DOI QR코드

DOI QR Code

Electro-mechanical impedance based strength monitoring technique for hydrating blended cements

  • Thirumalaiselvi, A. (Special and Multifunctional Structures Laboratory, CSIR-Structural Engineering Research Centre) ;
  • Sasmal, Saptarshi (Special and Multifunctional Structures Laboratory, CSIR-Structural Engineering Research Centre)
  • Received : 2019.11.11
  • Accepted : 2020.01.28
  • Published : 2020.06.25

Abstract

Real-time monitoring of stiffness and strength in cement based system has received significant attention in past few decades owing to the development of advanced techniques. Also, use of environment friendly supplementary cementitious materials (SCM) in cement, though gaining huge interest, severely affect the strength gain especially in early ages. Continuous monitoring of strength- and stiffness- gain using an efficient technique will systematically facilitate to choose the suitable time of removal of formwork for structures made with SCM incorporated concrete. This paper presents a technique for monitoring the strength and stiffness evolution in hydrating fly ash blended cement systems using electro-mechanical impedance (EMI) based technique. It is important to observe that the slower pozzolanic reactivity of fly ash blended cement systems could be effectively tracked using the evolution of equivalent local stiffness of the hydrating medium. Strength prediction models are proposed for estimating the strength and stiffness of the fly ash cement system, where curing age (in terms of hours/days) and the percentage replacement of cement by fly ash are the parameters. Evaluation of strength as obtained from EMI characteristics is validated with the results from destructive compression test and also compared with the same obtained from commonly used ultrasonic wave velocity (UPV). Statistical error indices indicate that the EMI technique is capable of predicting the strength of fly ash blended cement system more accurate than that from UPV. Further, the correlations between stiffness- and strength- gain over the time of hydration are also established. From the study, it is found that EMI based method can be effectively used for monitoring of strength gain in the fly ash incorporated cement system during hardening.

Keywords

Acknowledgement

The authors would like to acknowledge the members of Special and Multifunctional Structures Laboratory, CSIR-SERC for their help during experiments. Special and sincere thanks to Mr. Rajinikant Rao and Mr. Gautham, PhD scholars, AcSIR, CSIR-SERC for their immense help rendered during continuous impedance measurements.

