Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

Mechanical and Fire Resistance Properties of Surface Preparation Mortar in Buildings Using Expanded Graphite

팽창흑연을 활용한 건축물 외단열 바탕조정재의 역학 및 연소 특성평가

  • Received : 2019.11.04
  • Accepted : 2019.12.10
  • Published : 2019.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

In the case of fire, surface treatment agents used in external insulation finishing methods are substances that are vulnerable to fire due to thin finishes and the combustion of polymers. In this study, it was expected that the performance of surface preparation mortars could be improved by using expandable graphite with excellent thermal performance. Experimental results showed that the mechanical properties of surf ace preparation mortar were improved by using the fly ash and silica fume. Surface treatment materials using expanded graphite have a characteristic of expanding when a fire occurs. It has been shown that heat-swellable surface treatment materials can reduce the penetration of heat sources into the surface of synthetic insulation.

외단열 마감 공법에서 사용되는 바탕조정재는 화재가 발생하는 경우 얇은 마감과 폴리머의 연소로 인해 표면부가 급속하게 붕괴되어 화재에 취약한 소재이다. 본 연구에서는 열적 성능이 우수한 팽창 흑연을 사용할 경우 바탕조정재의 성능을 개선할 수 있을 것으로 기대하였다. 실험결과, 팽창흑연을 사용한 바탕조정재는 부착강도 저하 및 물흡수계수 등의 감소가 발생하는 문제점이 있으나 플라이애시와 실리카흄을 사용하여 물리적 성능이 향상되는 것으로 나타났다. 팽창흑연을 사용한 바탕조정재는 복합 단열 시험체 표면의 페놀폼은 화염에 의한 표면 뚫림이 나타나지 않아 열원의 투과를 감소시킬 수 있을 것으로 나타났다.

Keywords

References

  1. Chang, J.H., Choi, S.M. (2013). Workability evaluation of the inorganic surface preparation materials including EVA redispersible polymer powder for wall, Journal of the Architectural Institute of Korea Structure & Construction, 29(11), 53-62. https://doi.org/10.5659/JAIK_SC.2013.29.11.53
  2. Chuigen, G., Lin, Z., Jianxiong, L. (2013). Effects of expandable graphite and modified ammonium polyphosphate on the flame-retardant and mechanical properties of wood flour-polypropylene composites, Polymers & Polymer Composites, 21(7), 449-56. https://doi.org/10.1177/096739111302100706
  3. Kim, W.K., Kim, D.M. (2014). Properties of acrylic emulsion mortar using pyroligneous liquid of wood by-product, Journal of Korea Society of Waste Management, 31(1), 70-78. https://doi.org/10.9786/kswm.2014.31.1.70
  4. Lee, J.C., Park, J.C., Song, H. (2016). Effect of external thermal insulation composite system with a non-combustible calcium silicate based mineral on the mitigation for reducing fast spread of flame, Journal of the Korea Institute of Building Construction. 16(5), 397-403. https://doi.org/10.5345/JKIBC.2016.16.5.397
  5. Lee, J.C., Seo, J.S., Kim, S.B. (2013). Study on flame retardancy and thermal resistance properties of phenolic foam and polyurethane foam, Journal of the Korean Institute of Gas, 17(1), 35-41. https://doi.org/10.7842/kigas.2013.17.1.35
  6. Min, S.H., Kim, M.S. (2010). A study on the fire risk assessment of EIFS by cone calorimeter test & single burning item test, Journal of the Korea Safety Management and Science, 12(1), 1-9.
  7. Yang, E.H., Yang, Y., Li, V.C. (2007), Use of high volumes of fly ash to improve ecc mechanical properties and material greenness, ACI Materials Journal, 104(6), 303-11.