Smart Structures and Systems

  • 제24권1호
  • /
  • Pages.83-94
  • /
  • 2019
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Impact of cable sag on the efficiency of an inertial mass damper in controlling stay cable vibrations

  • Wang, Zhi-hao (International Joint Research Lab for Eco-building Materials and Engineering of Henan Province, North China University of Water Resources and Electric Power) ;
  • Gao, Hui (International Joint Research Lab for Eco-building Materials and Engineering of Henan Province, North China University of Water Resources and Electric Power) ;
  • Xu, Yan-wei (International Joint Research Lab for Eco-building Materials and Engineering of Henan Province, North China University of Water Resources and Electric Power) ;
  • Chen, Zheng-qing (Key Laboratory for Wind and Bridge Engineering of Hunan Province, Hunan University) ;
  • Wang, Hao (Key Laboratory of Concrete and Pre-stressed Concrete Structure of Ministry of Education, Southeast University)
  • 투고 : 2018.10.11
  • 심사 : 2019.03.10
  • 발행 : 2019.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Passive negative stiffness dampers (NSDs) that possess superior energy dissipation abilities, have been proved to be more efficient than commonly adopted passive viscous dampers in controlling stay cable vibrations. Recently, inertial mass dampers (IMDs) have attracted extensive attentions since their properties are similar to NSDs. It has been theoretically predicted that superior supplemental damping can be generated for a taut cable with an IMD. This paper aims to theoretically investigate the impact of the cable sag on the efficiency of an IMD in controlling stay cable vibrations, and experimentally validate superior vibration mitigation performance of the IMD. Both the numerical and asymptotic solutions were obtained for an inclined sag cable with an IMD installed close to the cable end. Based on the asymptotic solution, the cable attainable maximum modal damping ratio and the corresponding optimal damping coefficient of the IMD were derived for a given inertial mass. An electromagnetic IMD (EIMD) with adjustable inertial mass was developed to investigate the effects of inertial mass and cable sag on the vibration mitigation performance of two model cables with different sags through series of first modal free vibration tests. The results show that the sag generally reduces the attainable first modal damping ratio of the cable with a passive viscous damper, while tends to increase the cable maximum attainable modal damping ratio provided by the IMD. The cable sag also decreases the optimum damping coefficient of the IMD when the inertial mass is less than its optimal value. The theoretically predicted first modal damping ratio of the cable with an IMD, taking into account the sag generally, agrees well with that identified from experimental results, while it will be significantly overestimated with a taut-cable model, especially for the cable with large sag.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Ahmad, J., Cheng, S.H. and Ghrib, F. (2018), "Combined effect of external damper and cross-tie on the modal response of hybrid two-cable networks", J. Sound Vib., 417, 132-148. https://doi.org/10.1016/j.jsv.2017.12.023.
  2. Cai, C.S., Wu, W.J. and Araujo, M. (2007), "Cable vibration control with a TMD-MR damper system: experimental exploration", J. Struct. Eng.-ASCE, 133(5), 629-637. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:5(629).
  3. Chen, L., Sun, L.M. and Nagarajaiah, S. (2015), "Cable with discrete negative stiffness device and viscous damper: passive realization and general characteristics", Smart Struct. Syst., 15(3), 627-643. http://dx.doi.org/10.12989/sss.2015.15.3.627.
  4. Chen, Z.Q., Wang, X.Y., Ko, J.M., et al. (2004), "MR damping system for mitigating wind-rain induced vibration on Dongting Lake Cable-Stayed Bridge", Wind Struct., 7(5), 293-304. http://dx.doi.org/10.12989/was.2004.7.5.293.
  5. Christenson, R.E., Spencer, B.F. and Johnson, E.A. (2006), "Experimental verification of smart cable damping", J. Eng. Mech.-ASCE, 132(3), 268-278. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:3(268).
  6. Cu, V.H., Han, B., Pham, D.H., et al. (2018), "Free vibration and damping of a taut cable with an attached viscous mass damper", KSCE J. Civ. Eng., 22(5), 1792-1802. https://doi.org/10.1007/s12205-017-1167-8
  7. Duan, Y.F. (2004), "Vibration control of stay cables using semi-active magneto-rheological (MR) dampers", Ph.D. Dissertation, The Hong Kong Polytechnic University, Hong Kong.
  8. Duan, Y.F., Ni, Y.Q. and Ko, J.M. (2006), "Cable vibration control using magneto-rheological (MR) dampers", J. Intel. Mat. Syst. Str., 17(4), 321-325. https://doi.org/10.1142/9789812702197_0121.
  9. Fournier, J.A. and Cheng, S.H. (2014), "Impact of damper dtiffness and damper support stiffness on the efficiency of a linear viscous damper in controlling stay cable vibrations", J. Bridge Eng., 2014, 19(4), 04013022. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000562
  10. Fujino, Y. and Hoang, N. (2008), "Design formulas for damping of a stay cable with a damper", J. Bridge Eng., 134(2), 269-278. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(269).
