Fig. 1. Example set-up of impingement rods
Fig. 2. Designed Shell&Tube Heat Exchanger
Fig. 3. Numerical Analysis model
Fig. 4. Results for velocity streamline
Fig. 5. Line data information and Total pressure data graph
Fig. 6. Velocity vector in y-z plane
Fig. 7. Point data information & Total pressure at each points
Table 1. The geometric details of basic case
Table 2. Pre-process information
Table 3. Mesh independent test
Table 4. Average total pressure data
References
- Ramesh K. Shah,Dusan P. Sekulic, "Fundamentals of Heat Exchanger Design", JOHN WILEY & SONS, INC, 2003.
- Richard C. Byrne, "STANDARD OF TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION", TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION, INC., pp. 10-16-18, 2007.
- 정태진, "열교환기 구조설계 표준서", 세화 E&T 주식회사, pp. 49-51.
- Saunders, E. A. D., "Heat Exchangers Selection, Design, and Construction", JohnWiley and Sons, NewYork, 1988.
- Meter, F. R., "Two-Equation EddyViscosity Turbulence Models for Engineering, 1994.
- R.K. Shah, W.M. Rohsenow, J.P. Hartnett, Y.I. Cho, "Handbook of Heat Transfer", McGraw-Hill, New York, Chapter 17, 1998.