Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Grinding Performance Comparison of Diamond Wheel Characteristics

다이아몬드 휠 특성에 따른 연삭성능 비교에 관한 연구

  • 차승환 (금오공과대학교 기계설계공학과) ;
  • 하병철 (금오공과대학교 기계설계공학과) ;
  • 양동호 (금오공과대학교 기계설계공학과) ;
  • 박상현 (금오공과대학교 기계설계공학과) ;
  • 이종찬 (금오공과대학교 기계설계공학과)
  • Received : 2019.12.16
  • Accepted : 2020.02.23
  • Published : 2020.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Alumina, a typical ceramic material used for semiconductors and display parts, is the subject of research and development efforts for mineral material processing. Alumina is extremely difficult to process since it is brittleness to either fine ceramics material. We have studied the shape of diamond particles and their use in machinability for alumina processing. Our study was carried out under various processing conditions, including cutting speed, table speed, and the surface roughness of the work piece. We also analyzed the wear characteristics of the tool by total cutting.

Keywords

References

  1. Lee, J. C., Grinding & Machining with Superabrasives, Munundang, pp. 96-100, 1998.
  2. Lee, J. C., Mechanics for the 21st century, Munundang, pp. 406-416, 2005.
  3. Kim, G. M., "Study on the wearing behavior of diamond tool used to machining of ceramics Ceramics, Green body, Sintered ceramic", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 73-79, 2011
  4. Choi, H. and Kim, C. S., "The Effects on a Side-Cut Grinding depend on the Change of the Quill Rigidity", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 5, pp. 36-41, 2013.