Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

A Fundamental Study on Vibration Characteristics of Container Car for Sensitive Cargo Transportation according to ASTM D-4169

ASTM 규격에 따른 민감화물 수송용 컨테이너 화차의 진동 특성에 관한 기초 연구

  • Ki, Ho-Cheol (Railway Vehicle System Engineering. Depart, Korea National University of Transportation) ;
  • Lee, Seung-Yil (Railway Vehicle System Engineering. Depart, Korea National University of Transportation) ;
  • Kim, Chul-Su (Railway Vehicle System Engineering. Depart, Korea National University of Transportation)
  • 기호철 (한국교통대학교 철도차량시스템전공) ;
  • 이승일 (한국교통대학교 철도차량시스템전공) ;
  • 김철수 (한국교통대학교 철도차량시스템전공)
  • Received : 2019.09.18
  • Accepted : 2019.12.06
  • Published : 2019.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

To reduce the vibrations and shocks during the cargo transportation of high value-added goods, the vibration history was measured on the truck transportation section (Asan-Uiwang) and the freight train transportation section (Uiwang-Pusan). The internal vibrations of the container were obtained by attaching acceleration sensors in three axis directions (longitudinal, lateral. and vertical directions) on the front and rear bogies. The rail vibration profile (0.29Grms) proposed in ASTM D-4169 was approximately 50% higher than the truck vibration profile (0.54Grms). The overall vibration was 16% and 33 % lower in the longitudinal and transverse directions, respectively, compared to the ASTM truck transport vibration profile. On the other hand, the vertical vibration measurement history partially exceeded the ASTM truck transport vibration profile over the range, 4 - 15Hz, and over 60Hz. The vibration measurement history of the cargo train was similar to that of the road. The longitudinal and lateral vibration history was lower than the ASTM D-4169 rail vibration profile, while the vertical history was over 30Hz.

민감 상품의 화물 운송 중 발생하는 진동 및 충격의 저감을 위하여 본 연구에서는 실제 트럭과 화차에 진동센서가 부착된 컨테이너를 이용하여 운송 경로에 따른 진동이력을 측정하였다. 컨테이너 내부 바닥 2개소에 3축 방향(길이, 횡, 수직 방향)으로 가속도센서를 부착하여 트럭운송 구간(아산-의왕)과 화물열차 운송 구간(의왕-부산)에 대하여 진동이력을 측정하였다. ASTM D-4169에서 제안된 철도 진동 프로파일(0.29Grms)은 트럭 진동 프로파일(0.54Grms) 대비 약 50% 수준으로 낮다. 국내 화물 컨테이너 운송 동안 ASTM D-4169에 준한 진동 프로파일과 비교한 결과는 다음과 같다. 트럭 운송 구간에서의 길이방향과 횡 방향 진동 수준은 모두 ASTM의 트럭운송 진동 프로파일보다 길이방향 약 16%, 횡 방향 약 33% 수준으로 전반적으로 낮게 나타난 반면에, 수직방향 진동은 4~15Hz와 60Hz 이상 범위에서 ASTM의 트럭운송 진동 프로파일을 부분적으로 초과하였다. 화물열차 진동 측정이력은 도로와 유사하며, 길이방향과 횡방향의 진동측정이력은 ASTM D-4169의 철도 진동 프로파일보다 낮으며, 반대로 수직방향의 이력은 30Hz이상 범위에서 초과하였다.

Keywords

References

  1. K. Y. Oh, J. S. Park, "An Empirical Study on the Barriers of Vitalizations of Rail", KOREA LOGISTICS REVIEW, Vol.20, No.5, pp.309-328, Dec. 2010. UCI: G704-001067.2010.20.5.007
  2. C. H. Cho, E. C. Kim, "Evaluating Service Quality of the Rail and Road Container Transport un Kyungin-Busan Corridor", KOREA LOGISTICS REVIEW, Vol.15, No.3, pp.151-171, Sep. 2005. UCI: G704-001067.2005.15.3.005
  3. K. M. Koo, Y. S. Oh, "Research for Plans of Modal-Shift to Promote Rail Freight Transportation-From the view of Japanese Policy & Example-", KOREA LOGISTICS REVIEW, Vol.19, No.2, pp.161-188, Jun. 2009. UCI: G704-001067.2009.19.2.010
  4. G. H. Kang, "An Evaluation of Loss Factor of Damping Treatment Materials for Panels of Railway Vehicles", Journal of the Korea Academia-Industrial cooperation Society, Vol.20, No.4, pp.489-496, 2019. DOI: https://doi.org/10.5762/KAIS.2019.20.4.489
  5. K. H. Moon, Y. S. Ham, J. S. Hong, "Vibrational Characteristics of an End Beam of a Freight Cal- on the Taebaek Line", Transactions of the Korean Society for Noise and Vibration Engineering, Vol.14, No.10, pp.962-967, Oct. 2004. DOI: https://doi.org/10.5050/KSNVN.2004.14.10.962
  6. Technical Specifications for Railway Vehicles KRTS-VE-Part43-2017(R1) 5.3.4 vibration test http://www.molit.go.kr/portal.do
  7. UIC 518 (E) Testing and approval of railway vehicles from the point of view of their dynamic behaviour - safety-track fatigue - ride quality https://uic.org/sustainable-development/noise-and-vibration/EuropeTrain
  8. KS C IEC 61373 Railway applications - Rolling stock equipment - Shock and vibration tests, https://standard.go.kr/KSCI/portalindex.do
  9. Six Step Method for Cushioned Package Development, http://www.lansmont.com/resources/six-step-method/six-step-method-step-1/
  10. ASTM D4169 Truck Profile Update Rational, http://www.lansmont.com/lansmont-test/
  11. J. H. Lee, "A Study on the Improvement Strategy of Rail Freight Transport in Korean", KOREA LOGISTICS REVIEW, Vol.16, No.4, pp.87-112, Dec. 2006. UCI: G704-001067.2006.16.4.012