Journal of the Korean Society for Heat Treatment (열처리공학회지)

The Korean Society for Heat Treatment (한국열처리공학회)
권호 표지
DOI QR코드

DOI QR Code

The Effects of Cyclic Heat Treatment Process for Fine Microstructure of TiAl Cast Alloy

주조용 TiAl 합금의 조직 미세화를 위한 반복열처리 공정 조건에 관한 연구

  • Kong, Man-Sik (Advanced Materials & Processing Center, Institute for Advanced Engineering) ;
  • Yang, Hyunseok (Advanced Materials & Processing Center, Institute for Advanced Engineering)
  • 공만식 (고등기술연구원 신소재공정센터) ;
  • 양현석 (고등기술연구원 신소재공정센터)
  • Received : 2019.08.14
  • Accepted : 2019.09.16
  • Published : 2019.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

For expanding the applications and workability of TiAl alloy, elongation is very important property. Fine microstructure is needed for elongation and physical properties of TiAl alloys. In this study, The effects of cyclic heat treatment process for fine microstructure of Ti-46Al-Nb-W-Cr-Si-C alloy, which was made by VAR (vacuum arc remelting) and VIM(vacuum induction melting) centrifugal casting process, was investigated. Cycle heat treatment process was very effective for recrystallization of this TiAl system, which has microstructure size of $50{\sim}100{\mu}m$ through pre-heat treatment, cyclic heat treatment in ${\alpha}+{\gamma}$ phase region and solution heat treatment respectively. Refined grain size was finally confirmed by photos of optical microscope and scanning electron microscope.

Keywords

References

  1. H. Clemens, F. Appel and A. Bartels : Ti-2003 Science and Technology, Weinheim (2004) 2123-2137.
  2. E. A. Loria : Quo vadis gamma titanium aluminide. Intermetallics 12 (2001) 997-1001. https://doi.org/10.1016/S0966-9795(01)00064-4
  3. Agnieszka Koscielna and Wojciech Szkliniarz : Material characterization 60 (2009) 1158-1162. https://doi.org/10.1016/j.matchar.2009.03.008
  4. J. N. Wang, Jie Yang, Qiangfei Xia and Yong Wang : Materials Science and Engineering, A329-331 (2002) 118-123.
  5. Jie Yang, J. N. Wang, Yong Wang and Qiangfei Xia : Intermetallics, 11 (2003) 971-974. https://doi.org/10.1016/S0966-9795(02)00126-7
  6. X. Wu and D. Hu : Scripta Materialia 52 (2005) 731-734. https://doi.org/10.1016/j.scriptamat.2004.12.021
  7. Y-W. Kim and S-L. Kim : JOM, 70, 4, 2018.
  8. D. Hu, X. Wu and M. H. Loretto: Intermetallics 13 (2005) 914-919. https://doi.org/10.1016/j.intermet.2004.12.002
  9. G. E. Fuchs : Materials Science and Engineering A1921193 (1995) 707-715. https://doi.org/10.1016/0921-5093(94)03291-2
  10. Yuyong Chena, Yanfei Chen, Fantao Kong and Shulong Xiao : Materials Science Forum, 638-642, 1281-1287. https://doi.org/10.4028/www.scientific.net/MSF.638-642.1281
  11. Jan JURICA and Monika LOSERTOVA : Metal-2012, Brno, Czech Republic, EU, 5, 23-25.
  12. L. M. Hsiung : Powder Metallurgy TiAl Alloys, December 12, 2006.
  13. Xinhua Wu : Intermetallics, 14 (2006) 1114-1122. https://doi.org/10.1016/j.intermet.2005.10.019
  14. Juraj Lapin : TiAl-Based Alloys, 5 (2009) 19-21.
  15. S. Spitans, H. Franz, E. Baake, A. Jakovics : Magnetohydrodynamics, 53(4) (2017) 633-641. https://doi.org/10.22364/mhd.53.4.5
  16. Jiancheng Tang, Baiyun Huang, Kechao Zhou, Wensheng Liu, Yuehui He, Yong Liu : Materials Research Bulletin, 36 (2001) 1737-1742. https://doi.org/10.1016/S0025-5408(01)00650-X