DOI QR코드

DOI QR Code

Multifunctional Fire Sensor Fabricated on a Flexible Substrate

플렉서블 기판상에 제작한 다기능 화재센서에 관한 연구

  • Seo, JoonYoung (Major of Electronic Materials Engineering, KMOU) ;
  • Ko, Dongwan (Major of Electronic Materials Engineering, KMOU) ;
  • Choi, Junseck (Major of Electronic Materials Engineering, KMOU) ;
  • Noh, JaeHa (Major of Electronic Materials Engineering, KMOU) ;
  • Jung, Jung-Yeul (Maritime Safety and Environmental Research Division, KRISO) ;
  • Lee, MoonJin (Maritime Safety and Environmental Research Division, KRISO) ;
  • Lee, Sangtae (Department of offshore plant management, KMOU) ;
  • Chang, Jiho (Major of Electronic Materials Engineering, KMOU)
  • 서준영 (한국해양대학교 전자소재공학전공) ;
  • 고동완 (한국해양대학교 전자소재공학전공) ;
  • 최준석 (한국해양대학교 전자소재공학전공) ;
  • 노재하 (한국해양대학교 전자소재공학전공) ;
  • 정정열 (선박해양플랜트연구소 해양안전환경연구본부) ;
  • 이문진 (선박해양플랜트연구소 해양안전환경연구본부) ;
  • 이상태 (한국해양대학교 해양플랜트 운영학과) ;
  • 장지호 (한국해양대학교 전자소재공학전공)
  • Received : 2019.12.10
  • Accepted : 2020.01.15
  • Published : 2020.01.31

Abstract

An integrated multifunctional sensor, capable of raising an early electric-fire warning, was fabricated. An arc-light, temperature, and humidity sensor was fabricated on a flexible substrate using a printed thin film of indium tin oxide. A polyethylene terephthalate (PET) substrate was used as the flexible substrate. The sensor was fabricated on a PET substrate, and its operating characteristics were tested. The operating performances of the sensor when serving as an arc-light, a temperature, and a humidity sensor were estimated to be 0.6247 Ω/W, 80.6 Ω/K, and -4.08 Ω/RH, respectively. The feasibility of the proposed fire sensor was demonstrated; it costs low and offers multiple functionalities.

Keywords

References

  1. http://www.nfa.go.kr/ (retrieved on Jul. 23, 2019)
  2. http://electimes.com/ (retrieved on Apr. 12, 2016)
  3. K. H. Chang, J. B. Lee, S. Y. Jo, G. M. Jeong, and H. S. Ahn, "Design and Implementation for a New Type of Integrated AFCI", Korean Inst. Electr. Eng., Vol. 2010, No. 4, pp 129-130, 2010.
  4. J. J. Kim, D. K. Kwak, T. J. Lee, D. H. Park, and J. H. Kim, "A study on Current Status and Problem Analysis of Flame Detector", Korean Inst. Power Electron., Vol. 2017, No. 7, pp 495-496, 2017.
  5. S. J. Park, S. C. Hwang, G. Ming, and G. S. Kil, "Detection of series Arc Signals by TEV Sensor in Low-voltage Switchboard", Korean Soc. Railw., Vol. 2010, No. 4, pp 1418-1422, 2016.
  6. D. B. Kim, H. S. Park, I. K. Kim, and D. Z. Lee, "Development of Partial Discharge and Arc Detecting System in Switchgear Panel", Korean Inst. Electr. Eng., Vol. 2010, No. 11, pp 256-257, 2010.
  7. K. H. Chang, K. M. Kim, J. O. Kim, and H. S. Ahn, "Design and Implementation of a ZigBee Network-based Intergrated AFCI", Inst. Internet, Broadcast. Commun., Vol. 10, No. 4, pp 41-48, 2010.
  8. G. H. Lee, W. S. Lim, and S. K. Kim, "Study on the Development of Optical Sensor Linear Fire Detection System Using Raman Scattering", Korean Inst. Fire Sci. Eng., Vol. 30, No. 4, pp. 27-38, 2016.
  9. S. M. Kang, Y. J. Jung, and J. H. Lee, "Comparison of the Properties of Almotriptan PVA Hydrogel Depending on the ratio of PEG and confirmation of potential as transdermal formulation", Korean Soc. Life Sci., Vol. 24. No. 4. pp 437-446, 2014.
  10. Y. K. Choi, B. D. Yoon, E. K. Kim, and M. C. Shin, "A Study on the Development of an Automatic Fire Extinguisher for Power Sub-station systems", Korean Inst. Fire Sci. Eng., Vol. 2010, No. 10, pp. 345-348, 2010.
  11. C. Trejo-Cruz, A. Mendoza-Galvan, A. M. Lopez-Beltran, and M. Gracia-Jimenez, "Effects of air annealing on the optical, electrical, and structural properties of indium-tin oxide thin films", Thin Solid Films,Vol. 517, No.16, pp. 4615-4620, 2009. https://doi.org/10.1016/j.tsf.2009.02.134
  12. D. P. Seo, J. E. Heo, T. H. Jang, C. Kim, and Y. J. Jo, "Crystalline State and Temperature-dependent Conductivity of Annealed ITO Thin Films", New Phys. Sae Mulli, Vol. 66, No. 4, pp. 392-397, 2016. https://doi.org/10.3938/NPSM.66.392