DOI QR코드

DOI QR Code

Post-fire test of precast steel reinforced concrete stub columns under eccentric compression

  • Yang, Yong (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Xue, Yicong (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Yu, Yunlong (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Gong, Zhichao (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2019.03.09
  • 심사 : 2019.09.27
  • 발행 : 2019.10.10

초록

This paper presents an experimental work on the post-fire behavior of two kinds of innovative composite stub columns under eccentric compression. The partially precast steel reinforced concrete (PPSRC) column is composed of a precast outer-part cast using steel fiber reinforced reactive powder concrete (RPC) and a cast-in-place inner-part cast using conventional concrete. Based on the PPSRC column, the hollow precast steel reinforced concrete (HPSRC) column has a hollow column core. With the aim to investigate the post-fire performance of these composite columns, six stub column specimens, including three HPSRC stub columns and three PPSRC stub columns, were exposed to the ISO834 standard fire. Then, the cooling specimens and a control specimen unexposed to fire were eccentrically loaded to explore the residual capacity. The test parameters include the section shape, concrete strength of inner-part, eccentricity ratio and heating time. The test results indicated that the precast RPC shell could effectively confine the steel shape and longitudinal reinforcements after fire, and the PPSRC stub columns experienced lower core temperature in fire and exhibited higher post-fire residual strength as compared with the HPSRC stub columns due to the insulating effect of core concrete. The residual capacity increased with the increasing of inner concrete strength and with the decreasing of heating time and load eccentricity. Based on the test results, a FEA model was established to simulate the temperature field of test specimens, and the predicted results agreed well with the test results.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Xi'an University of Architecture and Technology, China Scholarship Council (CSC)

