-dimensional layered nanomaterials for gas-sensing applications," Inorg. Chem. Front., Vol. 3, pp. 433-451, 2016. https://doi.org/10.1039/C5QI00251F
  5. Zhou, X. et al. "Tunneling Diode Based on $WSe_2/SnS_2$ Hetero structure In corporating High Detectivity and Responsivity," Adv. Mater., Vol. 30, pp. 1703286-1703294, 2018. https://doi.org/10.1002/adma.201703286
  6. Li, X. et al. "$SnS_2/TiO_2$ Nano hybrids Chemically Bonded on Nitrogen-doped Graphene for Lithium-Sulfur Batteries: Synergy of Vacancy Defects and Heterostructure", Nanoscale, 2013.
  7. Norby, P., Johnsen, S. and Iversen, B. B. "Fine tunable aqueous solution synthesis of textured flexible $SnS_2$ thin films and nanosheets", Phys. Chem. Chem. Phys., Vol. 17, pp. 9282-9287, 2015. https://doi.org/10.1039/C4CP06018K
  8. He, X. and Shen, H. "Ab initio calculations of band structure and thermophysical properties for $SnS_2$ and $SnSe_2$", Phys. B Condens. Matter, Vol. 407, pp. 1146-1152, 2012. https://doi.org/10.1016/j.physb.2012.01.102
  9. Liu, Z., Deng, H. and Mukherjee, P. P. "Evaluating pristine and modified $SnS_2$ as a lithium-ion battery anode: A first-principles study", ACS Appl. Mater. Interfaces, Vol. 7, pp. 4000-4009, 2015. https://doi.org/10.1021/am5068707
  10. Ye, G. et al. "Synthesis of large-scale atomic-layer $SnS_2$ through chemical vapor deposition", Nano Res., Vol. 10, pp. 2386-2394, 2017. https://doi.org/10.1007/s12274-017-1436-3
  11. Huang, Y. et al. "Tin disulfide-an emerging layered metal dichalcogenide semiconductor: Materials properties and device characteristics", ACS Nano, Vol. 8, pp. 10743-10755 2014. https://doi.org/10.1021/nn504481r
  12. Mattinen, M. et al. "Low-Temperature Wafer-Scale Deposition of Continuous 2D $SnS_2$ Films. Small, Accept", Publ., Vol. 1800547, pp. 1-8, 2018.
  13. Liu, J. W., et al. "Photoassisted degradation of pentachlorophenol in a simulated soil washing system containing nonionic surfactant Triton X-100 with La-B codoped $TiO_2$ under visible and solar light irradiation", Applied Catalysis B: Environmental, Vol. 103, pp. 470-478, 2011. https://doi.org/10.1016/j.apcatb.2011.02.013