International Journal of Naval Architecture and Ocean Engineering

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Case studies on the probabilistic characteristics of ultimate strength of stiffened panels with uniform and non-uniform localized corrosion subjected to uniaxial and biaxial thrust

  • Cui, Jinju (State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University) ;
  • Wang, Deyu (State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University) ;
  • Ma, Ning (State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University)
  • Received : 2016.08.30
  • Accepted : 2018.02.15
  • Published : 2019.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

Based on Nonlinear Finite Element Analysis (NFEA), this paper focuses on the bi-axial ultimate strength of typical bottom structures under corrosion. On one hand, uniform and not simultaneous corrosion across different structures is introduced, and surrogate models by Gaussian Process (GP) are built for both longitudinal and transverse cases individually, and corresponding probabilistic characteristics are investigated; meanwhile, corrosion effects on interaction between bi-axial stresses at ultimate state are studied. On the other hand, non-uniform localized pitting corrosion of normally distributed circular shapes is introduced, and different pitting corrosion densities are considered; structural bi-axial ultimate strengths under pitting corrosion are studied, and the results are compared with that from equivalent uniform corrosion; the probabilistic characteristics of structural ultimate strength in life cycle are studied; finally, the ultimate strength under randomly distributed pitting corrosion is compared with results from normally distributed pitting and uniform corrosion under various boundary conditions.

