DOI QR코드

DOI QR Code

Design and Analysis of A Pico Propeller Hydro Turbine Applied in Fish Farms using CFD and Experimental Method

  • Tran, Bao Ngoc (Graduate School of Mokpo National Maritime University) ;
  • Kim, Jun-ho (Division of Marine Mechatronics, Mokpo National Maritime University)
  • Received : 2019.05.03
  • Accepted : 2019.05.28
  • Published : 2019.05.31

Abstract

In this paper, a pico hydro turbine employing low head circulation water at fish farms is designed and evaluated. Due to the advantages of simple structures, small head requirements, and low-cost investment, the constant thickness propeller turbine is considered as a feasible solution. The design process based on the free vortex method is presented in full detail, and a 4-blade runner is built using BladeGen. The turbine performance is analyzed both numerically and via experimental methods. Despite slight differences, the results show similar trends between CFD simulations and experiments carried out on factory test-rigs in a wide range of working conditions. At the design flow rate, the turbine achieves the best efficiency of 70 %, generating 3.5 kW power when rotating at 420 rpm. The internal flow field, as well as the turbine's behavior, are investigated through the distribution of blade streamlines, pressure, and velocity around the runner. Moreover, the pressure coefficient on the blade surface at 3 span positions is plotted while the head loss for each simulation domain is calculated and displayed by charts.

Keywords

References

  1. Simpson, R. and A. Williams(2011), Design of propeller turbines for pico hydro, Available at www.picohydro.org.uk.
  2. Lee, N. J., J. W. Choi, Y. H. Hwang and Y. H. Lee(2012), Performance analysis of a counter-rotating tubular type micro-turbine by experiment and CFD, 26th IAHR Sym, Hydraulic Machinery & Systems Proceeding, pp. 1-8.
  3. Alexander, K. V., E. P. Giddens, and A. M. Fuller(2009), Axial-flow turbines for low head microhydro systems, Renewable Energy, Vol. 34, No. 1, pp. 35-47. https://doi.org/10.1016/j.renene.2008.03.017
  4. Samora, I., V. Hasmatuchi, C. M. Alligne and M. J. Fanca(2016), Experimental characterization of a five blade tubular propeller turbine for pip inline installation, Renewable Energy, Vol. 95, pp. 356-366. https://doi.org/10.1016/j.renene.2016.04.023
  5. Singh, P. and F. Nestmann(2009), Experimental optimization of a free vortex propeller runner for micro hydro application, Exp. Thermal and Fluid Science, Vol. 33, No. 6, pp. 991-1002. https://doi.org/10.1016/j.expthermflusci.2009.04.007
  6. Muis, A. and P. Sutikno(2014), Design and simulation of very low head axial hydraulic turbine with variation of swirl velocity criterion, Int. J. Fuild Machinery and System, Vol. 7, No. 2, pp. 68-79. https://doi.org/10.5293/IJFMS.2014.7.2.068
  7. Dixon, S. L.(2004), Fluid Mechanics Thermodynamics of Turbo Machinery-5th Edition, Elsevier B. Heinemann.
  8. Vu, V. L., Z. Chen and Y. D. Choi(2018), Design and performance of a pico propeller hydro turbine model, J. Fluid Machinery, Vol. 21, No. 3, pp. 44-51. https://doi.org/10.5293/kfma.2018.21.3.044
  9. Byeon, S. S. and Y. J. Kim(2013), Influence of Blade Number on the Flow Characteristics in the Vertical Axis Propeller Turbine, Int. J. Fuid Machinery and Systems, Vol. 6, No. 3, pp. 144-150. https://doi.org/10.5293/IJFMS.2013.6.3.144
  10. Chen, Z., J. C. Kim, M. H. Im, and Y. D. Choi(2014), Analysis on the performance and internal flow of a tubular type hydro turbine for vessel cooling system. J. Korean Society of Marine Engineering. Vol. 38, No. 10, pp. 1244-1250. https://doi.org/10.5916/jkosme.2014.38.10.1244

Cited by

  1. Effects of Tip Clearance Size on Energy Performance and Pressure Fluctuation of a Tidal Propeller Turbine vol.13, pp.16, 2019, https://doi.org/10.3390/en13164055
  2. The Efficiency Comparison of Hydro Turbines for Micro Power Plant from Free Vortex vol.14, pp.23, 2019, https://doi.org/10.3390/en14237961