Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

An Evaluation of Pneumatic Conveyor Equipment Stability Through Fluid Structure Interface Analysis

FSI 해석을 통한 공기압 컨베이어 장치의 안전성 평가

  • Received : 2019.06.07
  • Accepted : 2019.07.03
  • Published : 2019.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

To evaluate the stability of a pneumatic conveyor system, a flow analysis and structural analysis were performed using the FSI technique. Prototypes were fabricated and verified. As a result of the flow analysis, the maximum pressure applied to the device was calculated to be 0.55 MPa. The structural analysis determined that the maximum stress was 131 MPa and the yield strength of the structure was less than 205 MPa. The safety of the system was confirmed by the fact that no deformation occurred during the manufacturing and operation of the prototype.

Keywords

References

  1. Raksha, S., Bohomaz, V., Shcheka, I., Stefanov, V. and Nesterenko, A., "Research of the dependence of pneumatic conveyor compressors power on project parameters of transport machines", MATEC Web of Conferences, Vol. 230, No. 7, pp. 1-2, 2018. 230, No. 7, pp. 1-2, 2018.
  2. Fraige, F. Y. and Langston, P. A., "Horizontal pneumatic conveying: a 3d distinct element model", Granular Matter, pp. 67-80, 2006.
  3. Antoci, C., Gallati, M. and Sibilla, S., "Numerical simulation of fluid-structure interaction by SPH", Computers & Structures, Vol. 85, No. 11-14, pp. 879-890, 2007. https://doi.org/10.1016/j.compstruc.2007.01.002
  4. Hou, G., Wang, J. and Layton, A., "Numerical Methods for Fluid-Structure Interaction - A Review", Communications in Computational Physics, Vol. 12, No. 2, pp. 337-377, 2012. https://doi.org/10.4208/cicp.291210.290411s
  5. Lee, H. S., Na, Y. M., Jang, H. S., Suk, I. H., Kang, S. H., Kim, H. T. and Park, J. K., "A Study on the Stability of Shield TBM Thrust Jack in the Behavior of Operating Fluid According to Thrust Force", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 1, pp.31-37, 2019. https://doi.org/10.14775/ksmpe.2019.18.1.031
  6. Moaveni, S., "Finite Element Analysis", Cheongmungag, pp. 661-700, 2017.
  7. Kim, J. Y., "(ANSYS) Fluent Follow : Advanced", Taeseong SNE, pp. 1-36, 2012.
  8. Kim, N. S., "Plastic Working & Analysis", Munundang, pp. 25-29, 2002.