DOI QR코드

DOI QR Code

Synthesis and Properties of Bio-Thermoplastic Polyurethanes with Different Isocyanate Contents

  • Li, Xiang Xu (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education) ;
  • Sohn, Mi Hyun (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education) ;
  • Cho, Ur Ryong (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education)
  • 투고 : 2019.07.12
  • 심사 : 2019.07.31
  • 발행 : 2019.09.30

초록

Bio-based polyester polyol was synthesized via esterification between azelaic acid and isosorbide. After esterification, bio-based polyurethanes were synthesized using polyester polyol, 1,3-propanediol as the chain extender, and 4,4'-diphenylmethane diisocyanate, in mixing ratios of 1:1:1.5, 1:1:1.8, 1:1:2, and 1:1:2.3. The bio TPU (Thermoplastic Polyurethane) samples were characterized by using FT-IR (Fourier Transform Infrared Spectroscopy), TGA (Thermal Gravimetric Analysis), DSC (Differential Scanning Calorimetry), and GPC (Gel Permeation Chromatography). The mechanical properties (tensile stress and hardness) were obtained by using UTM, a Shore A tester, and a Taber abrasion tester. The viscoelastic properties were tested by an Rubber Processing Analyzer in dynamic strain sweep and dynamic frequency test modes. The chemical resistance was tested with methanol by using the swelling test method. Based on these results, the bio TPU synthesized with the ratio of 1:1:2.3, referred to as TPU 4, showed the highest thermal decomposition temperature, the largest molecular weight, and most compact matrix structure due to the highest ratio of the hard segment in the molecular structure. It also presented the highest tensile strength, the largest elongation, and the best viscoelastic properties among the different bio TPUs synthesized herein.

키워드

참고문헌

  1. C. K. Williams and A. H. Marc, "Polymers from renewable resources: a perspective for a special issue of polymer reviews", Polym. Rev., 48, 1 (2008). https://doi.org/10.1080/15583720701834133
  2. A. M. Omer, "Energy, environment and sustainable development", Renew. Sust. Energ. Rev., 12, 2265 (2008). https://doi.org/10.1016/j.rser.2007.05.001
  3. L. Hojabri, X. Kong, and S. S. Narine, "Fatty acid-derived diisocyanate and biobased polyurethane produced from vegetable oil: synthesis, polymerization, and characterization", Biomacromolecules, 10, 884 (2009). https://doi.org/10.1021/bm801411w
  4. J. Y. Lee, J. An, and C. K. Chua, "Fundamentals and applications of 3D printing for novel materials" Appl. Mater. Today, 7, 120 (2017). https://doi.org/10.1016/j.apmt.2017.02.004
  5. J. Datta and P. Kasprzyk, "Thermoplastic polyurethanes derived from petrochemical or renewable resources: A comprehensive review", Polym. Eng. Sci., 58, 14 (2018). https://doi.org/10.1002/pen.24633
  6. D. P. Pfister, Y. Xia, and R. C. Larock, "Recent advances in vegetable oil-based polyurethanes", ChemSusChem, 4, 703 (2011). https://doi.org/10.1002/cssc.201000378
  7. Y. C. Lai, E. T. Quinn, and P. L. Valint Jr.,"Characterization and mechanical properties of prepolymer and polyurethane block copolymer with a shape memory effect", J. Polym. Sci. Pol. Chem., 33, 1767 (1995). https://doi.org/10.1002/pola.1995.080331103
  8. Q. M. Zhang, J. Su, C. H. Kim, R. Ting, and R. Capps, "An experimental investigation of electromechanical responses in a polyurethane elastomer", J. Appl. Phys., 81, 2770 (1997). https://doi.org/10.1063/1.363981
  9. K. H. Jin and U. R. Cho, "A Study on Structure Aanalysis and Synthesis of Polyester Polyol & Polyurethane", Elastomers and Composites, 49, 31 (2014). https://doi.org/10.7473/EC.2014.49.1.31
  10. K. H. Jin, M. S. Kim, and U. R. Cho, "A Study on Polyurethane Adhesive Based Polyester Polyol Polymerized from Sebacic Acid", Elastomers and Composites, 48, 190 (2013). https://doi.org/10.7473/EC.2013.48.3.190
  11. R. Mazzeo, S. Prati, M. Quaranta, E. Joseph, E. Kendix, and M. Galeotti, "Attenuated total reflection micro FTIR characterisation of pigment-binder interaction in reconstructed paint films", Anal. Bioanal. Chem., 392, 65 (2008). https://doi.org/10.1007/s00216-008-2126-5
  12. S. Sahoo, M. Misra, and A. K. Mohanty, "Enhanced properties of lignin-based biodegradable polymer composites using injection moulding process", Compos. Part A-Appl. S., 42, 1710 (2011). https://doi.org/10.1016/j.compositesa.2011.07.025
  13. N. G. Sahoo, Y. C. Jung, H. J. Yoo, and J. W. Cho, "Effect of functionalized carbon nanotubes on molecular interaction and properties of polyurethane composites", Macromol. Chem. Phys., 207, 1773 (2006). https://doi.org/10.1002/macp.200600266
  14. B. K. Kim and Y. M. Lee, "Structure-property relationship of polyurethane ionomer", Colloid. Polym. Sci., 270, 956 (1992). https://doi.org/10.1007/BF00655964
  15. Y. S. Lai, C. W. Tsai, H. W. Yang, G. P. Wang, and K. H. Wu, "Structural and electrochemical properties of polyurethanes/polyhedral oligomeric silsesquioxanes (PU/POSS) hybrid coatings on aluminum alloys", Mater. Chem. Phys., 117, 91 (2009). https://doi.org/10.1016/j.matchemphys.2009.05.006
  16. F. Frizten and T. Bohlke, "Reduced basis homogenization of viscoelastic composites", Compos. Sci. Technol., 76, 84 (2013). https://doi.org/10.1016/j.compscitech.2012.12.012
  17. C. Zhang, Z. Tang, B. Guo, and L. Zhang, "Significantly improved rubber-silica interface via subtly controlling surface chemistry of silica", Compos. Sci. Technol., 156, 70 (2018). https://doi.org/10.1016/j.compscitech.2017.12.020
  18. E. P. Ciannelis, "Polymer-layered silicate nanocomposites: Synthesis, properties and applications", Appl. Organomet. Chem., 12, 675 (1998). https://doi.org/10.1002/(SICI)1099-0739(199810/11)12:10/11<675::AID-AOC779>3.0.CO;2-V
  19. F. Pourjavaheri, O. A. Jones, M. Czajka, I. Martinez-Pardo, E. W. Blanch, and R. A. Shanks, "Design and characterization of sustainable bio-composites from waste chicken feather keratin and thermoplastic polyurethane", Polym. Composite., 39, 620 (2018). https://doi.org/10.1002/pc.24794
  20. S. Y. Choi and U. R. Cho, "Study on synthesis and properties of water-born polyurethane", Elastomers and Composites, 40, 249 (2005).
  21. Z. Kelman and M. O'Donnell, "DNA polymerase III holoenzyme: structure and function of a chromosomal replicating machine", Annu. Rev. Chem., 64, 171 (1995).
  22. M. J. Aman, H. Karauzum, M. G. Bowden, and T. L. Nguyen, "Structural model of the pre-pore ring-like structure of Panton-Valentine leukocidin: providing dimensionality to biophysical and mutational data", Journal of molecular Structure & Dynamics, 28, 1 (2010). https://doi.org/10.1080/073911010010524952