Advances in concrete construction

  • 제8권4호
  • /
  • Pages.321-333
  • /
  • 2019
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Performance assessment of nano-Silica incorporated recycled aggregate concrete

  • 투고 : 2018.12.27
  • 심사 : 2019.10.15
  • 발행 : 2019.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present study targets to access the consequence of utilization of coarse aggregates retrieved from waste concrete as a substitution of coarse fraction of natural aggregates and silica nano-particles as partial substitution of cement using principles of factorial design. Furthermore, procedures of design of experiments are employed to examine the effect of use of recycled aggregates and nano-silica. In this investigation, compressive strength found after at 7, 28, 90 and 365 days, split and flexural tensile strength, ultrasonic pulse velocity and rebound number and are chosen as responses, whereas the percentages of recycled coarse aggregates (RCA%) and nano-silica (NS(%)) are selected as factors. Analysis of Variance has been conducted on the experimental results for the selected responses with consideration the both factors, which indicates that RCA (%) and NS (%) have substantial impact on the various responses. However, the present analysis depicts that interaction between factors has considerable effect on the chosen parameters of concrete. Furthermore, validation experiments are carried to validate these models for compressive and tensile strength for 100% RCA and 1% NS. The results of comparative study indicates that that the error of the estimation determined using the relevant models are found to be small (±5%) in comparison with the analogous experimental results, which authenticates the calculated models.

