DOI QR코드

DOI QR Code

Vibro-acoustic modelling of immersed cylindrical shells with variable thickness

  • Wang, Xianzhong (Key Laboratory of High Performance Ship Technology (Wuhan University of Technology), Ministry of Education) ;
  • Lin, Hongzhou (School of Transportation, Wuhan University of Technology) ;
  • Zhu, Yue (School of Transportation, Wuhan University of Technology) ;
  • Wu, Weiguo (Key Laboratory of High Performance Ship Technology (Wuhan University of Technology), Ministry of Education)
  • Received : 2019.07.09
  • Accepted : 2019.12.19
  • Published : 2020.12.31

Abstract

Based on the Precise Transfer Matrix Method (PTMM), the dynamic model is constructed to observe the vibration behaviour of cylindrical shells with variable thickness by solving a set of first-order differential equations. The free vibration of stiffened cylindrical shells with variable thickness can be obtained to compare with the exact solution and FEM results. The reliability of the present method of free vibration is well proved. Furthermore, the effect of thickness on the vibration responses of the cylindrical shell is also discussed. The acoustic response of immersed cylindrical shells is analyzed by a Pluralized Wave Superposition Method (PWSM). The sound pressure coefficient can be gained by collocating points along the meridian line to satisfy the Neumann boundary condition. The mode convergence analysis of the cylindrical shell is carried out to guarantee calculation precision. Also, the reliability of the present method on sound radiation is verified by comparing with experimental results and numerical results.

Keywords

Acknowledgement

The authors would like to thank the anonymous reviewers for their valuable comments. This paper was financially supported by China Scholarship Council (201806955052), National Natural Science Foundation of China (51779201, 51609190) and Natural Science Foundation of Hubei Province (2018CFB607).

References

  1. Caresta, M., Kessissoglou, N.J., 2009. Structural and acoustic responses of a fluidloaded cylindrical hull with structural discontinuities. Appl. Acoust. 70 (7), 954-963. https://doi.org/10.1016/j.apacoust.2008.11.004
  2. El-Kaabazi, N., Kennedy, D., 2012. Calculation of natural frequencies and vibration modes of variable thickness cylindrical shells using the WittrickeWilliams algorithm. Comput. Struct. 104, 4-12. https://doi.org/10.1016/j.compstruc.2012.03.011
  3. Jin, G., Ma, X., Liu, Z., Xuan, L., 2017. Dynamic analysis of general rotationally symmetric built-up structures using a modified fourier spectral element approach. J. Vib. Acoust. 139 (2), 021012. https://doi.org/10.1115/1.4035226
  4. Laulagnet, B., Guyader, J., 1989. Modal analysis of a shell's acoustic radiation in light and heavy fluids. J. Sound Vib. 131 (3), 397-415. https://doi.org/10.1016/0022-460X(89)91001-8
  5. Liu, C.-H., Chen, P.-T., 2009. Numerical analysis of immersed finite cylindrical shells using a coupled BEM/FEM and spatial spectrum approach. Appl. Acoust. 70 (2), 256-266. https://doi.org/10.1016/j.apacoust.2007.01.009
  6. Petyt, M., Lim, S., 1978. Finite element analysis of the noise inside a mechanically excited cylinder. Int. J. Numer. Methods Eng. 13 (1), 109-122. https://doi.org/10.1002/nme.1620130108
  7. Sandman, B., 1976. Fluid-loading influence coefficients for a finite cylindrical shell. J. Acoust. Soc. Am. 60 (6), 1256-1264. https://doi.org/10.1121/1.381238
  8. Stepanishen, P.R., 1982. Modal coupling in the vibration of fluid-loaded cylindrical shells. J. Acoust. Soc. Am. 71 (4), 813-823. https://doi.org/10.1121/1.387607
  9. Tang, D., Yao, X., Wu, G., Peng, Y., 2017. Free and forced vibration analysis of multistepped circular cylindrical shells with arbitrary boundary conditions by the method of reverberation-ray matrix. Thin-Walled Struct. 116, 154-168. https://doi.org/10.1016/j.tws.2017.03.023
  10. Tottenham, H., Shimizu, K., 1972. Analysis of the free vibration of cantilever cylindrical thin elastic shells by the matrix progression method. Int. J. Mech. Sci. 14 (5), 293-310. https://doi.org/10.1016/0020-7403(72)90085-9
  11. Ventsel, E., Naumenko, V., Strelnikova, E., Yeseleva, E., 2010. Free vibrations of shells of revolution filled with a fluid. Eng. Anal. Bound. Elem. 34 (10), 856-862. https://doi.org/10.1016/j.enganabound.2010.05.004
  12. Wang, X., Wu, W., Yao, X., 2015. Structural and acoustic response of a finite stiffened conical shell. Acta Mech. Solida Sin. 28 (2), 200-209. https://doi.org/10.1016/S0894-9166(15)30008-2
  13. Wang, X., Guo, W., 2016a. Dynamic modeling and vibration characteristics analysis of submerged stiffened combined shells. Ocean Eng. 127, 226-235. https://doi.org/10.1016/j.oceaneng.2016.10.008
  14. Wang, X.-z., Jiang, C.-b., Xu, R.-y., 2016b. Structural and acoustic response of a finite stiffened submarine hull. China Ocean Eng. 30 (6), 898-915. https://doi.org/10.1007/s13344-016-0058-y
  15. Zhang, X., 2002. Frequency analysis of submerged cylindrical shells with the wave propagation approach. Int. J. Mech. Sci. 44 (7), 1259-1273. https://doi.org/10.1016/S0020-7403(02)00059-0