한국결정성장학회지 (Journal of the Korean Crystal Growth and Crystal Technology)

  • 제29권6호
  • /
  • Pages.329-337
  • /
  • 2019
  • /
  • 1225-1429(pISSN)
  • /
  • 2234-5078(eISSN)
한국결정성장학회 (The Korea Association of Crystal Growth)
권호 표지
DOI QR코드

DOI QR Code

스플린터 및 판상형 티탄산칼륨염 합성 및 브레이크 보강재로서의 평가

Synthesis of splinter-type and plate-type potassium titanate as reinforcements in brake pad for automobile

  • Kim, Sung-Hun (Department of Advanced Materials Science and Engineering, Yonsei University) ;
  • Kim, Jong-Young (Icheon Branch, Korea Institution of Ceramic Engineering and Technology) ;
  • Shim, Wooyoung (Department of Advanced Materials Science and Engineering, Yonsei University) ;
  • Lee, Jung Ju (Advanced Research Team, Sangsin Brake R&D Institute) ;
  • Kwon, Sung Wook (Advanced Research Team, Sangsin Brake R&D Institute)
  • 투고 : 2019.11.11
  • 심사 : 2019.12.06
  • 발행 : 2019.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

스플린터(splinter) 및 판상(plate shape) 형상을 가지는 티탄산칼륨염(K2O·nTiO2, PT)을 합성하고 브레이크 마찰재의 보강재로 이용하여 마찰 특성을 평가하였다. 스플린터형 티탄산칼륨염을 합성하기 위하여 먼저 판상 형상을 가지는 사티탄산칼륨염(K2O·4TiO2, PT4)을 합성하고 칼륨 이온(K+)을 일부 산침출(acid leaching)하여 육티탄산칼륨염(K2O·6TiO2, PT6)으로 변환시킨 후, 800℃에서 열처리하여 스플린터 형상의 입자를 얻었다. 판상형 티탄산칼륨염을 합성하기 위해서 염화칼륨을 융제로 사용하고 마그네슘(Mg)을 일부 첨가하여 판상의 형상을 가지는 마그네슘티탄산칼륨염(K0.8Mg0.4Ti1.6O4, PMT)을 합성하였다. 얻어진 육티탄산칼륨염 및 마그네슘티탄산칼륨염 입자를 보강재로 이용하여 브레이크 패드 마찰재를 제작하고 1/ 5-스케일 다이나모미터(scale dynamometer)를 이용하여 마찰 마모 특성을 평가하였다. 평가 결과, 두 종류의 보강재가 유사한 마찰계수 및 Fade & recovery 특성을 보였으며 판상형 마그네슘티탄산칼륨염의 경우, 스플린터형 육티탄산칼륨염보다 우수한 내마모성을 보이는 것을 알 수 있었다.

We synthesized potassium titanates having splinter and plate shape and evaluated frictional and wear properties of brake pad using them as reinforcements in friction materials. For splinter-shaped potassium titanates, potassium tetratitanate (K2O·4TiO2, PT4) with plate shape was prepared, then K ion of the titanate was leached by acid to make potassium hexatitanate (K2O·6TiO2, PT6), which was transformed to splinter-shaped PT6 by thermal treatment at 800℃. Plate-shaped potassium magnesium titanate (K0.8Mg0.4Ti1.6O4, PMT) was prepared by adding Mg in the potassium titanate using KCl as a flux. Using PT6 and PMT as reinforcements in friction materials of brake pad, we evaluated frictional and wear properties using 1/5-scale dynamometer. According to dynamometer test results, both reinforcements shows similar friction coefficient and fade & recovery behavior to conventional material and plate-shaped PMT exhibits higher wear resistance than splinter-shaped PT6.

키워드

참고문헌

  1. D. Chan and G.W. Stachowiak, "Review of automotive brake friction materials", Proc. Instn. Mech. Eng. 218 (2004) 953. https://doi.org/10.1243/0954407041856773
  2. J.J. Lee, J. Lee, S. Kwon and J.-J Kim, "Effect of different reinforcement materials on the formation of secondary plateaus and friction properties in friction materials for automobiles", Tribol. Int. 120 (2018) 70. https://doi.org/10.1016/j.triboint.2017.12.020
  3. M.H. Cho, S.J. Kim, D.H. Kim and H. Jang, "Effect of ingredients on tribological characteristics of a brake lining: an experimental case study", Wear. 258 (2005) 1682. https://doi.org/10.1016/j.wear.2004.11.021
  4. K.H. Cho, M.H. Cho, S.J. Kim and H. Jang, "Tribological properties of potassium titanate in the brake friction material; morphological effects", Tribol. Lett. 32 (2008) 59. https://doi.org/10.1007/s11249-008-9362-x
  5. T. Endo, H. Nagayama, T. Sato and M. Shimada, "Crystallization of potassium titanate from the amorphous phase", J. Mater. Sci. 23 (1988) 694. https://doi.org/10.1007/BF01174707
  6. T. Oota, H. Saito and I. Yamai, "Synthesis of potassium hexatitanate fibers by the hydrothermal dehydration method", J. Cryst. Growth 46 (1979) 331. https://doi.org/10.1016/0022-0248(79)90081-2
  7. J.J. Lee, S. Kwon, J.-Y. Kim, N. Lee, J.-H. Pee, Y. Kim, J. Lee and J.-J. Kim, "Effect of hardness and morphology of potassium titanate on frictional wear characteristics of brake pads", Int. J. Nanotech. 15 (2018) 474. https://doi.org/10.1504/IJNT.2018.096338
  8. N. Song, Y. Liu, B. Liu, Y. Liu, Y. Tan, W. Wei and T. Luo, "Controlled synthesis of platy potassium titanates from potassium magnesium titanate", RSC Adv. 3 (2013) 8326. https://doi.org/10.1039/c3ra21965h
  9. G. Eriksson and A.D. Pelton, "Critical evaluation and optimization of the thermodynamic properties and phase diagram of the MnO-$TiO_2$, MgO-$TiO_2$, FeO-$TiO_2$, $Ti_2O_3-TiO_2$, $Na_2O-TiO_2$, and $K_2O-TiO_2$ system", Metall. Mater. Trans. B. 24 (1993) 795.