DOI QR코드

DOI QR Code

2엽 및 3엽 수직축 풍력-태양광 하이브리드 가로등의 발전 중 진동계측을 통한 동적 특성 비교

Comparison of Dynamic Characteristics of a Wind and Photovoltaic Hybrid Light Pole Structure with 2-bladed and 3-bladed Vertical Axis Turbine Rotors Using Vibration Measurement under Normal Operation Conditions

  • 이진학 (한국해양과학기술원 연안개발에너지연구센터) ;
  • 박상민 (한국해양과학기술원 연안개발에너지연구센터) ;
  • 임승률 ((주)애니텍시스)
  • 투고 : 2019.06.14
  • 심사 : 2019.08.20
  • 발행 : 2019.09.01

초록

이 연구에서는 풍력-태양광 하이브리드 가로등 구조물에 대한 동적 응답을 계측하여, 서로 다른 터빈을 적용하였을 때의 진동 특성 및 공진현상을 비교하였다. 2엽 및 3엽 풍력터빈을 적용하였으며, 하이브리드 가로등이 가지고 있는 진동 특성은 가동 중인 조건에서의 동특성과 가진력을 비교하여 분석하였다. 최근 제안된 방법을 통해 가속도 계측자료를 이용하여 변위 응답을 추정하였고, 2엽 풍력터빈을 적용한 경우 동적 변위 응답의 진폭은 공진 하의 조건에서 4~6cm 범위에 있고, 3엽 풍력터빈을 적용한 경우에는 공진이 발생하지 않아 변위는 2mm 이내로 제한됨을 알 수 있었다.

In this study, the vibration characteristics and the resonance phenomena of a wind-solar hybrid light pole structure are compared with respect to the wind turbine type through the dynamic response measurement. Two different turbines are considered including 2-bladed and 3-bladed vertical axis wind turbine rotors. The resonance phenomenon that can occur in hybrid light pole structure is analyzed by comparing the dynamic characteristics of the structure and the excitation force under operational conditions. Displacement responses are also estimated using the acceleration measurement data by use of recently proposed method, and it is observed that the amplitude of dynamic displacement responses are in the range of 4-6 cm under the resonance in the case of 2-bladed turbine and those are limited under 2 mm in the case of 3-bladed turbine because there is no resonance.

키워드

참고문헌

  1. Brinker, R., Zhang, L. and Andersen, P. (2000), Modal identification from ambient response using frequency domain decomposition, Proceedings of 16th International Modal Analysis Conference, San Antonio, Texas, USA, 625-630.
  2. Kim, S., Nam, Y.S., and Eun, S. (2005), Vibration Characteristic of the Tower Structure of a 750 kW Wind Turbine Generator, Transactions of the Korean Society for Noise and Vibration Engineering., 15(2), 219-224. https://doi.org/10.5050/KSNVN.2005.15.2.219
  3. Lee, H. S., Hong, Y. H., and Park H. W. (2010), Design of an FIR Filter for the Displacement Reconstruction using Measured Acceleration in Low-frequency Dominant Structures, International Journal for Numerical Methods in Engineering, 82(4), 403-434. https://doi.org/10.1002/nme.2769
  4. Osgood, R. M. (2001), Dynamic Characterization Tesing of Wind Turbines (No. NREL/TP-500-30070), National Renewable Energy Lab, US.
  5. Park, J. W., Sim, S. H., and Jung, H. J. (2013), Displacement Estimation using Multimetric data fusion, IEEE/ASME Transactions on Mechatronics, 18(6), 1675-1682. https://doi.org/10.1109/TMECH.2013.2275187
  6. Palanisamy, R. P., Jung, B. J., Sim, S. H., and Yi, J. H. (2019), Quasi Real-Time and Continuous Non-Stationary Strain Estimation in Bottom Fixed Offshore Structures by Multimetric Data Fusion, Smart Structures and Systems, 23(1), 61-69. https://doi.org/10.12989/SSS.2019.23.1.061
  7. Yi, J. H., Park, J. S., Han, S. H., and Lee, K. S. (2013), Modal Identification of a Jacket-Type Offshore Structure using Dynamic Tilt Responses and Investigation of Tidal Effects on Modal Properties, Engineering Structures, 49, 767-781. https://doi.org/10.1016/j.engstruct.2012.12.015
  8. Yi, J. H., Kim, W., Han, T. H., and Yim, S. (2017a), Dynamic Response Measurements and Analysis on a 10kW Class Vertical Axis Wind Turbine, Trans, Korean Soc. Noise Vib. Eng., 27(1), 107-113. https://doi.org/10.5050/KSNVE.2017.27.1.107
  9. Yi, J. H., Kim, W., Han, T. H., and Yim, S. (2017b), Dynamic Model Identification and Economic Improvement Analysis on Vertical Win Turbine, Annual Conference of Korea Society of Maintenance and Inspection.
  10. Yi, J. H., Kim, W., Han, T. H., and Yim, S. (2017c), Dynamic Characteristics Analysis and Dynamic Model Modification on a Small Scale Vertical Axis Wind Turbine, Journal of Coastal Disaster Prevention, 4(2), 85-92. https://doi.org/10.20481/kscdp.2017.4.2.85