참고문헌

  1. ABAQUS (2016), ABAQUS 2016 Documentation, Dassault Systemes, Providence, RI, USA.
  2. Abdulraheem, M.S. and Kadhum, M.M. (2018), "Experimental and numerical study on post-fire behaviour of concentrically loaded reinforced reactive powder concrete columns", Constr. Build. Mater., 168, 877-892. https://doi.org/10.1016/j.conbuildmat.2018.02.123
  3. BS EN 1994-1-2 (2005), Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design, Brussels, Belgium.
  4. Chen, Z., Liu, X. and Zhou, W. (2018), "Residual bond behavior of high strength concrete-filled square steel tube after elevated temperatures", Steel Compos. Struct., Int. J., 27(4), 509-523. http://dx.doi.org/10.12989/scs.2018.27.4.509
  5. Chu, L., Li, D., Ma, X. and Zhao, J. (2018), "Cyclic behaviour of concrete encased steel (CES) column-steel beam joints with concrete slabs", Steel Compos. Struct., Int. J., 29(6), 735-748. http://dx.doi.org/10.12989/scs.2018.29.6.735
  6. Espinos, A., Romero, M.L., Portoles, J.M. and Hospitaler, A. (2014), "Ambient and fire behavior of eccentrically loaded elliptical slender concrete-filled tubular columns", J. Constr. SteelRes., 100, 97-107. https://doi.org/10.1016/j.jcsr.2014.04.025
  7. Hajjar, J.F. (2002), "Composite steel and concrete structural systems for seismic engineering", J. Constr. Steel Res., 58(5), 703-723. https://doi.org/10.1016/S0143-974X(01)00093-1
  8. Han, C.G., Hwang, Y.S., Yang, S.H. and Gowripalan, N. (2005), "Performance of spalling resistance of high performance concrete with polypropylene fiber contents and lateral confinement", Cement Concrete Res., 35(9), 1747-1753. https://doi.org/10.1016/j.cemconres.2004.11.013
  9. Han, L.H., Tan, Q.H. and Song, T.Y. (2015), "Fire performance of steel reinforced concrete columns", J. Struct. Eng., 141(4), 04014128. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001081
  10. Han, L.H., Zhou, K., Tan, Q.H. and Song, T.Y. (2016), "Performance of steel-reinforced concrete column after exposure to fire: FEA model and experiments", J. Struct. Eng., 142(9), 04016055. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001511
  11. ISO-834 (1975), Fire-resistance tests-Elements of building construction, Geneva, Switzerland.
  12. Kim, S., Hong, W.K., Kim, J.H. and Kim, J.T. (2013), "The development of modularized construction of enhanced precast composite structural systems (Smart Green frame) and its embedded energy efficiency", Energy Build., 66(5), 16-21. https://doi.org/10.1016/j.enbuild.2013.07.023
  13. Kurama, Y.C., Sritharan, S., Fleischman, R.B., Restrepo, J.I., Henry, R.S., Cleland, N.M., Ghosh, S.K. and Bonelli, P. (2018), "Seismic-Resistant Precast Concrete Structures: State of the Art", J. Struct. Eng., 144(4), 03118001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001972
  14. Leong, S.H., Sulong, N.H.R. and Jameel, M. (2016), "Bolted connections to tubular columns at ambient and elevated temperatures - a review", Steel Compos. Struct., Int. J., 21(2), 303-321. http://dx.doi.org/10.12989/scs.2016.21.2.303
  15. Park, R. (1988), "State of the art report ductility evaluation from laboratory and analytical testing", Proceedings of 9th World Conference on Earthquake Engineering, Tokyo, Japan, August.
  16. Tang, C.W. (2017), "Fire resistance of high strength fiber reinforced concrete filled box columns", Steel Compos. Struct., Int. J., 23(5), 611-621. http://dx.doi.org/10.12989/scs.2017.23.5.611
  17. Tang, C.W. (2018), "Fire resistance of high strength concrete filled steel tubular columns under combined temperature and loading", Steel Compos. Struct., Int. J., 27(2), 243-253. http://dx.doi.org/10.12989/scs.2018.27.2.243
  18. Ukanwa, K.U., Sharma, U., Hicks, S.J., Abu, A., Lim, J.B.P. and Clifton, C.G. (2017), "Behaviour of continuous concrete filled steel tubular columns loaded concentrically in fire", J. Constr. Steel Res., 136, 101-109. https://doi.org/10.1016/j.jcsr.2017.05.011
  19. Won, D.H., Han, T.H., Kim, S. and Kang, Y.J. (2016), "Fire resistance of double-skinned composite tubular columns including concrete confinement", Mater. Struct., 49(4), 1269-1284. https://doi.org/10.1617/s11527-015-0575-9
  20. Yang, Y., Yu, Y., Guo, Y., Roeder, C.W., Xue, Y. and Shao, Y. (2016), "Experimental study on shear performance of partially precast Castellated Steel Reinforced Concrete (CPSRC) beams", Steel Compos. Struct., Int. J., 21(2), 289-302. http://dx.doi.org/10.12989/scs.2016.21.2.289
  21. Yang, Y., Xue, Y., Yu, Y. and Gao, F. (2018), "Experimental study on seismic performance of partially precast steel reinforced concrete columns", Eng. Struct., 175, 63-75. https://doi.org/10.1016/j.engstruct.2018.08.027
  22. Ye, Z., Jiang, S., Heidarpour, A., Li, Y. and Li, G. (2019), "Experimental study on cyclically-damaged steel-concrete composite joints subjected to fire", Steel Compos. Struct., Int. J., 30(4), 351-364. http://dx.doi.org/10.12989/scs.2019.30.4.351
  23. Zaharia, R. and Dubina, D. (2014), "Fire design of concrete encased columns: validation of an advanced calculation model", Steel Compos. Struct., Int. J., 17(6), 835-850. http://dx.doi.org/10.12989/scs.2014.17.6.835
  24. Zheng, W., Wang, R. and Wang, Y. (2014), "Experimental study on thermal parameter of reactive powder concrete", J. Build. Struct., 35(9), 107-114. [In Chinese] http://dx.doi.org/10.14006/j.jzjgxb.2014.09.014
  25. Zhou, K. and Han, L.H. (2018), "Experimental performance of concrete-encased CFST columns subjected to full-range fire including heating and cooling", Eng. Struct., 165, 331-348. https://doi.org/10.1016/j.engstruct.2018.03.042

피인용 문헌

  1. Shear behavior and shear capacity prediction of precast concrete-encased steel beams vol.36, pp.3, 2020, https://doi.org/10.12989/scs.2020.36.3.261