DOI QR코드

DOI QR Code

Design and Hardware Verification of Power Conversion System for GaN-HEMT Based Anyplace Induction Cooktop

GaN-HEMT 기반 Anyplace Induction Cooktop용 전력변환장치 설계 및 성능 검증

  • Kwon, Man-Jae (Dept. of Electrical Eng., Sungkyunkwan University) ;
  • Jang, Eun-Su (Dept. of Electrical Eng., Sungkyunkwan University) ;
  • Park, Sang-Min (Dept. of Electrical Eng., Sungkyunkwan University) ;
  • Lee, Byoung-Kuk (Dept. of Electrical Eng., Sungkyunkwan University)
  • Received : 2020.03.02
  • Accepted : 2020.05.31
  • Published : 2020.12.20

Abstract

In this study, a trade-off analysis of a power conversion system (PCS) is performed in accordance with a power semiconductor device to establish the suitable operating frequency range for the anyplace induction heating system. A resonant network is designed under each operating frequency condition to compare and analyze the PCS losses depending on the power semiconductor device. On the basis of the simulation results, the PCS losses and frequency condition are calculated. The calculated results are then used for a trade-off analysis between Si-MOSFET and GaN-HEMT based on PCS. The suitable operating frequency range is determined, and the validity of the analysis results is verified by the experiment results.

Keywords

Acknowledgement

본 연구는 2018년도 산업통상자원부의 재원으로 한국에너지기술평가원(KETEP)의 에너지인력양성사업으로 지원받아 수행한 인력양성 성과입니다. (No. 20184030202190) 본 연구는 산업통상자원부(MOTIE)와 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 연구과제입니다. (No. 2018201010650A)

References

  1. O. Lucia, P. Maussion, E. J. Dede, and J. M. Burdio, "Induction heating technology and its applications: past developments, current technology, and future challenges," IEEE Trans. Industrial Electronics, Vol. 61, No. 5, pp. 2509-2520, May 2014. https://doi.org/10.1109/TIE.2013.2281162
  2. T. Hirokawa, E. Hiraki, T. Tanaka, M. Imai, K. Yasui, and S. Sumiyoshi, "Dual-frequency multiple-output resonant soft switching inverter for induction heating cooking appliances," in IEEE. IECON 2013, Vienna, Austria, Nov. 2013.
  3. J. Serrano, J. Acero, I. Lope, C. Carretero, and J. M. Burdio, "A flexible cooking zone composed of partially overlapped inductors," IEEE Trans. Industrial Electronics, Vol. 65, No. 10, pp. 7762-7771, Oct. 2018. https://doi.org/10.1109/TIE.2018.2801815
  4. E. A. Jones, F. F. Wang, and D. Costinett, "Review of commercial GaN power devices and GaN-based converter design challenges," IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 4, No. 3, pp. 707-719, Sep. 2016. https://doi.org/10.1109/JESTPE.2016.2582685
  5. J. Lu et al., "Applying variable-switching-frequency variable-phase-shift control and E-mode GaN HEMTs to an indirect matrix converter-based EV battery charger," IEEE Trans. Transportation Electrification, Vol. 3, No. 3, pp. 554-564, Sep. 2017. https://doi.org/10.1109/TTE.2017.2723944
  6. J. L. Lu and D. Chen, "Paralleling GaN E-HEMTs in 10kW-100kW systems," in 2017 IEEE Appl.Power Electron. Conf. Exp. (APEC), Tampa, FL, pp. 3049-3056, 2017.
  7. J. W. Milligan, S. Sheppard, W. Pribble, Y. F. Wu, G. Muller, and J. W. Palmour, "SiC and GaN wide bandgap device technology overview," in 2007 IEEE Radar Conference, Boston, MA, pp. 960-964, 2007.
  8. A. Lidow and J. Strydom, "Gallium nitride (GaN) technology overview," in White paper of EPC (WP001), Dec. 2012.
  9. G. Farkas, Z. Sarkany, and M. Rencz, "Issues in testing advanced power semiconductor devices," IEEE. SEMI-THERM 2016, San Jose, CA, USA, Mar. 2016.
  10. E. S. Jang, S. M. Park, D. M. Joo, H. M. Ahn, and B. K. Lee, "Feasibility study on all metal induction cooker systems considering topology and control," in IEEE ECCE 2018, Portland, OR, USA, Sep. 2018.
  11. J. W. Jeong, H. B. Kim, J. S. Kim, and N. J. Kim, "A study on the efficiency prediction of low-voltage and high current DC-DC converters using GaN FET-based synchronous rectifier," The Transactions of the Korean Institute of Power Electronics, Vol. 14, No. 4, pp. 299-303, Aug. 2017.
  12. B. Sun, "Third quadrant operation of GaN," TI Application Note, 2019.
  13. H. Sarnago, O. Lucia, A. Mediano, and J. M. Burdio, "Multi-MOSFET-based series resonant inverter for improved efficiency and power density induction heating applications," in IEEE Trans. Power Electronics, Vol. 29, No. 8, pp. 4301-4312, Aug. 2014. https://doi.org/10.1109/TPEL.2013.2288802
  14. H. S. Roh, K. A. Kwon, and W. J. Yang, "The analysis of inverter circuit with induction heating load," The Korean Institute of Electrical Engineers, pp. 424-427, Jul. 1995.
  15. S. R. Ghuge and M. R. Roda, "Summary of overall toplogies of an induction cooker for home use (298)," ICESA 2015, pp. 655-657, Oct. 2015.
  16. Y. S. Kwon, S. B. Yoo, and D. S. Hyun "A study on the improvement of performance and stability of induction heating system," The Korean Institute of Electrical Engineers, Vol. 48, No. 8, pp. 417-425, Aug. 1999.
  17. G. Antonini, "SPICE equivalent circuits of frequency-domain responses," IEEE Trans. Electromagn. Compat., Vol. 45, No. 3, pp. 502-512, Aug. 2003. https://doi.org/10.1109/TEMC.2003.815528
  18. Z. Guo, X. Ren, Q. Chen, Z. Zhang, and X. Ruan, "Investigation of the MHz switching frequency PFC converter based on high-voltage GaN HEMT," IEEE. IFEEC 2015, Taipei, pp. 1-6, 2015.
  19. International Electrotechnical Commission Standard, IEC 60335-2-9, 2012