키워드

참고문헌

  1. Abdollahzadeh, G., Jahani, E. and Kashir, Z. (2016), "Predicting of compressive strength of recycled aggregate concrete by genetic programming", Comput. Concrete, 18(2), 155-163. http://dx.doi.org/10.12989/cac.2016.18.2.155.
  2. Ajdukiewicz, A. and Kliszczewicz, A. (2002), "Influence of recycled aggregates on mechanical properties of HS/HPC", Cement Concrete Compos., 24(2), 269-279. https://doi.org/10.1016/S0958-9465(01)00012-9.
  3. Batayneh, M., Marie, I. and Asi, I. (2007), "Use of selected waste materials in concrete mixes", Waste Manage., 27(12), 1870-1876. https://doi.org/10.1016/j.wasman.2006.07.026.
  4. Correia, S.L., Souza, F.L., Dienstmann, G. and Segadaes, A.M. (2009), "Assessment of the recycling potential of fresh concrete waste using a factorial design of experiments", Waste Manage., 29(11), 2886-2891. https://doi.org/10.1016/j.wasman.2009.06.014.
  5. De Oliveira, M.B. and Vazquez, E. (1996), "The influence of retained moisture in aggregates from recycling on the properties of new hardened concrete", Waste Manage., 16(1), 113-117. https://doi.org/10.1016/S0956-053X(96)00033-5.
  6. Duan, Z.H. and Poon, C.S. (2014), "Factors affecting the properties of recycled concrete by using neural networks", Comput. Concrete, 14(5), 547-561. http://dx.doi.org/10.12989/cac.2014.14.5.547.
  7. He, Z.J., Liu, G.W., Cao, W.L., Zhou, C.Y. and Jia-Xing, Z. (2015), "Strength criterion of plain recycled aggregate concrete under biaxial compression", Comput. Concrete, 16(2), 209-222. https://doi.org/10.12989/cac.2015.16.2.209.
  8. Hosseini, P., Booshehrian, A. and Madari, A. (2011), "Developing concrete recycling strategies by utilization of nano-$SiO_2$ particles", Waste Biomass Valoriz., 2(3), 347-355. http://dx.doi.org/10.1007/s12649-011-9071-9.
  9. IS: 10262 (2009), Indian Standard Concrete Mix Proportioning-Guidelines, Bureau of Indian Standards, New Delhi.
  10. IS: 1331 (1992), Indian Standard Non-destructive Testing of Concrete-Method of Test: Part 2 Rebound Hammer, Bureau of Indian Standards, New Delhi.
  11. IS: 1331 (1992), Indian Standard Non-destructive Testing of Concrete-Method of Test: Part 1 Ultrasonic Pulse Velocity, Bureau of Indian Standards, New Delhi.
  12. IS: 383 (1970), Indian Standard Specification for Coarse and Fine Aggregate from Natural Sources, Bureau of Indian Standards, New Delhi.
  13. IS: 516 (1959), Indian Standard Methods of Tests for Strength Concrete, Bureau of Indian Standards, New Delhi. (Reaffirmed in 1999)
  14. IS: 5816 (1999), Indian Standard Splitting Tensile Strength of Concrete-method of Test, Bureau of Indian Standards, New Delhi.
  15. IS: 8112 (1989), Indian Standard Specification 43 Grade Ordinary Portland Cement Specification, Bureau of Indian Standards, New Delhi.
  16. Levy, S.M. and Helene, P. (2004), "Durability of recycled aggregates concrete: a safe way to sustainable development", Cement Concrete Res., 34(11), 1975-1980. https://doi.org/10.1016/j.cemconres.2004.02.009.
  17. Li, J., Xiao, H. and Zhou, Y. (2009), "Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete", Constr. Build. Mater., 23(3), 1287-1291. https://doi.org/10.1016/j.conbuildmat.2008.07.019.
  18. Liang, J.F., Yang, Z.P., Yi, P.H. and Wang, J.B. (2017), "Stress-strain relationship for recycled aggregate concrete after exposure to elevated temperatures", Comput. Concrete, 19(6), 609-615. https://doi.org/10.12989/cac.2017.19.6.609.
  19. Lopez-Gayarre, F., Serna, P., Domingo-Cabo, A., Serrano-Lopez, M.A. and Lopez-Colina, C. (2009), "Influence of recycled aggregate quality and proportioning criteria on recycled concrete properties", Waste Manage., 29(12), 3022-3028. https://doi.org/10.1016/j.wasman.2009.07.010.
  20. Montgomery D.C. (2013), Design and Analysis of Experiments, Wiley India Pvt. Ltd., New Delhi, India.
  21. Moura, W.A., Goncalves, J.P. and Lima, M.B.L. (2007), "Copper slag waste as a supplementary cementing material to concrete", J. Mater. Sci., 42(7), 2226-2230. https://doi.org/10.1007/s10853-006-0997-4.
  22. Mukharjee, B.B. and Barai S.V. (2014a), "Characteristics of Mortars containing colloidal Nano-silica", Int. J. Appl. Eng. Res., 9(1), 17-22.
  23. Mukharjee, B.B. and Barai, S.V. (2014b), "Assessment of the influence of nano-silica on behavior of mortar using factorial design of experiments", Constr. Build. Mater., 68, 29-37. https://doi.org/10.1016/j.conbuildmat.2014.06.074.
  24. Mukharjee, B.B. and Barai, S.V. (2014c), "Influence of incorporation of nano-silica and recycled aggregates on compressive strength and microstructure of concrete", Constr. Build. Mater., 71, 570-578. https://doi.org/10.1016/j.conbuildmat.2014.08.040.
  25. Mukharjee, B.B. and Barai, S.V. (2014d), "Influence of nano-silica on the properties of recycled aggregate concrete", Constr. Build. Mater., 55, 29-37. https://doi.org/10.1016/j.conbuildmat.2014.01.003.
  26. Mukharjee, B.B. and Barai, S.V. (2015a), "Characteristics of sustainable concrete incorporating recycled coarse aggregates and colloidal nano-silica", Adv. Conc. Constr., 3(3), 187-202. http://dx.doi.org/10.12989/acc.2015.3.3.187.
  27. Mukharjee, B.B. and Barai, S.V. (2015b), "Development of construction materials using nano-silica and aggregates recycled from construction and demolition waste", Waste Manage. Res., 33(6), 515-523. https://doi.org/10.1177/0734242X15584840.
  28. Nixon, P.J. (1978), "Recycled concrete as an aggregate for concrete-a review", Mater. Struct., 11(65), 371-378. http://dx.doi.org/10.1007/BF02473878.
  29. Pacheco-Torgal, F., Miraldo, S., Din, Y. and Labrincha, J.A. (2013), "Targeting HPC with the help of nanoparticles: An overview", Constr. Build. Mater., 38, 365-370. https://doi.org/10.1016/j.conbuildmat.2012.08.013.
  30. Park, W.J., Noguchi, T. and Lee, H.S. (2013), "Genetic algorithm in mix proportion design of recycled aggregate concrete", Comput. Concrete, 11(3), 183-199. https://doi.org/10.12989/cac.2013.11.3.183.
  31. Prusty, R., Mukharjee, B.B. and Barai, S.V. (2015), "Nano-engineered concrete using recycled aggregates and nano-silica: Taguchi approach", Adv. Conc. Constr., 3(4), 253-268. http://dx.doi.org/10.12989/acc.2015.3.4.253.
  32. Rakshvir, M. and Barai, S.V. (2006), "Studies on recycled aggregates-based concrete", Waste Manage. Res., 24(3), 225-233. https://doi.org/10.1177/0734242X06064820.
  33. Rao, M.C., Bhattacharyya, S.K. and Barai, S.V. (2011), "Influence of field recycled coarse aggregate on properties of concrete", Mater. Struct., 44(1), 205-220. https://doi.org/10.1617/s11527-010-9620-x.
  34. Said, A.M., Zeidan, M.S., Bassuoni, M.T. and Tian, Y. (2012), "Properties of concrete incorporating nano-silica", Constr. Build. Mater., 36, 838-844. https://doi.org/10.1016/j.conbuildmat.2012.06.044.
  35. Saravanakumar, P. and Dhinakaran, G. (2013), "Durability characteristics of recycled aggregate concrete", Struct. Eng. Mech., 47(5), 701-711. https://doi.org/10.12989/sem.2013.47.5.701.
  36. Shah, A., Jan, I.U., Khan, R.U. and Qazi, E.U. (2013), "Experimental investigation on the use of recycled aggregates in producing concrete", Struct. Eng. Mech., 47(4), 545-557. https://doi.org/10.12989/sem.2013.47.4.545.
  37. Spaeth, V. and Tegguer, A.D. (2013), "Improvement of recycled concrete aggregate properties by polymer treatments", Int. J. Sust. Built Environ., 2(2), 143-152. https://doi.org/10.1016/j.ijsbe.2014.03.003.
  38. Taha, R., Al-Nuaimi, N., Kilayli, A. and Salem, A.B. (2014), "Use of local discarded materials in concrete", Int. J. Sust. Built. Environ., 3(1), 35-46. https://doi.org/10.1016/j.ijsbe.2014.04.005.
  39. Tam, V.W.Y. and Tam, C.M. (2008), "Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAsc", Constr. Build. Mater., 22(10), 2068-2077. https://doi.org/10.1016/j.conbuildmat.2007.07.024.
  40. Trankler, J., Walker, I. and Dohman, M. (1996), "Environmental impact of demolition waste-an overview on 10 years of research and experience", Waste Manage., 16(1-3), 21-26. https://doi.org/10.1016/S0956-053X(96)00061-X.

피인용 문헌

  1. Axial compression performance of basalt-fiber-reinforced recycled-concrete-filled square steel tubular stub column vol.10, pp.6, 2019, https://doi.org/10.12989/acc.2020.10.6.559