Keywords

References

  1. Cui, J., Wang, D., Vlahopoulos, N., 2014. Containership structural design and optimization based on knowledge-based engineering and Gaussian process. J. Shanghai Jiaot. Univ. 19 (2), 205-218. https://doi.org/10.1007/s12204-014-1491-9
  2. DNV, 2005. Nauticus Hull User Manual. PULS.
  3. Fujikubo, M., Harada, M., Yao, T., Reza Khedmati, M., Yanagihara, D., 2005a. Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 2: continuous stiffened panel. Mar. Struct. 18 (5-6), 411-427. https://doi.org/10.1016/j.marstruc.2006.01.001
  4. Fujikubo, M., Yao, T., 1999. Elastic local buckling strength of stiffened plate considering plate/stiffener interaction and welding residual stress. Mar. Struct. 12 (9), 543-564. https://doi.org/10.1016/S0951-8339(99)00032-5
  5. Fujikubo, M., Yao, T., Khedmati, M.R., Harada, M., Yanagihara, D., 2005b. Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 1: continuous plate. Mar. Struct. 18 (5-6), 383-410. https://doi.org/10.1016/j.marstruc.2005.08.004
  6. Garbatov, Y., Guedes Soares, C., 2009. Corrosion wastage statistics and maintenance planning of corroded hull structures of bulk carriers. Marstruct Bk Series 215-222.
  7. Garbatov, Y., Guedes Soares, C.,Wang, G., 2007. Nonlinear time dependent corrosion wastage of deck plates of ballast and cargo tanks of tankers. J. Offshore Mech. Arct. Eng. Times. 129 (1), 48. https://doi.org/10.1115/1.2426987
  8. Guedes Soares, C., Garbatov, Y., 1996a. Reliability of maintained ship hulls subjected to corrosion. J. Ship Res. 40 (3), 235-243. https://doi.org/10.5957/jsr.1996.40.3.235
  9. Guedes Soares, C., Garbatov, Y., 1999. Reliability of maintained, corrosion protected plates subjected to non-linear corrosion and compressive loads. Mar. Struct. 12 (6), 425-445. https://doi.org/10.1016/S0951-8339(99)00028-3
  10. Guedes Soares, C., Gordo, J.M., 1996. Compressive strength of rectangular plates under biaxial load and lateral pressure. Thin Wall. Struct. 24 (3), 231-259. https://doi.org/10.1016/0263-8231(95)00030-5
  11. Guo, J.T., Wang, G., Ivanov, L., Perakis, A.N., 2008. Time-varying ultimate strength of aging tanker deck plate considering corrosion effect. Mar. Struct. 21 (4), 402-419. https://doi.org/10.1016/j.marstruc.2008.03.002
  12. Harada, M., 2004. Practical Method to Estimate Ultimate Strength of Members in Ship Structure. Dr. Thesis. Hiroshima University (in Japanese).
  13. Harada, M., Fujikubo, M., Yanagihara, D., 2004. Development of simple formulae of ultimate strength of continuous stiffened plates under combined thrust and lateral pressure. J. Kansai Soc. Nav. Archit. Jpn. 241, 159-168.
  14. Harada, M., Fujikubo, M., Yanagihara, D., 2007. Development of a set of closed-form formulae for estimation of ultimate strength of a continuous stiffened panel under combined in-plane loads and lateral pressure. ClassNK technical bulletin 25, 11-21.
  15. Htun, M.M., Kawamura, Y., Ajiki, M., 2013. A study on random field model for representation of corroded surface. Analysis and Design of Marine Structures. Mar. Struct. 2013, 545-553.
  16. IACS, 2006. Common structural rules for bulk carriers. January.
  17. Melchers, R.E., 1995. Probabilistic modelling of marine corrosion of steel specimens. In: The Fifth International Offshore and Polar engineering conference. International Society of Offshore and Polar Engineers.
  18. Melchers, R.E., 1997. Modeling of marine corrosion of steel specimens, corrosion testing in natural waters: second volume. ASTM International.
  19. Melchers, R.E., 1998. Probabilistic modelling of immersion marine corrosion. Struct. Saf. Reliab. 3, 1143-1149.
  20. Melchers, R.E., 1999. Corrosion uncertainty modelling for steel structures. J. Constr. Steel Res. 52 (1), 3-19. https://doi.org/10.1016/S0143-974X(99)00010-3
  21. Paik, J.K., Kim, S.K., Lee, S.K., 1998. Probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers. Ocean Eng. 25 (10), 837-860. https://doi.org/10.1016/S0029-8018(97)10009-9
  22. Paik, J.K., Lee, J.M., Ko, M.J., 2004. Ultimate shear strength of plate elements with pit corrosion wastage. Thin Wall. Struct 42 (8), 1161-1176. https://doi.org/10.1016/j.tws.2004.03.024
  23. Qin, S., Cui, W., 2003. Effect of corrosion models on the time-dependent reliability of steel plated elements. Mar. Struct. 16 (1), 15-34. https://doi.org/10.1016/S0951-8339(02)00028-X
  24. Sacks, J., Schiller, S.B., Welch, W.J., 1989. Designs for computer experiments. Technometrics 31 (1), 41-47. https://doi.org/10.1080/00401706.1989.10488474
  25. Smith, C., Davidson, P., Chapman, J., 1988. Strength and stiffness of ships' plating under in-plane compression and tension, 130. Royal Institution of Naval Architects Transactions.
  26. Southwell, C., Bultman, J., Hummer, C., 1979. Estimating service life of steel in seawater. M. Schumacher Park Ridge, NJ: Noyes Data Corp. 1979, 374-387.
  27. Sun, H.H., Bai, Y., 2003. Time-variant reliability assessment of FPSO hull girders. Mar. Struct. 16 (3), 219-253. https://doi.org/10.1016/S0951-8339(02)00002-3
  28. Tanaka, S., Yanagihara, D., Yasuoka, A., Harada, M., Okazawa, S., Fujikubo, M., Yao, T., 2014. Evaluation of ultimate strength of stiffened panels under longitudinal thrust. Mar. Struct. 36, 21-50. https://doi.org/10.1016/j.marstruc.2013.11.002
  29. Ueda, Y., Yao, T., 1985. The influence of complex initial deflection modes on the behaviour and ultimate strength of rectangular plates in compression. J. Constr. Steel Res. 5 (4), 265-302. https://doi.org/10.1016/0143-974X(85)90024-0
  30. Wang, Y.K., Wharton, J.A., Shenoi, R.A., 2015. Ultimate strength assessment of steel stiffened plate structures with grooving corrosion damage. Eng. Struct. 94, 29-42. https://doi.org/10.1016/j.engstruct.2015.02.028
  31. Wirsching, P.H., Ferensic, J., Thayamballi, A., 1997. Reliability with respect to ultimate strength of a corroding ship hull. Mar. Struct. 10 (7), 501-518. https://doi.org/10.1016/S0951-8339(97)00009-9
  32. Xu, M.C., Yanagihara, D., Fujikubo, M., Guedes Soares, C., 2013. Influence of boundary conditions on the collapse behaviour of stiffened panels under combined loads. Mar. Struct. 34, 205-225. https://doi.org/10.1016/j.marstruc.2013.09.002
  33. Yamamoto, N., Ikegami, K., 1998. A study on the degradation of coating and corrosion of ship's hull based on the probabilistic approach. J. Offshore Mech. Arctic Eng. 120 (3), 121-128. https://doi.org/10.1115/1.2829532
  34. Yao, T., Fujikubo, M., Yanagihara, D., Varghese, B., Niho, O., 1998. Influences of welding imperfections on buckling/ultimate strength of ship bottom plating subjected to combined biaxial thrust and lateral pressure. Thin-Walled Struct. 425-432.

Cited by

  1. An advanced technique to predict time-dependent corrosion damage of onshore, offshore, nearshore and ship structures: Part I = generalisation vol.12, 2019, https://doi.org/10.1016/j.ijnaoe.2020.06.007
  2. An advanced technique to predict time-dependent corrosion damage of onshore, offshore, nearshore and ship structures: Part II = Application to the ship's ballast tank vol.12, 2019, https://doi.org/10.1016/j.ijnaoe.2020.07.002
  3. A parametric study on effects of pitting corrosion on stiffened panels' ultimate strength vol.12, 2019, https://doi.org/10.1016/j.ijnaoe.2020.08.001