DOI QR코드

DOI QR Code

Automatic design, planning and drawing of scaffolding system for constructions

  • 투고 : 2018.09.27
  • 심사 : 2019.02.28
  • 발행 : 2019.04.25

초록

Temporary scaffold systems in the construction site play an important role for ensuring the safety of the workers and for constructing the stable structures. To assemble the scaffold, the pipe scaffolding system, the wedge binding scaffolding system and the particular materials have been utilized. To design the material arrangement of a scaffold, firstly the configuration was determined considering the construction geometry. Then, the strength of the scaffold was confirmed and the quantity of the material was accounted. In this paper, the design method of the temporary scaffold was proposed for intending the semi-automatic procedure. In the proposed design method, the geometric design and the safety requirement were specified by the safety standard and the design flow was followed by the designer's knowledge. The size and the quantities of the materials were calculated by referring to the relation between the scaffold and the constructing structure. In the calculating procedure, three dimensional positions of each scaffold materials were calculated and recorded simultaneously. Then, three dimensional scaffold structural was drawn semi-automatically on the CAD software by using the obtained material sizes, positions and directions. The proposed design method provides us the precise quantities of scaffold materials and enables us to reduce the design effort and the cost estimation processes. In addition, the obtained results can be applied to BIM software after converting to IFC format.

키워드

참고문헌

  1. ACI 318-14 (2014), Building code requirements for structural concrete (ACI 318-14), American Concrete Institute, Michigan, U.S.A.
  2. Autodesk (2018), AutoCAD Quick Answer; Autodesk, California, U.S.A., https://adndevblog.typepad.com/technology_perspective/2018/04/autocad-2019-quick-answer-guide.html
  3. Cowburn, P. (2018), PHP Manual; php.net, https://www.php.net/manual/en/index.php
  4. Hara, T. and Shimomura, K. (2018), "Design and planning of scaffolding system", Streamlining Information Transfer between Construction and Structural Engineering, Queensland, Australia, December.
  5. Hara, T., Hamano, K. and Miyake, S. (2018), "Advanced design and planning of scaffolding system for construction", Proceedings of 17th International Conference on Computing in Civil and Building Engineering, Tampere, Finland, July.
  6. Hyuna, C., Jina, C., Shenc, Z. and Kimb, H. (2018), "Automated optimization of formwork design through spatial analysis in building information modeling", Automat. Construct., 95, 193-205. https://doi.org/10.1016/j.autcon.2018.07.023
  7. Kim, H. and Teizer, J. (2014), "Automatic design and planning of scaffolding systems using building information modeling", Adv. Eng. Informat., 28, 66-80. https://doi.org/10.1016/j.aei.2013.12.002
  8. Liu, C., He, L., Wua, Z. and Yuan, J. (2018), "Experimental and numerical study on lateral stability of temporary structures", Arch. Civil Mech. Eng., 18, 1478-1490. https://doi.org/10.1016/j.acme.2018.06.002
  9. Ministry of Health, Labor and Welfare (2010), Occupational Safety and Health Regulations, Ministry of Government Legislation, Republic of Korea.
  10. Rubio-Romero, J.C., Gamez, C.R. and Carrillo-Castrillo, J.A. (2013), "Analysis of the safety conditions of scaffolding on construction sites", Safety Sci., 55, 160-164. https://doi.org/10.1016/j.ssci.2013.01.006
  11. Temporary Works forum (2014), The Use of European Standards for Temporary Works Design, United Kingdom, https://www.twforum.org.uk/viewdocument/the-use-of-european-standards-for-t.

피인용 문헌

  1. The methodology of storing the information model of building structures at various stages of the life cycle vol.1425, 2019, https://doi.org/10.1088/1742-6596/1425/1/012156
  2. A semi-automated method for integrating textural and material data into as-built BIM using TIS vol.5, pp.2, 2019, https://doi.org/10.12989/acd.2020.5.2.127
  3. Building Information Modelling (BIM) to Enhance Occupational Safety in Construction Activities: Research Trends Emerging from One Decade of Studies vol.10, pp.6, 2019, https://doi.org/10.3390/buildings10060098