대한조선학회논문집 (Journal of the Society of Naval Architects of Korea)

  • 제56권6호
  • /
  • Pages.532-540
  • /
  • 2019
  • /
  • 1225-1143(pISSN)
  • /
  • 2287-7355(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

극지용 도료의 빙마찰 및 빙마모 시험기법 연구

Experimental Study of Ice Friction and Abrasion Test Methods for Polar Paint

  • 조성락 (한국해양과학기술원 선박해양플랜트연구소) ;
  • 오은진 (한국해양과학기술원 선박해양플랜트연구소) ;
  • 김철희 (한국해양과학기술원 선박해양플랜트연구소) ;
  • 이재만 (대우조선해양(주) 선형추진연구부) ;
  • 김성표 (대우조선해양(주) 선형추진연구부)
  • Cho, Seong-Rak (Korea Research Institute of Ships & Ocean Engineering, KIOST) ;
  • Oh, Eun-Jin (Korea Research Institute of Ships & Ocean Engineering, KIOST) ;
  • Kim, Cheol-Hee (Korea Research Institute of Ships & Ocean Engineering, KIOST) ;
  • Lee, Jae-Man (Daewoo Shipbuilding & Marine Engineering Co.) ;
  • Kim, Sung-Pyo (Daewoo Shipbuilding & Marine Engineering Co.)
  • 투고 : 2019.06.24
  • 심사 : 2019.09.26
  • 발행 : 2019.12.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study describes a test method for evaluating the ice friction and abrasion performance of polar coatings. The evaluation methods of physical properties of general coatings for ocean-going vessels and polar coatings for ice-going vessels were investigated and their limitations were analyzed. We have also reviewed previous researches related to the development of polar paints and confirmed the necessity of developing test techniques. A flat steel plate was coated with several types of commercial coating, and cold model ice was used to cause ice friction and abrasion events between coated surface and ice. For evaluation of ice friction and abrasion performances, test procedures such as measurement of coating surface roughness, measurement of frictional force using model ice, implementation of ice abrasion and drying of coating surface were developed. The friction and abrasion characteristics of each coating are analyzed and summarized through the change of friction force and roughness data according to the progress of ice abrasion.

키워드

참고문헌

  1. Cho, S., Chun, E., Yoo, C., Jeong, S., & Lee., C., 2011. The measuring methodology of friction coefficient between ice and ship hull. Journal of the Society of Naval Architects of Korea, 47(6), pp.363-367.
  2. Cho, S., Joeng, S., Ha, J. & Kang, K., 2013. An experimental study on generation and measurement method of EG/AD model ice at cold room for improvement of its properties. Journal of the Society of Naval Architects of Korea, 50(6), pp.421-427. https://doi.org/10.3744/SNAK.2013.50.6.421
  3. Cho, S., & Lee, S., 2015. A prediction method of ice breaking resistance using a multiple regression analysis. International Journal of Naval Architecture and Ocean Engineering, 2015(7), pp.708-719.
  4. Hoffmann, L., 1986. Eisstossbelastung und Reibungkrafte auf Eisdruckmesstaschen. Hamburgische Schiffbauversuchsanstalt und Germanisches Lloyd, pp.6.1-6.17.
  5. ITTC, 1996. Final report and recommendations to the 22nd ITTC. The Performance in Ice-Covered Waters Committee of 21st ITTC.
  6. ISO, 2011. Paints and varnishes-Rapid-deformation tests. ISO 6272-2.
  7. ISO, 2016. Paints and varnishes-Determination of resistance to abrasion. ISO 7784-2.
  8. Kashteljan, V., Poznyak, I., & Ryvlin, A., 1968. Ice resistance to motion of a ship. Sudostroyeniye. Leningrad.
  9. Kivimaa, S, 1992. Full-scale trials on hull resistance and now ice load in level ice on board the cutter M.S. Uisko. The 3rd International Conference on Ice Technology, Cambridge, USA.
  10. Lee, J., 2010. History and flow of ship painting. Bulletin of the Society of Naval Architects of Korea, 47(2), pp.59-67.
  11. Liukkonen, S, 1992. Theoretical approach to physical modelling of kinetic friction between ice and ship. The 11th International Conference on Offshore Mechanics and Arctic Engineering, Calgary, Canada.
  12. Makinen, E., Lahti, A., & Rimppi, M., 1975. Influence of friction on ice resistance. search for low friction surfaces. The Society of Naval Architects and Marine Engineers(Icetech 75), Montreal, Canada.
  13. Makinen, E., Liukkonen, S., Nortala-Hoikkanen, A., & Harjula, A., 1994. Friction and hull coatings in ice operations. The Society of Naval Architects and Marine Engineers(Icetech 94), Calgary, Canada.
  14. Sodhi, D., 1995. Northern sea route reconnaissance study. CRREL Report 95-17.
  15. Tan, I., 2018. Marathon IQ2 The smoothest & Toughest Ice Resistance Coating. Jotun Customer Presentation.
  16. Tanaka, T., 1992. Physical properties and evaluation method of paints. The Society of Adhesion and Interface, Korea.
  17. Vance, G., 1975. A scaling system for ships modelled in ice. The Society of Naval Architects and Marine Engineers(Icetech 75), Montreal, Canada.