References

  1. ACI 318 (1995), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, USA.
  2. ASTM C-09 on Concrete and Concrete Aggregates (2013), Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, ASTM International; PA, USA.
  3. Bhalla, S. (2004), "A mechanical impedance approach for structural identification, health monitoring and non-destructive evaluation using piezo-impedance transducers", Doctoral Dissertation; Nanyang Technological University, School of Civil & Environmental Engineering, Singapore.
  4. Bhalla, S., Vittal, P.A. and Veljkovic, M. (2012), "Piezo-impedance transducers for residual fatigue life assessment of bolted steel joints", Struct. Health Monitor., 11(6), 733-750. https://doi.org/10.1177%2F1475921712458708 https://doi.org/10.1177/1475921712458708
  5. Bhalla, N., Sharma, S., Sharma, S. and Siddique, R. (2018), "Monitoring early-age setting of silica fume concrete using wave propagation techniques", Constr. Build. Mater., 162, 802-815. https://doi.org/10.1016/j.conbuildmat.2017.12.032
  6. Demirboga, R., Turkmen, I. and Karakoc, M.B. (2004), "Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete", Cement Concrete Res., 34(12), 2329-2336. https://doi.org/10.1016/j.cemconres.2004.04.017
  7. Diogenes, H.J.F., Cossolino, L.C., Pereira, A.H.A., El Debs, M.K. and El Debs, A.L.H.C. (2011), "Determination of modulus of elasticity of concrete from the acoustic response", Revista IBRACON de Estruturas e Materiais, 4(5), 803-813. http://dx.doi.org/10.1590/S1983-41952011000500007
  8. Galan, A. (1967), "Estimate of concrete strength by ultrasonic pulse velocity and damping constant", J. Proceedings, 64(10), 678-684. https://doi.org/10.14359/7596
  9. Ghafari, E., Yuan, Y., Wu, C., Nantung, T. and Lu, N. (2018), "Evaluation the compressive strength of the cement paste blended with supplementary cementitious materials using a piezoelectric-based sensor", Constr. Build. Mater., 171, 504-510. https://doi.org/10.1016/j.conbuildmat.2018.03.165
  10. Gul, R., Demirboga, R. and Guvercin, T. (2006), "Compressive strength and ultrasound pulse velocity of mineral admixtured mortars", Ind. J. Eng. Mater. Sci., 13, 18-24. http://nopr.niscair.res.in/handle/123456789/7210
  11. Hassett, D.J. and Eylands, K.E. (1997), "Heat of hydration of fly ash as a predictive tool", Fuel, 76(8), 807-809. https://doi.org/10.1016/S0016-2361(97)00058-6
  12. Hemalatha, T. and Sasmal, S. (2018), "Early-age strength development in fly ash blended cement composites: investigation through chemical activation", Magaz. Concrete Res., 71(5), 260-270. https://doi.org/10.1680/jmacr.17.00336
  13. Huynh, T.C. and Kim, J.T. (2017), "Quantitative damage identification in tendon anchorage via PZT interface-based impedance monitoring technique", Smart Struct. Syst., Int. J., 20(2), 181-195. https://doi.org/10.12989/sss.2017.20.2.181
  14. Huynh, T.C., Dang, N.L. and Kim, J.T. (2018), "PCA-based filtering of temperature effect on impedance monitoring in prestressed tendon anchorage", Smart Struct. Syst., Int. J., 22, 57-70. https://doi.org/10.12989/sss.2018.22.1.057
  15. IS 4031 (1968), Methods of Physical Tests for Hydraulic Cement, Part I, Bureau of Indian Standards, New Delhi, India.
  16. Ji, Q., Ho, M., Zheng, R., Ding, Z. and Song, G. (2015), "An exploratory study of stress wave communication in concrete structures", Smart Struct. Syst., Int. J., 15(1), 135-150. https://doi.org/10.12989/sss.2015.15.1.135
  17. Kang, M.S., An, Y.K. and Kim, D.J. (2018), "Electrical impedance-based crack detection of SFRC under varying environmental conditions", Smart Struct. Syst., Int. J., 22(1), 1-11. https://doi.org/10.12989/sss.2018.22.1.001
  18. Kim, J., Kim, J.W. and Park, S. (2014), "Early-Age Concrete Strength Estimation Technique using Embedded Piezoelectric self-sensing impedance", Proceedings of EWSHM-7th European Workshop on Structural Health Monitoring, Inria, July.
  19. Kondraivendhan, B. and Bhattacharjee, B. (2015), "Flow behavior and strength for fly ash blended cement paste and mortar", Int. J. Sustain. Built Environ., 4(2), 270-277. https://doi.org/10.1016/j.ijsbe.2015.09.001
  20. Lam, L., Wong, Y.L. and Poon, C.S. (2000), "Degree of hydration and gel/space ratio of high-volume fly ash/cement systems", Cement Concrete Res., 30(5), 747-756. https://doi.org/10.1016/S0008-8846(00)00213-1
