한국추진공학회지 (Journal of the Korean Society of Propulsion Engineers)

  • 제23권4호
  • /
  • Pages.10-20
  • /
  • 2019
  • /
  • 1226-6027(pISSN)
  • /
  • 2288-4548(eISSN)
한국추진공학회 (The Korean Society of Propulsion Engineers)
권호 표지
DOI QR코드

DOI QR Code

충격파 개념에 기반한 유체 추력벡터제어에 관한 연구

Fluidic Thrust Vector Control Using Shock Wave Concept

  • Wu, Kexin (Department of Mechanical Engineering, Andong National University) ;
  • Kim, Heuy Dong (Department of Mechanical Engineering, Andong National University)
  • 투고 : 2018.12.26
  • 심사 : 2019.05.13
  • 발행 : 2019.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

충격파 개념을 이용하는 유체 추력벡터 제어는 빠른 벡터링 응답, 간단한 구조 및 낮은 무게로 인하여 큰 벡터링 성능을 달성하는데 많은 이점을 제공한다. 본 논문에서는 전산유체역학 기법을 사용하여 슬롯 인젝터를 가진 3차원 직사각형 초음속 노즐에 대하여 연구를 수행하였다. 계산 방법론을 검증하기 위하여 수치 결과를 실험 데이터로 비교하였다. 대칭 평면에서의 상부 및 하부 노즐벽을 따르는 압력분포는 시험 결과와 잘 일치하였다. $k-{\omega}$ SST 난류모델을 기반으로 한 수치해석을 통하여, 운동량 플럭스 비율의 영향을 철저히 조사하여 추력의 성능 변화를 명확하게 나타내었다.

Recently, fluidic thrust vector control has become a core technique to control multifarious air vehicles, such as supersonic aircraft and modern rockets. Fluidic thrust vector control using the shock vector concept has many advantages for achieving great vectoring performance, such as fast vectoring response, simple structure, and low weight. In this paper, computational fluid dynamics methods are used to study a three-dimensional rectangular supersonic nozzle with a slot injector. To evaluate the reliability and stability of computational methodology, the numerical results were validated with experimental data. The pressure distributions along the upper and lower nozzle walls in the symmetry plane showed an excellent match with the test results. Several numerical simulations were performed based on the shear stress transport(SST) $k-{\omega}$ turbulence model. The effect of the momentum flux ratio was investigated thoroughly, and the performance variations have been clearly illustrated.

키워드

참고문헌

  1. Herbst, W.B., “Future Fighter Technologies,” Journal of Aircraft, Vol. 17, No. 8, pp. 561-566, 1980. https://doi.org/10.2514/3.44674
  2. Henderson, W.P., "Propulsion System Integration in High Performance Aircraft," Journal of Aerospace Engineering, Vol. 10, pp. 21-25, 1990.
  3. Mason, M.S. and Crowther, W.J., "Fluidic Thrust Vectoring for Low Observable Air Vehicles," 2nd AIAA Flow Control Conference, Portland, O.R., USA, AIAA 2007-5084, Jun. 2004.
  4. Wilde, P.I.A., Crowther, W.J., Buonanno, A. and Savvaris, A., "Aircraft Control Using Fluidic Maneuver Effectors," 26th AIAA Applied Aerodynamics Conference, Honolulu, H.A., USA, AIAA 2008-6406, Aug. 2008.
  5. Zmijanovic, V., Lago, V. and Chpoun, A., “Thrust Shock Vector Control of an Axisymmetric Conical Supersonic Nozzle via Secondary Transverse Gas Injection,” Shock Waves, Vol. 24, No. 1, pp. 92-111, 2014.
  6. Erdem, E. and Kontis, K., “Numerical and Experimental Investigation of Transverse Injection Flows,” Shock Waves, Vol. 20, No. 2, pp. 103-118, 2010. https://doi.org/10.1007/s00193-010-0247-1
  7. Spaid, F.W. and Zukoski, E.E., “Study of the Interaction of Gaseous Jets from Transverse Slots with Supersonic External Flows,” AIAA Journal, Vol. 6, No. 2, pp. 205-212, 1968. https://doi.org/10.2514/3.4479
  8. Mangin, B., Chpoun, A. and Jacquin, L., "Experimental and Numerical Study of the Fluidic Thrust Vectoring of a Two-Dimensional Supersonic Nozzle," 24th AIAA Applied Aerodynamics Conference, Fluid Dynamics and Co-located Conferences, San Francisco, C.A., USA, AIAA 2006-3666, Jun. 2006.
  9. Zou, X.H. and Wang, Q., “The Comparative Analysis of Two Typical Fluidic Thrust Vectoring Exhaust Nozzles on Aerodynamic Characteristics,” International Journal of Aerospace and Mechanical Engineering, Vol. 5, No. 4, pp. 827-833, 2011.
  10. Deng, R.Y., Kong, F.S. and Kim, H.D., “Numerical Simulation of Fluidic Thrust Vectoring in an Axisymmetric Supersonic Nozzle,” Journal of Mechanical Science and Technology, Vol. 28, No. 12, pp. 4979-4987, 2014. https://doi.org/10.1007/s12206-014-1119-x
  11. Deng, R.Y. and Kim, H.D., “A Study on the Thrust Vector Control Using a Bypass Flow Passage,” Proceeding of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 229, No. 9, pp. 1722-1729, 2015. https://doi.org/10.1177/0954410014558693
  12. Waithe, K.A. and Deere, K.A., "Experimental and Computational Investigations of Multiple Injection Ports in a Convergent-Divergent Nozzle for Fluidic Thrust Vectoring," AIAA Applied Aerodynamics Conference, Orlando. F.L., USA, AIAA 2003-3802, Jun. 2003.
  13. Sellam, M., Vladeta, Z., Leger, L. and Chpoun, A., "Assessment of Gas Thermodynamic Characteristics on Fluidic Thrust Vectoring Performance: Analytical, Experimental and Numerical Study," International Journal of Heat and Fluid Flow, Vol. 53, pp. 156-166, 2015. https://doi.org/10.1016/j.ijheatfluidflow.2015.03.005