DOI QR코드

DOI QR Code

Prussian blue immobilization on various filter materials through Layer-by-Layer Assembly for effective cesium adsorption

  • Wi, Hyobin (Department of Environmental Engineering, Seoul National University of Science and Technology) ;
  • Kim, Hyowon (Department of Environmental Engineering, Seoul National University of Science and Technology) ;
  • Kang, Sung-Won (Environmental and Plant Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Hwang, Yuhoon (Department of Environmental Engineering, Seoul National University of Science and Technology)
  • 투고 : 2018.09.27
  • 심사 : 2018.12.14
  • 발행 : 2019.05.25

초록

Prussian blue (PB) is well known for its excellent $Cs^+$ ions adsorption capacity. Due to the high dispersibility of PB in aqueous phase, composite materials imbedding PB in supporting materials have been introduced as a solution. However, building PB particles inside porous supporting materials is still difficult, as PB particles are not fully formed and elute out to water. In this study, we suggest layer-by-layer (LBL) assembly to provide better immobilization of PB on supporting materials of poly vinyl alcohol sponge (PVA) and cellulose filter (CF). Three different PB attachment methods, ex-situ/in-situ/LBL assembly, were evaluated using PB leaching test as well as $Cs^+$ adsorption test. Changes of surface functionality and morphology during PB composite preparation protocols were monitored through Fourier transform infrared spectroscopy and scanning electron microscopy. The results indicate that LBL assembly led to better PB attachment on supporting materials, bringing less eluting PB particles in aqueous phase compared to other synthesis methodologies, such as ex-situ and in-situ synthesis. By enhancing the stability of the adsorbent, adsorption capacity of PVA-PB with LBL improved nine times and that of CF-PB improved over 20 times. Therefore, the results suggest that LBL assembly offers a better orientation for growing PB particles on porous supporting materials.

키워드

과제정보

연구 과제 주관 기관 : National Research Council of Science and Technology (NST)

참고문헌

  1. Garside, P. and Wyeth, P. (2003), "Identification of cellulosic fibres by FTIR spectroscopy - Thread and single fibre analysis by attenuated total reflectance", Stud. Conserv., 48(4), 269-275. https://doi.org/10.1179/sic.2003.48.4.269.
  2. Ishizaki, M., Kanaizuka, K., Abe, M., Hoshi, Y., Sakamoto, M., Kawamoto, T., Tanaka, H. and Kurihara, M. (2012), "Preparation of electrochromic Prussian blue nanoparticles dispersible into various solvents for realisation of printed electronics", Green Chem., 14(5), 1537-1544. http://doi.org/10.1039/C2GC35079C.
  3. Itaya, K., Uchida, I. and Neff, V.D. (1986). "Electrochemistry of polynuclear transition metal cyanides: Prussian blue and its analogues", Accounts Chem. Res., 19(6), 162-168. https://doi.org/10.1021/ar00126a001.
  4. Jang, S.C., Hong, S.B., Yang, H.M., Lee, K.W., Moon, J.K., Seo, B.K., Huh, Y.S. and Roh, C. (2014), "Removal of radioactive cesium using prussian blue magnetic nanoparticles", Nanomaterials, 4(4), 894-901. https://doi.org/10.3390/nano4040894.
  5. Lee, K., Jutidamrongphan, W., Lee, S. and Park, K.Y. (2017), "Adsorption kinetics and isotherms of phosphate and its removal from wastewater using mesoporous titanium oxide", Membr. Water Treat., 8(2), 161-169. https://doi.org/10.12989/mwt.2017.8.2.161.
  6. Lee, T., Min, S.H., Gu, M., Jung, Y.K., Lee, W., Lee, J.U., Seong, D.G. and Kim, B.S. (2015), "Layer-by-Layer assembly for graphene-based multilayer nanocomposites: Synthesis and applications", Chem. Mater., 27(11), 3785-3796. https://doi.org/10.1021/acs.chemmater.5b00491.
  7. Mansur, H.S., Sadahira, C.M., Souza, A.N. and Mansur, A.A.P. (2008), "FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde", Mater. Sci. Eng. C., 28(4), 539-548. https://doi.org/10.1016/j.msec.2007.10.088.
  8. Montazer, M. and Maali Amiri, M. (2014), "ZnO nano reactor on textiles and polymers: Ex Situ and In Situ synthesis, application, and characterization", J. Phys. Chem. B., 118(6), 1453-1470. https://doi.org/10.1021/jp408532.
  9. Oughlis-Hammache, F., Skiba, M., Hallouard, F., Moulahcene, L., Kebiche-Senhadji, O., Benamor, M. and Lahiani-Skiba, M. (2016), "Synthesis and characterization of poly(vinyl-alcohol)-poly(${\beta}$-cyclodextrin) copolymer membranes for aniline extraction", Membr. Water Treat., 7(3), 223-240, http://dx.doi.org/10.12989/mwt.2016.7.3.223.
  10. Richardson, J.J., Cui, J., Bjornmalm, M., Braunger, J.A., Ejima, H. and Caruso, F. (2016), "Innovation in layer-by-layer assembly", Chem. Rev., 116(23), 14828-14867. https://doi.org/10.1021/acs.chemrev.6b00627.
  11. Vincent, C., Barre, Y., Vincent, T., Taulemesse, J.M., Robitzer, M. and Guibal, E. (2015), "Chitin-Prussian blue sponges for Cs(I) recovery: From synthesis to application in the treatment of accidental dumping of metal-bearing solutions", J. Hazard. Mater., 287, 171-179. https://doi.org/10.1016/j.jhazmat.2015.01.041.
  12. Vincent, T., Taulemesse, J.M., Dauvergne, A., Chanut, T., Testa, F. and Guibal, E. (2014), "Thallium(I) sorption using Prussian blue immobilized in alginate capsules", Carbohyd. Polym., 99, 517-526. https://doi.org/10.1016/j.carbpol.2013.08.076.
  13. Vipin, A.K., Fugetsu, B., Sakata, I., Isogai, A., Endo, M., Li, M. and Dresselhaus, M.S. (2016), "Cellulose nanofiber backboned Prussian blue nanoparticles as powerful adsorbents for the selective elimination of radioactive cesium", Sci. Rep., 6, 37009. http://doi.org/0.1038/srep37009. https://doi.org/10.1038/srep37009
  14. Yang, H., Li, H., Zhai, J., Sun, L., Zhao, Y. and Yu, H. (2014), "Magnetic prussian blue/graphene oxide nanocomposites caged in calcium alginate microbeads for elimination of cesium ions from water and soil", Chem. Eng. J., 246, 10-19. https://doi.org/10.1016/j.cej.2014.02.060.