Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Flexural Behavior of Granite Reinforced with Titanium Metal Rods

티타늄 금속봉으로 보강된 화강암의 휨거동

  • Received : 2019.02.10
  • Accepted : 2019.03.25
  • Published : 2019.04.30
⟨ Previous Next ⟩

Abstract

In this study, flexural tests of granite reinforced with titanium metal rods were carried out to repair and restore the damaged stone-made cultural heritage, the Stone Pagoda of the Mireuksa Temple Site. A total of twelve specimens were tested. The primary test parameters are the reinforcement ratio and the location of the reinforcement. For restoration, epoxy resin was used for joining the separated stones, and titanium metal rods were used for structural reinforcement. Test results showed that the flexural failure took place in specimens with a reinforcement ratio of 0.8% or less, and shear failure occurred when the reinforcement ratio was 1.68% or more. The peak load of the reinforced stone was found to be highly related to the reinforcement ratio. The peak load increased with increasing the reinforcement ratio. Also, the flexural behaviors of the reinforced stones were affected by the location of the reinforcement. Based on the test results, this study recommends the reinforcement ratio of the reinforced granite to induce ductile behavior.

Keywords

Acknowledgement

Supported by : 원광대학교

References

  1. ASTM C78 / C78M-18, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, West Conshohocken, PA, 2018.
  2. ASTM C880 / C880M-18, Standard Test Method for Flexural Strength of Dimension Stone, ASTM International, West Conshohocken, PA, 2018.
  3. KCI (2012). Design Codes for Concrete Structures, Kimoondang.
  4. Korea Institute of Construction Safety Technology (1998). Structural safety diagnosis for the Stone Pagoda of the Mireuksa Temple Site, Jeonbuk, 238.
  5. KS B 0801 (2007). The pieces for tension test for metallic materials, Korean Standard Association.
  6. KS B 0802 (2003) Method of Tensile Test for Metallic Materials, Korean Standard Association.
  7. KS F 2423 (2006). Method of test for splitting tensile strength of concrete, Korean Standard Association.
  8. Lim, W. & Hong, S. (2015). Flexural behavior of stainless reinforced granite member in the Stone Pagoda of Mireuksa Temple Site, Journal of the Architectural Institute of Korea (Structure & Construction), 31(2) 29-31. https://doi.org/10.5659/JAIK_SC.2015.31.2.29
  9. Lim, W., Lee, D., & Hong, S. (2015). Edge distance of metal rod reinforced flexural members in the Stone Pagoda of the Mireuk Temple Site, Journal of the Architectural Institute of Korea (Structure & Construction), 31(6), 3-13.
  10. National Research Institute of Cultural Heritage (2003). Report on Dismantlement for the Stone Pagoda of the Mireuksa Temple Site I, Jeounbuk. 311.
  11. National Research Institute of Cultural Heritage (2004). Report on Dismantlement for the Stone Pagoda of the Mireuksa Temple Site II, Jeounbuk. 421.
  12. National Research Institute of Cultural Heritage (2005). Report on Dismantlement for the Stone Pagoda of the Mireuksa Temple Site III, Jeounbuk. 375.
  13. Yang, H., Lee, C., Choi, S., & Lee, M. (2006). Petrological Characteristics and Provenance Presumption for Rock Properties of the Stone Pagoda in Mireuksaji Temple Site, Iksan, Korea, Journal of the Geological Society of Korea, 42(2), 293-306.
  14. Zambas C., Ioannidou M. and Papanicolaou A. (1986). The use of titanium reinforcement for the restoration of marble architectural members of Acropolis Monuments, Proc. IIC Congress, Bologna, 138-141.
  15. Zambas C. (1992). Structural repairs to the monuments of the Acropolis-The Parthenon, Proceedings of the Institution of Civil Engineers, 166-176.