한국추진공학회지 (Journal of the Korean Society of Propulsion Engineers)

  • 제23권1호
  • /
  • Pages.108-115
  • /
  • 2019
  • /
  • 1226-6027(pISSN)
  • /
  • 2288-4548(eISSN)
한국추진공학회 (The Korean Society of Propulsion Engineers)
권호 표지
DOI QR코드

DOI QR Code

탄성내열재 배합 환경에 따른 내열 성능 변화에 관한 연구

A Study on the Thermal Protection Performance of Elastomeric Insulators in Different Mixing Environments

  • 투고 : 2018.06.15
  • 심사 : 2018.11.21
  • 발행 : 2019.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

고온 고압의 연소가스로부터 구조물을 보호하는 탄성내열재는 재료 조성 및 열환경 조건에 따라 열반응에 차이를 보인다. 본 논문에서는 탄성내열재의 배합 환경 변화에 따른 열반응 특성을 비교하였다. 탄성내열재의 내열 성능 시험은 내열고무성능평가장치(TPREM)를 이용하였으며, 연소실 압력 1,000 psig에서 연소가스속도를 각각 20 m/s과 100 m/s로 시험하였다. 연소실 압력-시간 선도, 재료 내부 온도-시간 선도, 탄성내열재 시편의 잔류 두께 및 열파괴두께를 획득하였다. 배합 환경에 따른 탄성내열재의 내열 성능은 유사하였다.

The thermal response of elastomeric insulators used as protection against high-temperature and high-pressure combustion gases varies depending on their composition and thermal environment conditions. In this paper, the thermal response characteristics of elastomeric insulators in different mixing environments were compared. Tests to determine thermal protection performance were carried out using a thermal protection rubber evaluation motor(TPREM), combustion gas velocities of 20 m/s and 100 m/s were tested at a chamber pressure of 1,000 psig. The pressure time curve of the chamber, the temperature time curve of the internal materials, the residual thickness and the thermal destruction depth of the test specimens were obtained. The results showed that the thermal protection performance of elastomeric insulators in different mixing environments was similar.

키워드

참고문헌

  1. Ahmed, A.F., "Thermal Insulation by Heat Resistant Polymers," PhD Theisis, Mechanical and Industiral Engineering, Concordia University, Montreal, Quebec, Canada, 2009.
  2. Ahmed, A.F. and Hoa, S.V., "Thermal Insulation by Heat Resistant Polymers for Solid Rocket Motor Insulation," Journal of Composite Materials, Vol. 46, No. 13, pp. 1549-1559, 2011. https://doi.org/10.1177/0021998311418850
  3. McWhorter, B., Ewing, M., Albrechtse, K., Noble, T. and Longaker, M., "Real-Time Measurements of Aft Dome Insulation Erosion on Space Shuttle Reusable Solid Rocket Motor," 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Fort Lauderdale, F. L., U.S.A., AIAA 2004-3896, Jul. 2004.
  4. Sheu, S.M., Chu, H.T. and Chou, J.H., “Experimental Study of Ablative Materials by Oxyacetylene Flame Flow System,” Journal of Propulsion and Power, Vol. 27, No. 5, pp. 1108-1113, 2011. https://doi.org/10.2514/1.B34055
  5. Lee, H.S., Kang, Y.G., Lim, S.Y., Oh, J.Y. and Lee, K.H., "A New Test Method to Evaluate Influence of $Al_2O_3$ to Rubber Insulator in Solid Propellant Rocket Motor," Journal of the Korean Society of Propulsion Engineers, Vol. 5, No. 3, pp. 9-14, 2011.
  6. Kang, Y.G. and Park, J.H., "A Comparison with Thermal Reaction Characteristic of Kevlar/EPDM Internal Insulator by Change of Chamber Pressure," Journal of the Korean Society of Propulsion Engineers, Vol. 20, No. 3, pp. 71-77, 2016. https://doi.org/10.6108/KSPE.2016.20.3.071
  7. Koo, J.H., "Numerical Investigation of Thermo-Chemical and Mechanical Erosion of Ablative Matrials," AIAA/SAE/ASME//ASEE 29th Joint Propulsion Conference and Exhibit, Monterey, C.A., U.S.A., AIAA 93-2045, June, 1993.
  8. Liu, Y., Yu, X.J., Ma, J.M., Guan, Y.W., Li J., Li, Q. and Yang, S., "A Volumetric Ablation Model of EPDM Considering Complex Physicochemical Process in Porous Structure of Char Layer," Open Physics, Vol. 15, No. 1, pp. 344-353, 2017. https://doi.org/10.1515/phys-2017-0038
  9. Yezzi, C.A. and Moore, B.B., "Characterization of Kevlar/EPDM Rubbers for Use as Rocket Motor Case Insulators," AIAA/ASME/SAE/ASEE 22nd Joint Propulsion Conference, Huntsville, A.L., U.S.A., AIAA-86-1489, June, 1986.
  10. Kang, Y.G. and Park, J.H., "A Development of Test Equipment for Thermal Protection Performance on Insulator used in Rocket Motor Chamber," Journal of the Korean Society of Propulsion Engineers, Vol. 20, No. 3, pp. 32-36, 2016. https://doi.org/10.6108/KSPE.2016.20.3.032
  11. Kang, Y.G., Yun, D.J., Kim, S.Y., Lee, J.S. and Kwon, T.H., "A Development of Test Equipment for Thermal Protection Performance on Insulator used in Solid Rocket Motor," Proceeding of the KSPE Spring Conference, pp. 543-546, 2017.