References
- Albert, R.J., Lishman, J.M., & Saxena, J.R. (2013). Ballast Water Regulations and the Move Toward Concentration Based Numeric Discharge Limits. Ecological Applications. 23(2), 289-300. https://doi.org/10.1890/12-0669.1
- GEF, U., & IMO, G.P. (2011). GESAMP. Establishing Equivalency in the Performance Testing and Compliance Monitoring of Emerging Alternative Ballast Water Management Systems (EABWMS), A Technical Review.
- Isbester, J. (2010). Bulk Carrier Practice. Nautical Institute.
- Kang, H.J., Yang, Y.-S., Ki, M.S., Shin, M.S., Choi, J., Cha, J.H., & Lee, D. (2016). A Concept Study for Cost Effective NGH Mid-stream Supply Chain Establishing Strategies. Ocean Engineering, 113, 162-173. https://doi.org/10.1016/j.oceaneng.2015.12.052
- Kang, H.J., Choi, J., Ahn, H.-S., & Kim, K.-S. (2017). Systems Engineering-basis Feasibility Study for Development of Ballast Water-Free Vessel. Proceedings of IMAM 2017, Maritime Transportation and Harvesting of Sea Resources. Lisbon, Portugal.
- Kerr, S. (1994). Ballast Water Ports and Shipping Study (No. 5). AGPS.
- Kim, J., Park, I.R., Kim, K.S., Van, S.H., & Kim, Y.C. (2011). Development of Numerical Method for the Evaluation of Ship Resistance and Self-Propulsion Performances. Journal of the Society of Naval Architects of Korea. 48(2), 147-157. https://doi.org/10.3744/SNAK.2011.48.2.147
- Kim, Y.C., Kim, K.S., & Kim, J. (2014). Numerical Prediction of Ship Hydrodynamic Performances using Explicit Algebraic Reynolds Stress Turbulence Model. Journal of the Society of Naval Architects of Korea. 51(1), 67-77. https://doi.org/10.3744/SNAK.2014.51.1.67
- Lee, G.J. (2015). Dynamic Orifice Flow Model and Compartment Models for Flooding Simulation of a Damaged Ship. Ocean Engineering Journal, 109, 635-653. https://doi.org/10.1016/j.oceaneng.2015.09.051
- Leonard, J. (1999). Systems Engineering Fundamentals. Defense Ssystems Management Coll Fort Belvoir VA.
- Parsons, M.G., & Kotinis, M. (2011a). Refinement of the Ballast-Free Ship Concept, Department of Naval Architecture and Marine Engineering. University of Michigan.
- Parsons, M.G., & Kotinis, M. (2011b). Trim and Draft Control Capability of the Variable Buoyancy Ship. Journal of Ship Production and Design. 27(3), 118-126. https://doi.org/10.5957/jspd.2011.27.3.118
- Park, B., Jung, D.W., Jung, J., Park, I., Cho, S.K., & Sung, H.G. (2019). Experimental Study on Estimation of Roll Damping for Various Mid-ship Sections. Journal of Ocean Engineering Technology. 33(4), 322-329. https://doi.org/10.26748/KSOE.2019.004
- Shingo, S. (2014). Preliminary Hull Form Planning for Non-Ballast Water Ship and Minimal Ballast Water Ship (1st Report)-Simplified Estimation Method of Propulsive Performance. Journal of the Japan Society of Naval Architects and Ocean Engineers. 20, 21-26. https://doi.org/10.2534/jjasnaoe.20.21
- Werschkun, B., Banerji, S., Basurko, O.C., David, M., Fuhr, F., Gollasch, S., ... Kehrer, A. (2014). Emerging Risks from Ballast Water Treatment: The Run-up to the International Ballast Water Management Convention. Chemosphere. 112, 256-266. https://doi.org/10.1016/j.chemosphere.2014.03.135