DOI QR코드

DOI QR Code

Digital Current Control Scheme for Boost Single-Phase PFC Converter Based on Virtual d-q Transformation

가상 d-q 변환을 이용한 승압형 단상 PFC 컨버터의 디지털 전류 제어 방법

  • Received : 2019.09.05
  • Accepted : 2019.11.21
  • Published : 2020.02.20

Abstract

A digital current control scheme using virtual d-q transformation for a boost single-phase power factor correction (PFC) converter is proposed. The use of virtual d-q transformation in single-phase power converters is known to improve current control performance. However, the conventional virtual d-q transformation-based digital current control scheme cannot be directly applied to the boost single-phase PFC converter because the current and average voltage waveforms of the inductor used in the converter are not sinusoidal. To cope with this problem, this study proposes a virtual sinusoidal signal generation method that converts the current and average voltage waveform of the inductor into a sinusoidal waveform synchronized with the grid. Simulation and experimental results are provided to show that the virtual d-q transformation-based digital current control is successfully applied to the boost single-phase PFC converter with the aid of the proposed virtual sinusoidal signal generation method.

Keywords

References

  1. TI website, "Power factor correction (PFC) topology comparison," [Online]. Available: https://training.ti.com/power-factor-correction-pfc-topology-comparison.
  2. M. Chen and J. Sun, "Feedforward current control of boost single-phase PFC converters," IEEE Trans. on Power Electron., Vol. 21, No. 2, pp. 338-345, Mar. 2006. https://doi.org/10.1109/TPEL.2005.869746
  3. Y. Y. Tzou, R. S. Ou, S. L. Jung, and M. Y. Chang, "High-performance programmable AC power source with low harmonic distortion using DSP based repetitive control technique," IEEE Trans. Power Electron., Vol. 12, No. 4, pp. 715-725, Jul. 1997. https://doi.org/10.1109/63.602567
  4. S. Fukuda and T. Yoda, "A novel current-tracking method for active filters based on a sinusoidal internal model," IEEE Trans. Ind. Appl., Vol. 37, No. 3, pp. 888-895, May/Jun. 2001. https://doi.org/10.1109/28.924772
  5. Y. Cho and J. S. Lai, "Digital plug-in repetitive controller for single-phase bridgeless PFC converters," IEEE Trans. Power Electron., Vol. 28, pp. 165-175, Jan. 2013. https://doi.org/10.1109/TPEL.2012.2196288
  6. D. H. Hwang, J. Lee, Y. Cho, and G. H. Choe, "Boost type PFC rectifier with active power decoupling circuit with repetitive controller," The Transactions of the Korean Institute of Power Electronics, Vol. 23, No. 6, pp. 389-396, Dec. 2018. https://doi.org/10.6113/TKPE.2018.23.6.389
  7. J. M. Olm, G. A. Ramos, and R. Costa-Castello, "Stability analysis of digital repetitive control systems under time-varying sampling period," IET Control Theory Appl., Vol. 5, No. 1, pp. 29-37, Jan. 2011. https://doi.org/10.1049/iet-cta.2009.0308
  8. M. Rashed, C. Klumpner, and G. Asher, "Repetitive and resonant control for a single-phase grid-connected hybrid cascaded multilevel converter," IEEE Trans. Power Electron., Vol. 28, pp. 2224-2234, May 2013. https://doi.org/10.1109/TPEL.2012.2218833
  9. D. Zmood and D. Holmes, "Stationary frame current regulation of PWM inverters with zero steady-state error," IEEE Trans. Power Electron., Vol. 18, pp. 814-822, May 2003. https://doi.org/10.1109/TPEL.2003.810852
  10. R. Zhang, M. Cardinal, P. Szczesny, and M. Dame, "A grid simulator with control of single-phase power converters in D-Q rotating frame," in Proc. IEEE 33th Power Electron. Specialists Conf., pp. 1431-1436, Jun. 2002.
  11. U. A. Miranda, M. Aredes, and L. G. B. Rolim, "A D-Q synchronous reference frame current control for single-phase converters," in Proc. IEEE 36th Power Electron. Spec. Conf., pp. 1377-1381, Jun. 2005.
  12. K. W. Lee and T. Kim, "Operating-point insensitive voltage control of the Z-source inverter based on an indirect capacitor current control," IET Power Electron., Vol. 8, No. 8, pp. 1358-1366, Aug. 2015. https://doi.org/10.1049/iet-pel.2014.0463
  13. S. K. Sul, Control of electric machine drive systems, John Wiley & Sons, 2011.