한국수소및신에너지학회논문집 (Transactions of the Korean hydrogen and new energy society)

  • 제31권1호
  • /
  • Pages.160-168
  • /
  • 2020
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지
DOI QR코드

DOI QR Code

해상풍력 터빈과 모노파일 하부기초를 연결하는 플랜지 방식 트랜지션 피스의 기본설계

Basic Design of a Flange Connected Transition Piece between Offshore Wind Turbine and Monopile Foundation

  • 이강희 (부산연구본부, 한국조선해양기자재연구원) ;
  • 박성규 (부산연구본부, 한국조선해양기자재연구원) ;
  • 김건호 (부산연구본부, 한국조선해양기자재연구원) ;
  • 황태규 (부산연구본부, 한국조선해양기자재연구원)
  • LEE, KANGHEE (Busan Headquarters, Korea Marine Equipment Research Institute) ;
  • PARK, SUNGGYU (Busan Headquarters, Korea Marine Equipment Research Institute) ;
  • KIM, GEONHO (Busan Headquarters, Korea Marine Equipment Research Institute) ;
  • HWANG, TAEGYU (Busan Headquarters, Korea Marine Equipment Research Institute)
  • 투고 : 2019.12.31
  • 심사 : 2020.02.28
  • 발행 : 2020.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Depending on the water depth and composition of seabed, there exist different alternatives for the wind turbine supporting structures. Among several types of the structures, the monopile foundation is the dominant solution for support structure, accounting for over 80% of the offshore wind turbines in Europe. To develop the monopile foundation suitable for domestic ocean environment, a basic design of a transition piece was carried out. This paper presents the design procedure of a flange connected transition piece and results of the structural safety assessment.

키워드

참고문헌

  1. C. A. Madsen, J. C. Kragh-Poulsen, K. J. Tage, and M. J. Andreassen, "Analytical and numerical investigation of bolted steel ring flange connection for offshore wind monopile foundations", I.O.P Conference Series: Materials Science and Engineering, Vol. 276, 2017, doi: https://doi.org/10.1088/1757-899X/276/1/012034.
  2. DNVGL-ST-0126, "Support structures for wind turbines", 2018. Retrieved from https://rules.dnvgl.com/docs/pdf/DNVGL/ST/2018-07/DNVGL-ST-0126.pdf.
  3. DNVGL-ST-0437, "Loads and site conditions for wind turbines", 2016. Retrieved from https://rules.dnvgl.com/docs/pdf/DNVGL/ST/2016-11/DNVGL-ST-0437.pdf.
  4. DNVGL-RP-0416, "Corrosion protection for wind turbines", 2016. Retrieved from https://rules.dnvgl.com/docs/pdf/DNVGL/RP/2016-03/DNVGL-RP-0416.pdf.
  5. DNVGL-RP-C203, "Fatigue design of offshore steel structures", 2016. Retrieved from https://oilgas.standards.dnvgl.com/download/dnvgl-rp-c203-fatigue-design-ofoffshore-steel-structures.
  6. Korea Electric Power Research Institute, "Design basis of 2.5 GW offshore wind farm in the southwestern sea", 2016.
  7. IEC 61400-3, "Wind energy genration systems-part 3-1: design requirements for fixed offshore wind turbines", 2019. Retrieved from https://webstore.iec.ch/publication/29360.
  8. P. Schaumann and R. Eichstadt, "Experimental and analytical fatigue assessment of high-strength bolts for wind turbine structures", Conference paper, 2018. Retrieved from https://www.researchgate.net/publication/335703565_Experimental_and_Analytical_Fatigue_Assessment_of_High-Strength_Bolts_for_Wind_Turbine_Structures.
  9. D. Y. Lee and S. S. Lim, "Effects of flange tilt on bolt performance at the flange joint in a wind tower", Proc. of the 2019 Fall Conference of Korea Wind Energy Association, 2019.