  11. He, X.H., Cai, C., Wang, Z.J., et al. (2018), "Experimental verification of the effectiveness of elastic cross-ties in suppressing wake-induced vibrations of staggered stay cables", Eng. Struct., 167, 151-165. https://doi.org/10.1016/j.engstruct.2018.04.033.
  12. Huang, H., Sun, L.M. and Jiang, X. (2012), "Vibration mitigation of stay cable using optimally tuned MR damper", Smart Struct. Syst., 9(1), 35-53. https://doi.org/10.12989/sss.2012.9.1.035
  13. Ikago, K., Saito, K. and Inoue, N. (2012), "Seismic control of single-degree-of-freedom structure using tuned viscous mass damper", Earthq. Engng. Struct. D., 41(3), 453-474. https://doi.org/10.1002/eqe.1138.
  14. Irvine, H.M. and Caughey, T.K. (1974), "The linear theory of free vibrations of a suspended cable", Proc. R. Soc. Lond. A, 341, 299-315. https://doi.org/10.1098/rspa.1974.0189.
  15. Johnson, E.A., Christenson, R.E. and Spencer, B.F. (2003), "Semi-active damping of cables with sag", Comput.-Aided. Civ. Inf., 18(2), 132-146. https://doi.org/10.1111/1467-8667.00305.
  16. Jung, H.J., Jang, J.E., Choi, K.M., et al. (2008), "MR fluid damper-based smart damping systems for long steel stay cable under wind load", Smart. Struct. Syst., 4(5), 697-710. https://doi.org/10.12989/sss.2008.4.5.697
  17. Kim, I.H., Jung, H.J. and Koo, J.H. (2010), "Experimental evaluation of a self-powered smart damping system in reducing vibration of a full-scale stay cable", Smart Mater. Struct., 19, 115027(1-10). https://doi.org/10.1088/0964-1726/19/11/115027
  18. Krenk, S. (2000). "Vibrations of a taut cable with an external damper", J. Appl. Mech., 67(4), 772-776. doi:10.1115/1.1322037.
  19. Krenk, S. and Nielsen, S.R.K. (2002), "Vibrations of a shallow cable with a viscous damper", Proc. R. Soc. Lond. A, 458, 339-357. https://doi.org/10.1098/rspa.2001.0879.
  20. Lazar, I.F., Neild, S.A. and Wagg, D.J. (2016), "Vibration suppression of cables using tuned inerter dampers", Eng. Struct., 122, 62-71. https://doi.org/10.1016/j.engstruct.2016.04.017.
  21. Li, H., Liu, M., Li, J.H., et al. (2007), "Vibration control of stay cables of Shandong Binzhou Yellow River Highway Bridge by using magnetorheological fluid dampers", J. Bridge Eng.-ASCE, 12(4), 401-409. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:4(401).
  22. Li, H., Liu, M. and Ou, J.P. (2008), "Negative stiffness characteristics of active and semi-active control systems for stay cables", Struct. Control Health Monit., 15(2), 120-142. https://doi.org/10.1002/stc.200.
  23. Lu, L., Duan, Y.F., Spencer, B.F., et al. (2017), "Inertial mass damper for mitigating cable vibration", Struct. Control Health Monit., 24(10), 1-12. https://doi.org/10.1002/stc.1986.
  24. Luo, J.N., Jiang, J.Z. and Macdonald, J.H.G. (2019), "Cable vibration suppression with inerter-based absorbers", J. Eng. Mech., 145(2), 04018134. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001554.
  25. Nakamura, Y., Fukukita, A., Tamura, K., et al. (2014),"Seismic response control using electro-magnetic inertial mass damper", Earthq. Eng. Struct. D., 43(4), 507-527. https://doi.org/10.1002/eqe.2355.
  26. Pacheco, B. M., Fujino, Y. and Sulekh, A. (1993), "Estimation curve for modal damping in stay cables with viscous damper", J. Struct. Eng., 119(6), 1961-1979. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:6(1961).
  27. Sun, L.M., Hong, D.X. and Chen, L. (2017), "Cables interconnected with tuned inerter damper for vibration mitigation", Eng. Struct., 151, 57-67. https://doi.org/10.1016/j.engstruct.2017.08.009.
  28. Shen, W.A., Zhu, S.Y. and Zhu, H.P. (2016), "Experimental study on using electromagnetic devices on bridge stay cables for simultaneous energy harvesting and vibration damping", Smart Mater. Struct., 25(6), 065011. https://doi.org/10.1088/0964-1726/25/6/065011
  29. Shi, X., Zhu S.Y., Li, J.Y., et al. (2016), "Dynamic behaviour of stay cables with passive negative stiffness dampers", Smart Mater. Struct., 25(7), 075044. https://doi.org/10.1088/0964-1726/25/7/075044
  30. Shi, X., Zhu, S.Y. and Spencer, B.F. (2017), "Experimental study on passive negative stiffness damper for cable vibration mitigation", J. Eng. Mech., 143, 04017070. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001289.
