DOI QR코드

DOI QR Code

Seismic response analysis of isolated offshore bridge with friction sliding bearings

  • Wang, Baofu (Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology) ;
  • Han, Qiang (Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology) ;
  • Jia, Junfeng (Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology)
  • 투고 : 2018.10.18
  • 심사 : 2019.03.26
  • 발행 : 2019.06.25

초록

This paper investigates the seismic response of a typical non-navigable continuous girder bridge isolated with friction sliding bearings of the Hong Kong-Zhuhai-Macao link projects in China. The effectiveness of the friction pendulum system (FPS) and accuracy of the numerical model were evaluated by a 1/20 scaled bridge model using shaking table tests. Based on the hysteretic properties of friction pendulum system (FPS), double concave friction pendulum (DCFP), and triple friction pendulum system (TFPS), seismic response analyses of isolated bridges with the three sliding-type bearings are systematically carried out considering soil-pile interaction under offshore soft clay conditions. The fast nonlinear analysis (FNA) method and response spectrum are employed to investigate the seismic response of isolated offshore bridge structures. The numerical results show that the implementation of the three sliding-type bearings effectively reduce the base shear and bending moment of the reinforced concrete pier, at the cost of increasing the absolute displacement of the bridge superstructure. Furthermore, the TFPS and DCFP bearings show better isolation effect than FPS bearing for the example continuous girder bridge.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China (NSFC), Central Universities