  21. Lee, H.K., Lee, K.M., Kim, Y.H., Yim, H. and Bae, D.B. (2004), "Ultrasonic in-situ monitoring of setting process of high-performance concrete", Cement Concrete Res., 34(4), 631-640. https://doi.org/10.1016/j.cemconres.2003.10.012
  22. Liang, C., Sun, F.P. and Rogers, C.A. (1997), "Coupled electro-mechanical analysis of adaptive material systems-determination of the actuator power consumption and system energy transfer", J. Intel. Mater. Syst. Struct., 8(4), 335-343. https://doi.org/10.1177/1045389X9400500102
  23. Lim, Y.Y., Kwong, K.Z., Liew, W.Y.H. and Soh, C.K. (2016), "Non-destructive concrete strength evaluation using smart piezoelectric transducer-A comparative study", Smart Mater. Struct., 25(8), 085021. https://doi.org/10.1088/0964-1726/25/8/085021
  24. Lin, Y., Lai, C.P. and Yen, T. (2003), "Prediction of ultrasonic pulse velocity (UPV) in concrete", Mater. J., 100(1), 21-28. https://doi.org/10.14359/12459
  25. Lu, Y., Ma, H. and Li, Z. (2015), "Ultrasonic monitoring of the early-age hydration of mineral admixtures incorporated concrete using cement-based piezoelectric composite sensors", J. Intel. Mater. Syst. Struct., 26(3), 280-291. https://doi.org/10.1177/1045389X14525488
  26. Marsh, B.K. and Day, R.L. (1988), "Pozzolanic and cementitious reactions of fly ash in blended cement pastes", Cement Concrete Res., 18(2), 301-310. https://doi.org/10.1016/0008-8846(88)90014-2
  27. Mohammed, B.S. and Adamu, M. (2018), "Non-destructive evaluation of nano silica-modified roller-compacted rubbercrete using combined SonReb and response surface methodology", Road Mater. Pavement Des., 1-21. https://doi.org/10.1080/14680629.2017.1417891
  28. Mohanraj, K., Sivakumar, G. and Barathan, S. (2010), "Hydration process of fly ash blended cement composite", Int. J. Chem. Sci., 8(1), 589-601.
  29. Namagga, C. and Atadero, R.A. (2009), "Optimization of fly ash in concrete: High lime fly ash as a replacement for cement and filler material", Proceedings of World of Coal Ash Conference (WOCA), Lexington, KY, USA, May.
  30. Neville, A.M. (1995), Properties of Concrete, Longman, London, UK.
  31. Popovics, J.S., Zemajtis, J. and Shkolnik, I. (2008), "A study of static and dynamic modulus of elasticity of concrete", ACI-CRC Final Report, American Concrete Institute; Farmington Hills, MI, USA.
  32. Prem, P.R., Thirumalaiselvi, A. and Verma, M. (2019), "Applied linear and nonlinear statistical models for evaluating strength of Geopolymer concrete", Comput. Concrete, Int. J., 24(1), 7-17. https://doi.org/10.12989/cac.2019.24.1.007
  33. Qin, L. and Li, Z. (2008), "Monitoring of cement hydration using embedded piezoelectric transducers", Smart Mater. Struct., 17(5), 055005. https://doi.org/10.1088/0964-1726/17/5/055005
  34. Qixian, L. and Bungey, J.H. (1996), "Using compression wave ultrasonic transducers to measure the velocity of surface waves and hence determine dynamic modulus of elasticity for concrete", Constr. Build. Mater., 10(4), 237-242. https://doi.org/10.1016/0950-0618(96)00003-7
  35. Quinn, W., Kelly, G. and Barrett, J. (2012), "Development of an embedded wireless sensing system for the monitoring of concrete", Struct. Health Monitor., 11(4), 381-392. https://doi.org/10.1177%2F1475921711430438 https://doi.org/10.1177/1475921711430438
  36. Rajabi, M., Shamshirsaz, M. and Naraghi, M. (2017), "Crack detection in rectangular plate by electromechanical impedance method: modeling and experiment", Smart Struct. Syst., Int. J., 19(4), 361-369. https://doi.org/10.12989/sss.2017.19.4.361
  37. Sahmaran, M., Yaman, O. and Tokyay, M. (2007), "Development of high-volume low-lime and high-lime fly-ash-incorporated self-consolidating concrete", Magaz. Concrete Res., 59(2), 97-106. https://doi.org/10.1680/macr.2007.59.2.97
  38. Sakai, E., Miyahara, S., Ohsawa, S., Lee, S.H. and Daimon, M. (2005), "Hydration of fly ash cement", Cement Concrete Res., 35(6), 1135-1140. https://doi.org/10.1016/j.cemconres.2004.09.008
  39. Salman, A.P.D.M.M. and Al-Amawee, E.A.H. (2018), "The ratio between static and dynamic modulus of elasticity in normal and high strength concrete", J. Eng. Sustain. Develop., 10(2), 163-174.
  40. Saravanan, T.J., Balamonica, K., Priya, C.B., Reddy, A.L. and Gopalakrishnan, N. (2015), "Comparative performance of various smart aggregates during strength gain and damage states of concrete", Smart Mater. Struct., 24(8), 085016. https://doi.org/10.1088/0964-1726/24/8/085016
