한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제19권3호
  • /
  • Pages.14-21
  • /
  • 2020
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

자동차 시트 프레임의 형상별 내구성 해석에 관한 연구

Durability Analysis of Automotive Seat Frame by Shape

  • 최계광 (공주대학교 금형설계공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Choi, Kyekwang (Department of Metal Mold Design Engineering, Kongju National UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 투고 : 2019.11.01
  • 심사 : 2019.11.27
  • 발행 : 2020.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The automotive seat appropriately absorbs the vibrations or shocks transmitted through a vehicle when it is in operation so as to provide a comfortable ride for passengers. In this study, the structural strength and durability of each model were investigated using structural analysis. The natural and critical frequencies at the seat were analyzed through vibration analysis. Through the results of this study on automotive seat frame models, the durability against the load and vibration is shown to be dependent on the configuration of the model.

키워드

참고문헌

  1. Cho, S. J., Han, J. W., Park, Y. J. and Lee, G. H., “Structural analysis of a planetary gear carrier in the slewing reducer for tower crane,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5, pp. 1-7, 2014. https://doi.org/10.14775/ksmpe.2014.13.5.001
  2. Jung, Y. S., Gao, J. C., Kim, J. Y. and You, G. J., “A Study on the Structural Analysis of Fiber Guide accept to 4C MM Optical Fiber,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 75-80, 2017. https://doi.org/10.14775/ksmpe.2017.16.6.075
  3. Ko, J. H. and Kang, D. M., “CAE Analysis on Strength and Fatigue of Rear Door of Passenger Car,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 63-69, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.063
  4. Ha, S. H., Kim, S. J. and Song, J. I., “Structure Analysis and Torque Reduction Design of Industrial Ball Valve,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 6, pp. 37-45, 2014. https://doi.org/10.14775/ksmpe.2014.13.6.037
  5. Lee, J. H. and Cho, J. U., “Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis,” Journal of the Korea Convergence Society, Vol. 6, No. 4, pp. 99-104, 2015. https://doi.org/10.15207/JKCS.2015.6.4.099
  6. Lee, J. H. and Cho, J. U., “Study on Convergence Technique through Structural Analysis due to the Height of the Walker,” Journal of the Korea Convergence Society, Vol. 6, No. 2, pp. 19-24, 2015. https://doi.org/10.15207/JKCS.2015.6.2.019
  7. Her, Y. Y. and Yang, Y. J., “Structural Analysis on Development of Roller Jig for Peeling Machine,” Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 2, pp. 242-248, 2017. https://doi.org/10.17958/ksmt.19.2.201704.242
  8. Cha, J. M., Byun, S. J. Wang, Z. H. and Kwon, Y. C., “Study on Structural and Fatigue Analysis according to Shape change of Automatic Press,” Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 2, pp. 156-161, 2017. https://doi.org/10.17958/ksmt.19.2.201704.156
  9. Wang, J. H. and Kwon, Y. C., “Structural Analysis of Center Pillar according to Applied Load,” Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 401-406, 2018. https://doi.org/10.17958/ksmt.20.4.201808.401
  10. Wang, J. H. and Kwon, Y. C., “Structural Analysis according to Load of Height- adjustable Table,” Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 3, pp. 273-278, 2018. https://doi.org/10.17958/ksmt.20.3.201806.273
  11. Choi, G. G. and Cho, J. U., “A Convergence Study through Durability Analysis due to the Configuration of Automotive Frame Butted,” Journal of the Korea Convergence Society, Vol. 9, No. 11, pp. 271-276, 2018. https://doi.org/10.15207/JKCS.2018.9.11.271
  12. Park, J. W., “Structural Analysis of a Tractor Cabin Considering Structure Production Error,” Journal of the Korea Convergence Society, Vol. 8, No. 5, pp. 155-160, 2017. https://doi.org/10.15207/JKCS.2017.8.1.155
  13. Kang, H. J., Kim, B. H., Kim, B. H. and Seo, J. H., “Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.058