참고문헌

  1. Amiri, G.G., Shalmaee, M.M. and Namiranian, P. (2016), "Evaluation of a DDB design method for bridges isolated with triple pendulum bearings", Struct. Eng. Mech., 59(5), 803-820. http://dx.doi.org/10.12989/sem.2016.59.5.803.
  2. API RP 2A -WSD (2000), Recommended Practice for Planning, Design and Constructing Fixed Offshore Platforms, American Petroleum Institute,Washington, USA.
  3. Billah, A.H.M.M. and Alam, M.S. (2016), "Performance-based seismic design of shape memory alloy-reinforced concrete bridge piers. I: Development of performance-based damage States", J. Struct. Eng., 142(12), 04016140. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001458.
  4. Castaldo, P., Palazzo, B. and Vecchia, P.D. (2015), "Seismic reliability of base-isolated structures with friction pendulum bearings", Eng. Struct., 95, 80-93. https://doi.org/10.1016/j.engstruct.2015.03.053.
  5. Catalan, A. and Foti, D. (2015), "Multilevel performance-based procedure applied to moderate seismic zones in Europe", Earthq. Struct., 8(1), 57-76. http://dx.doi.org/10.12989/eas.2015.8.1.057.
  6. Constantinou, M.C. (2004), "Friction pendulum double concave bearing", NEES Report, the University at Buffalo, New York, USA.
  7. Du, X.L. (2016), "Earthquake damage mechanism and life-cycle performance design and control of the offshore traffic infrastructure engineering", Research Report of National Program on Key Basic Research Project of China, Beijing University of Technology, Beijing, China.
  8. Eurocode 8 (2005), EN1998-2, draft, Design of Structures for Earthquake Resistance, Part 2: Bridges, European Committee for Standardization, Brussels, Belgium.
  9. Fadi, F. and Constantinou, M.C. (2010), "Evaluation of simplified methods of analysis for structures with triple friction pendulum isolators", Earthq. Eng. Struct. Dyn., 39(1), 5-22. http://dx.doi.org/10.1002/eqe.930.
  10. Faramarz, K. and Montazar, R. (2010), "Seismic response of double concave friction pendulum base-isolated structures considering vertical component of earthquake", Adv. Struct. Eng., 13(1), 1-14. https://doi.org/10.1260/1369-4332.13.1.1.
  11. Fenz, D.M. and Constantinou, M.C. (2006), "Behaviour of the double concave friction pendulum bearing", Earthq. Eng. Struct. Dyn., 35, 1403-1424. http://dx.doi.org/ 10.1002/eqe.589.
  12. Fenz, D.M. and Constantinou, M.C. (2008a), "Spherical sliding isolation bearings with adaptive behavior: theory", Earthq. Eng. Struct. Dyn., 37, 163-183. http://dx.doi.org/10.1002/eqe.751.
  13. Fenz, D.M. and Constantinou, M.C. (2008b), "Spherical sliding isolation bearings with adaptive behavior: experimental verification", Earthq. Eng. Struct. Dyn., 37, 185-205. http://dx.doi.org/10.1002/eqe.750.
  14. Fenz, D.M. and Constantinou, M.C. (2008c), "Modeling triple friction pendulum bearings for response-history analysis", Earthq. Spectra, 24(4), 1011-1028. http://dx.doi.org/10.1193/1.2982531.
  15. Han, Q., Du, X.L., Liu, J.B., Liu, Z.X., Li, L.Y. and Zhao, J.F. (2009), "Seismic damage of highway bridges during 2008 Wenchuan earthquake", Earthq. Eng. Eng. Vib., 8(2), 263-273. http://dx.doi.org/10.1007/s11803-009-8162-0.
  16. Han, Q., Liu, W.G. and Du, X.L. (2012), "Computational model and experimental validation of multi-spherical sliding friction isolation bearings", Chin. J. Highw. Transp., 25(5), 82-88. http://dx.doi.org/10.19721/j.cnki.1001-7372.2012.05.013.
  17. Heidari, M., Jahanandish, M., Naggar, H.E. and Ghahramani, A. (2014), "Nonlinear cyclic behavior of laterally loaded pile in cohesive soil", Can. Geotech. J., 51(2), 129-143. http://dx.doi.org/10.1139/cgj-2013-0099.
  18. JTG/T B02-01-2008, Guideline for seismic design of highway bridges, Ministry of Transport of the People's Republic of China; Beijing China.
  19. Kang, Q., Huang, X.Y., Chen, J.Q. and Zhou, L. (2014), "Seismic response analysis of multi-span continuous isolated bridge", Earthq. Eng. Eng. Dyn., 34(1), 217-223. http://dx.doi.org/10.13197 /j.eeev.2014.01.217. kangq.029.
  20. Kim, Y.S. and Yun, C.B. (2007), "Seismic response characteristics of bridges using double concave friction pendulum bearings with tri-linear behavior", Eng. Struct., 29, 3082-3093. http://dx.doi.org/10.1016/j.engstruct.2007.02.009.
  21. Matlock, H. (1970), "Correlations for design of laterally loaded piles in soft clay", Proceedings of 2nd Offshore Technology Conference, Houston, USA.
  22. Peng, T.B. and Wu, Y.C. (2017), "RTS test study and numerical simulation of mechanical properties of HDR bearings", Earthq. Struct., 13(3), 299-307. http://dx.doi.org/10.12989/eas.2017.13.3.299.
  23. Saha, A., Saha, P. and Patro, S.K. (2018), "Seismic protection of the benchmark highway bridge with passive hybrid control system", Earthq. Struct., 15(3), 227-241. http://dx.doi.org/10.12989/eas.2018.15.3.227.
  24. Tsai, C.S., Chen, W.S., Chiang, T.C. and Chen, B.J. (2006), "Component and shaking table tests for full-scale multiple friction pendulum system", Earthq. Eng. Struct. Dyn., 35, 1653-1675. http://dx.doi.org/10.1002/eqe.598.
  25. Tsai, C.S., Lin, Y.C. and Su, S.C. (2010), "Characterization and modeling of multiple friction pendulum isolation system with numerous sliding interfaces", Earthq. Eng. Struct. Dyn., 39, 1463-1491. http://dx.doi.org/10.1002/eqe.1044.
  26. Zayas, V.A., Low, S.S. and Mahin, S.A. (1987), "The FPS earthquake resisting system", Rep. No. UCB/ EERC-87/01;Earthquake Engineering Research Center, Univ. of California at Berkeley.

피인용 문헌

  1. Study on the Seismic Performance of Different Combinations of Rubber Bearings for Continuous Beam Bridges vol.2020, 2019, https://doi.org/10.1155/2020/8810874
  2. Effect of various aspects on the seismic performance of a curved bridge with HDR bearings vol.19, pp.6, 2019, https://doi.org/10.12989/eas.2020.19.6.427