  41. Saravanan, T.J., Balamonica, K., Bharathi Priya, C., Gopalakrishnan, N. and Murthy, S.G.N. (2017), "Piezoelectric EMI-based monitoring of early strength gain in concrete and damage detection in structural components", J. Infrastruct. Syst., 23(4), 04017029. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000386
  42. Sata, V., Jaturapitakkul, C. and Kiattikomol, K. (2007), "Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete", Constr. Build. Mater., 21(7), 1589-1598. https://doi.org/10.1016/j.conbuildmat.2005.09.011
  43. Shafiq, N. (2011), "Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system", KSCE J. Civil Eng., 15(7), 1253. https://doi.org/10.1007/s12205-011-1193-x
  44. Shin, S.W., Qureshi, A.R., Lee, J.Y. and Yun, C.B. (2008), "Piezoelectric sensor based nondestructive active monitoring of strength gain in concrete", Smart Mater. Struct., 17(5), 055002. https://doi.org/10.1088/0964-1726/17/5/055002
  45. Sofi, M., Lumantarna, E., Zhou, Z., San Nicolas, R. and Mendis, P. (2017), "From Hydration to Strength Properties of Fly Ash Based Mortar", J. Mater. Sci. Chem. Eng., 5(12), 63. https://doi.org/10.4236/msce.2017.512006
  46. Soh, C.K. and Bhalla, S. (2005), "Calibration of piezo-impedance transducers for strength prediction and damage assessment of concrete", Smart Mater. Struct., 14(4), 671. https://doi.org/10.1088/0964-1726/14/4/026
  47. Talakokula, V., Bhalla, S. and Gupta, A. (2018), "Monitoring early hydration of reinforced concrete structures using structural parameters identified by piezo sensors via electromechanical impedance technique", Mech. Syst. Signal Process., 99, 129-141. https://doi.org/10.1016/j.ymssp.2017.05.042
  48. Tanesi, J. and Ardani, A. (2013), "Isothermal Calorimetry as a Tool to Evaluate Early-Age Performance of Fly Ash Mixtures", Transportation Research Record, 2342(1), 42-53. https://doi.org/10.3141/2342-06
  49. Tawie, R. and Lee, H.K. (2010), "Monitoring the strength development in concrete by EMI sensing technique", Constr. Build. Mater., 24(9), 1746-1753. https://doi.org/10.1016/j.conbuildmat.2010.02.014
  50. Tharmaratnam, K. and Tan, B.S. (1990), "Attenuation of ultrasonic pulse in cement mortar", Cement Concrete Res., 20(3), 335-345. https://doi.org/10.1016/0008-8846(90)90022-P
  51. Thomas, M.D.A. (2007), "Optimizing the use of fly ash in concrete (Vol. 5420)", Skokie, IL: Portland Cement Association.
  52. Trtnik, G., Kavcic, F. and Turk, G. (2009), "Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networks", Ultrasonics, 49(1), 53-60. https://doi.org/10.1016/j.ultras.2008.05.001
  53. Verma, M., Thirumalaiselvi, A. and Rajasankar, J. (2017), "Kernel-based models for prediction of cement compressive strength", Neural Comput. Applicat., 28(1), 1083-1100. https://doi.org/10.1007/s00521-016-2419-0
  54. Wang, D. and Zhu, H. (2011), "Monitoring of the strength gain of concrete using embedded PZT impedance transducer", Constr. Build. Mater., 25(9), 3703-3708. https://doi.org/10.1016/j.conbuildmat.2011.04.020
  55. Wang, D., Song, H. and Zhu, H. (2014), "Embedded 3D electromechanical impedance model for strength monitoring of concrete using a PZT transducer", Smart Mater. Struct., 23(11), 115019. https://doi.org/10.1088/0964-1726/23/11/115019
  56. Wolfs, R.J.M., Bos, F.P. and Salet, T.A.M. (2018), "Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete", Constr. Build. Mater., 181, 447-454. https://doi.org/10.1016/j.conbuildmat.2018.06.060
  57. Yoon, H., Kim, Y., Kim, H., Kang, J. and Koh, H.M. (2017), "Evaluation of early-age concrete compressive strength with ultrasonic sensors", Sensors, 17(8), 1817. https://doi.org/10.3390/s17081817
  58. Zhang, S., Zhang, Y. and Li, Z. (2018), "Ultrasonic monitoring of setting and hardening of slag blended cement under different curing temperatures by using embedded piezoelectric transducers", Constr. Build. Mater., 159, 553-560. https://doi.org/10.1016/j.conbuildmat.2017.10.124
  59. Zheng, Y., Chen, D., Zhou, L., Huo, L., Ma, H. and Song, G. (2018), "Evaluation of the effect of fly ash on hydration characterization in self-compacting concrete (SCC) at very early ages using piezoceramic transducers", Sensors, 18(8), 2489. https://doi.org/10.3390/s18082489