참고문헌
- Y. J. Cho, "A Research on the Technology Trend and Future Market Prospect of EV/HEV", Master's Thesis, Hanyang Univ., Seoul, Republic of Korea, 2017.
- J. S. Sa, Y. H. Shin, T. W. Kang, and C. M. Kim, "A Study on the Characteristics of Idle Vibration due to the Type of Constant Velocity Joints", Trans. Kor. Soc. Automotive Eng., 16, 183 (2008).
- K. S. Park, B. J. Kim, J. H. Jang, and Y. H. Moon, "Development of CV Joint Outer Race Ball Groove Measurement System", Proc. Kor. Soc. Tech. Plast. Conf., 160 (2005).
- E. J. Lee, K. H. Lim, and V. T. Giang, "Optimum Design of Rubber Injection Molding Process", Kor. Chem. Eng. Research, 49, 47 (2011) . https://doi.org/10.9713/kcer.2011.49.1.047
- J. H. Kim and B. Y. Lee, "Nonlinear Stress Analysis of Dust Covers for Ball Joint of Automotive Steering System", Trans. Kor. Soc. Mech. Eng. A, 37, 1297 (2013). https://doi.org/10.3795/KSME-A.2013.37.10.1297
- H. Huh, "Self Contact Analysis of Rubber-Bootss for C. V. Joints by a 3-D Finite Element Method", Master's Thesis, KAIST, Daejeon, Republic of Korea, 1997.
- I. K. Lee, J. H. Lee, H. S. Hwang, H. Y. Yim, C. B. You, Y. K. Kim, and C. H. Kim, "Failure Examples Study Including with Timing Belt, Constant Velocity Boots and Weather Strip on a Car", J. Kor. Institute of Gas, 19, 6 (2015). https://doi.org/10.7842/kigas.2015.19.1.6
- Y. S. Shim, "Finite Element Analysis of C. V. Joint Boots to Increase Durability Performance", Master's Thesis, Kangwon National Univ. Kangwon, Republic of Korea, 1996.
- H. K. Lee and K. H. Lee, "Analytical Design Study on CVJ Boots Applying TPEE Material", Trans. Kor. Soc. of Automotive Eng., 3, 1542 (2002).
- T. Y. Lee, "Modification of Thermoplastic Polyether-ester Elastomer for Automotive Application", Ph. D. Thesis, Kyungpook National Univ. Kyungpook, Republic of Korea, 2010.
- S. H. Kim, H. W. Lee, H. Huh, J. H. Lee, and S. T. Oh, "Stress Analysis of C. V. Joint Rubber Bootss by Finite Element Method and Application to Design Modification", Trans. Kor. Soc. Automotive Eng., 6, 123 (1998).
- C. Shashikanth and K. Mahesh Dutt., "Non Linear Analysis of Rubber Boots Sear", International J. Eng. Research & Tech., 2, 1970 (2013).
- N. Woo, B. Ross, and R. West, "Need for Accurate Initial Conditions to Simulate Flexible Structures in Motion", Trans. Kor. Soc. Eng. C, 3, 97 (2015).
- N. J. Jeong, "A Study of Optimum Geometry for a Rubber Air Spring of Commercial Vehicle using the Non-linear Finite Element Method, Master's Thesis, Inje Univ., Kangwon, Republic of Korea, 2007.
- W. D. Kim, C. S. Woo, and S. W. Han, "Finite Element Analysis and Fatigue Life Evaluation of Automotive Rubber Insulator", Elastomers, 33, 1159 (1998).
- C. W. Park, C. H. Park, S. D. Choi, and H. J. Choi, "Analysis of Deformations of Dust-seal in Ball Joint used for Automobile Part", Proc. Kor. Soc. Precision Eng. Spring Annual Meeting, 765 (2009).
- D. W. Hainest and W. D. Wilson, "Strain-Energy Density Function for Rubber like Material", J. Mech. Phys. Solids, 29, 345 (1979).
- U. C. Baek, M. H. Cho, and J. S. Hawong, "Material Properties for Reliability Improvement in the FEA Results for Rubber Parts", Trans. Kor. Soc. Mech. Eng. A, 35, 1521 (2011). https://doi.org/10.3795/KSME-A.2011.35.11.1521