DOI QR코드

DOI QR Code

Characterization on the Thermal Oxidation of Raw Natural Rubber Thin Film using Image and FT-IR Analysis

  • Received : 2020.02.05
  • Accepted : 2020.02.17
  • Published : 2020.03.31

Abstract

In this study, the thermal oxidation of raw natural rubber (NR) was investigated under controlled conditions by optical image and fourier transform infrared (FT-IR) analysis. The thermal oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at 80℃ under low humidity conditions to completely exclude moisture and restrict light oxidation. Images of the thin film of raw NR were obtained before and after thermal oxidation. FT-IR absorption spectra were measured in the transmission mode at different thermal exposure times. The thermal oxidation of NR was examined by the changes in the absorption peaks at 3449, 1736, 1447, 1377, 1242, 1072, and 833 cm-1, which corresponded to a hydroxyl group (-OH), a carbonyl group (-C=O) from an aldehyde and a ketone, a methylene group (-CH2-), a methyl group (-CH3), a carbon-oxygen single bond (-C-O) from an epoxide, a carbon-oxygen bond (-C-O) from an ether, an alcohol, a peroxide, or a cyclic peroxide, and a cis-methine group (cis-CCH3=CH-), respectively. In the initial stage of thermal oxidation, two different types of free radicals were produced quickly and randomly by the homolytic cleavage of a double bond and allylic hydrogen abstraction. Aldehydes and ketones were formed from chain scissions of the double bonds and alcohols were produced from allylic hydrogen abstraction at the methylene or methyl groups. Two reactions seemed to proceed competitively with each other. At a later stage, oxidative crosslinks seemed to dominate through the combination of free radicals such as an allyl radical (CH=CHCH2·), alkoxy radical (RO·), and peroxy radical (ROO·) and the reaction of a hydroperoxide (-ROOH) with a double bond. The image obtained after thermal oxidation showed hardening without cracks. Based on these observations, a plausible two-step mechanism was suggested for chain hardening caused by the thermal oxidation.

Keywords

References

  1. G. Y. Li and J. L. Koenig, "A Review of Rubber Oxidation", Rubber Chem. Technol., 78, 2 (2005).
  2. G. Van Santvoort, "Geotextiles and Geomembranes in Civil Engineering", p. 517-518, Roterdam, Netherlands: A.A. Balkema, 1994.
  3. J. S. Dick, "Rubber Technology: Compounding and Testing for Performance", ed. by J. S. Dick, p. 64, Munich: Hanser; Cincinnati: Hanser Gardner, 2001.
  4. E. Manila, M. D. Stelescu, and G. Cracium, "Degradation Studies Realized on Natural Rubber and Plasticized Potato Starch Based Eco-composites Obtained by Peroxide Crosslinking", Int. J. Mol. Sci., 19, 2862 (2018). https://doi.org/10.3390/ijms19102862
  5. K. Muniandy, H. Ismail, and N. Othman, "Studies on Natural Weathering of Rattan Powder-filled Natural Rubber Composites", Bioresources, 7, 3 (2012).
  6. S.-D. Li, Z. Peng, L. X. Kong, and J.-P Zhong, "Thermal Degradation Kinetics and Morphology of Natural Rubber/Silica Nanocomposites", J. Nanosci. Nanotechnol., 6, 2 (2006).
  7. E. Schoenberg, H. A. Marsh, S. J. Walters, and W. M. Saltman, "Polyisoprene", Rubber Chem. Technol., 52, 3 (1979).
  8. J. L. Bolland and G. Gee, "Kinetic Studies in the Chemistry of Rubber and Related Materials. III. Thermo-chemistry and Mechanism of Olefin Oxidation", Rubber Chem. Technol., 20, 3 (1947).
  9. R. W. Keller, "Oxidation and Ozonation of Rubber", Rubber Chem. Technol., 58, 3 (1985). https://doi.org/10.5254/1.3536082
  10. J. Tangpakdee and Y. Tanaka, "Characterization of Sol and Gel in Hevea Natural Rrubber", Rubber Chem. Technol., 70, 5 (1997).
  11. J. I. Cunneen, "Oxidative Aging of Natural Rubber", Rubber Chem. Technol., 41, 182 (1968). https://doi.org/10.5254/1.3539169
  12. J. R. Purdon, "The Vanderbilt Rubber Handbook", ed. by Robert F. Ohm, 13th Ed. p. 176, R. T. Vanderbilt Company, Inc., Norwalk, 1990.
  13. I.-S. Kim, B.-W. Lee, K.-S. Sohn, J. Yoon, and J.-H. Lee, "Characterization of the UV Oxidation of Raw Natural Rubber Thin Film Using Image and FT-IR Analysis", Elast. and Compos., 51, 1 (2016). https://doi.org/10.7473/EC.2016.51.1.1
  14. I.-S. Kim, D. Y. Lee, K.-S. Sohn, J.-H. Lee, and J. W. Bae, "Characterization of the Ozone Oxidation of Raw Natural Rubber Thin Film Using Image and FT-IR Analysis", Elast. and Compos., 54, 2 (2019).
  15. A. H. Eng, S. Kodama, K. Nagata, and H. Kawasaki, "Reaction of Moist Ozone with Natural Rubber: A Study by Attenuated Total Reflectance Spectroscopy", J. Rubber Res., 1, 3 (1998).
  16. D. L. Pavia, G. M. Lampman, and G. S. Kriz, "Introduction to Spectroscopy: A Guide for Students of Organic Chemistry", W. B. Saunders Co., Philadelphia, 1979.
  17. J. Xu, A. Zhang, T. Zhou, X. Cao, and Z. Xie, "A Study on Thermal Oxidation Mechanism of Styrene-Butadiene-Styrene Block Copolymer (SBS)", Polym. Degrad. Stab., 92, 1682 (2007). https://doi.org/10.1016/j.polymdegradstab.2007.06.008
  18. R. A. Mazzeo, N. A. Boisseau, and S. W. Hong, "Functions and Mechanism of Antidegradants to Prevent Polymer Degradation", ACS, 145th Meeting, April 19-22 (1994).
  19. R. Criegee, "Peroxide Reaction Mechanisms", p. 29, Interscience Publishers, New York, 1962.
  20. F. O. Aguele, J. A. Indiaghe, and T. U. Apugo-Nwosu, "A Study of Quality Improvement of Natural Rubber Products by Drying Methods", J. Mat. Sci. & Chem. Eng., 3, 7 (2015).
  21. F. Cataldo, O. Ursini, and G. Angelini, "Surface Oxidation of Rubber Crump Ozone", Polym. Degrad. Stab., 95, 803 (2010). https://doi.org/10.1016/j.polymdegradstab.2010.02.003
  22. Y. S. Duh, T. C. Ho, J. R. Chen, and C. S. Kao, "Study on Exothermic Oxidation of Acrylonitrile-butadiene-styrene (ABS) Resin Powder with Application to ABS Processing Safety", Polymers, 2, 174 (2010). https://doi.org/10.3390/polym2030174
  23. J. R. Shelton, "Aging and Oxidation of Elastomers", Rubber Chem. Technol., 30, 5 (1957). https://doi.org/10.5254/1.3542760