  31. Shi, X. and Zhu S.Y. (2018), "Dynamic characteristics of stay cables with inerter dampers", J. Sound Vib., 423, 287-305. https://doi.org/10.1016/j.jsv.2018.02.042.
  32. Weber, F. and Distl, H. (2015a), "Amplitude and frequency independent cable damping of Sutong Bridge and Russky Bridge by magnetorheological dampers", Struct. Control Health Monit., 22 (2), 237-254. https://doi.org/10.1002/stc.1671.
  33. Weber, F. and Distl, H. (2015b), "Semi-active damping with negative stiffness for multi-mode cable vibration mitigation: approximate collocated control solution", Smart Mater. Struct., 24(11), 115015 (14pp). https://doi.org/10.1088/0964-1726/24/11/115015
  34. Wang, Z.H., Chen, Z.Q., Gao, H., et al. (2018), "Development of a self-powered magnetorheological damper system for cable vibration control", Appl. Sci., 8(1), 1-17. https://doi.org/10.3390/app8010118.
  35. Wang, Z.H., Gao, H., Fan, B.Q., et al. (2018), "Inertial mass damper for vibration control of cable with sag", J. Low. Freq. Noise V. A., 1-12. https://doi.org/10.1177/1461348418814967
  36. Wang, X.Y., Ni, Y.Q., Ko, J.M, et al. (2005), "Optimal design of viscous dampers for multi-mode vibration control of bridge cables", Eng.Struct., 27(5), 792-800. https://doi.org/10.1016/j.engstruct.2004.12.013.
  37. Xu, Y.L. and Yu, Z. (1998), "Vibration of inclined sag cables with oil dampers in cable stayed bridges", J. Bridge Eng., 3(4), 194-203. https://doi.org/10.1061/(ASCE)1084-0702(1998)3:4(194).
  38. Xu, Y.L. and Zhou, H.J. (2007), "Damping cable vibration for a cable-stayed bridge using adjustable fluid dampers", J. Sound Vib., 306(1), 349-360. https://doi.org/10.1016/j.jsv.2007.05.032.
  39. Zhu, H.P., Li, Y.M., Shen, W.A., et al. (2019), "Mechanical and energy-harvesting model for electro-magnetic inertial mass dampers", Mech. Syst. Signal Pr., 120, 203-220. https://doi.org/10.1016/j.ymssp.2018.10.023.
  40. Zhou, P. and Li, H. (2016), "Modeling and control performance of a negative stiffness damper for suppressing stay cable vibrations", Struct. Control Health Monit., 23(4), 764-782. https://doi.org/10.1002/stc.1809.
  41. Zhou, H.J. and Sun, L.M. (2008), "Parameter optimization of damper with stiffness for stay cable", Chinese Quarterly of Mechanics, 29(1), 180-185. (in Chinese)
  42. Zhou, H.J., Sun, L.M. and Xing, F. (2014a), "Damping of full-scale stay cable with viscous damper: experiment and analysis", Adv. Struct. Eng., 17(2), 265-274. https://doi.org/10.1260/1369-4332.17.2.265.
  43. Zhou, H.J., Sun, L.M. and Xing, F. (2014b), "Free vibration of taut cable with a damper and a spring", Struct. Control Health Monit., 2014, 21(6), 996-1014. https://doi.org/10.1002/stc.1628.
  44. Zhou, H.J., Yang, X., Sun, L.M., et al. (2015), "Free vibrations of a two-cable network with near-support dampers and a cross-link", Struct. Control Health Monit., 22(9), 1173-1192. https://doi.org/10.1002/stc.1738.
  45. Zhou, H.J., Qi, S.K., Yao, G.Z., et al. (2018a), "Damping and frequency of a model cable attached with a pre-tensioned shape memory alloy wire: experiment and analysis", Struct. Control Health Monit., 25(2), e2106. https://doi.org/10.1002/stc.2106.
  46. Zhou, H.J., Huang, X.G., Xiang, N., et al. (2018b), "Free vibration of a taut cable with a damper and a concentrated mass", Struct. Control Health Monit., e2251. https://doi.org/10.1002/stc.2251.
  47. Zhou, H.J., Xiang N., Huang, X.G., et al. (2018c), "Full-scale test of dampers for stay cable vibration mitigation and improvement measures", Struct. Monit. Maint. 5(4), 489-506. https://doi.org/10.12989/smm.2018.5.4.489.

피인용 문헌

  1. Single input magnetorheological pseudo negative stiffness control for bridge stay cables vol.30, pp.1, 2021, https://doi.org/10.1088/1361-665x/abcca4