Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

A Convergent Investigation on Structural Analysis with Thermal Stress at the Shape of Brake Disk for Racing Car

경주용 자동차 브레이크 디스크 형상에서의 열 응력 및 구조 해석에 관한 융합 연구

  • Oh, Bum-Suk (Division of Mechanical & Automotive Engineering, Kongju National University) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
  • 오범석 (공주대학교 기계자동차공학부) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2020.04.03
  • Accepted : 2020.06.20
  • Published : 2020.06.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the model A with the existing shape used at racing car and the model B with light weight were designed. The structural analysis with thermal deformation and stress were carried out. Model A shows that the maximum temperature is lower than model B. The cooling performance due to the shape of the disk without any other cooling conditions can be shown to be better for model A. Model A was seen to be superior in durability as the thermal stress reduced by almost twice as much as model B. The part where the greatest stress occurred appeared to be the hole jointed with the hub regardless of its shape. The analysis results at this study are seen to be useful at designing the shape of the actual vehicle brake disc. The analysis results obtained in this study can be applied at grasping the strength of the brake disk for racing car practically. By utilizing the analysis result of the brake disk for racing car, this study is seen as the convergence study that the aesthetic design and analysis are applied.

본 연구에서는 경주용 자동차에서 기존에 사용 중인 형상을 가진 모델 A와 경량화를 한 모델 B를 설계하고 열 변형과 열응력을 동반한 구조해석을 하였다. Model A가 Model B에 비하여 최고온도가 낮음을 보인다. 다른 냉각 조건이 주어지지 않고 디스크의 형상에 따른 냉각성능은 Model A가 더 뛰어남을 알 수 있다. Model A가 Model B에 비하여 거의 2배 이상으로 그 열응력이 낮아져 내구성면에서도 우수함을 알 수 있었다. 응력이 가장 크게 나타나는 부분은 형상에 관계없이 허브와 접합되는 구멍으로 나타났다. 본 연구에서의 해석결과는 실제 자동차 브레이크 디스크의 형상을 설계하는데 있어서 유용하다고 보인다. 본 연구에서 얻은 해석 결과는 실제적으로 경주용 자동차 브레이크 디스크의 강도를 파악하는 데에 적용될 수 있다. 경주용 자동차 브레이크 디스크의 해석 결과를 이용함으로서, 본 연구가 미적인 설계 및 해석이 적용된 융합 연구라고 보여진다.

Keywords

References

  1. J. S. Lee. (2018). Structural Analysis of a 24 Person Elevator Emergency Brake. Journal of the Korea Convergence Society, 9(12), 189-194. DOI : 10.15207/JKCS.2018.9.12.189
  2. J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique through Structural Analysis due to the Height of the Walker. Journal of the Korea Convergence Society, 6(2), 19-24. DOI : 10.15207/jkcs.2015.6.2.019
  3. D. H. Lee & J. U. Cho. (2018). Convergence Study on Damage of the Bonded Part at TDCB Structure with the Laminate Angle Manufactured with CFRP. Journal of the Korea Convergence Society, 9(12), 175-180. DOI : 10.15207/JKCS.2018.9.12.175
  4. J. H. Lee & J. U. Cho. (2015). Study on the Convergent Life Evaluation due to the Bumper Configuration of Multipurpose Vehicle. Journal of the Korea Convergence Society, 6(5), 85-90. DOI : 10.15207/JKCS.2015.6.5.085
  5. J. U. Cho. (2014). Analytical Study on Durability due to the Load of Artificial Knee Joint. Journal of the Korea Convergence Society, 5(2), 7-11. DOI : 10.15207/JKCS.2014.5.2.007
  6. J. W. Park, J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle. Journal of the Korea Convergence Society, 8(7), 231-236. DOI : 10.15207/JKCS.2017.8.7.231
  7. J. U. Cho. (2015). Study on Convergence Technique through Strength Analysis of Stabilizer Link by Type. Journal of the Korea Convergence Society, 6(1), 57-63. DOI : 10.15207/JKCS.2015.6.1.057
  8. Y. K. Park & B. G. Lee. (2018). A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining. Journal of the Korea Convergence Society, 9(5), 145-150. DOI : 10.15207/JKCS.2018.9.5.145
  9. J. W. Park. (2017). Structural Analysis of a Tractor Cabin Considering Structure Production Error. Journal of the Korea Convergence Society, 8(5), 155-160. DOI : 10.15207/JKCS.2017.8.5.155
  10. J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique through Structural Analysis due to the Height of the Walker. Journal of the Korea Convergence Society, 6(2), 19-24. DOI : 10.15207/jkcs.2015.6.2.019
  11. J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis. Journal of the Korea Convergence Society, 6(4), 99-105. DOI : 10.15207/jkcs.2015.6.4.099
  12. G. G. Choi. (2018). A Convergence Study through Durability Analysis due to the Configuration of Automotive Frame Butted. Journal of the Korea Convergence Society, 9(11), 271-276. DOI : 10.15207/JKCS.2018.9.11.271
  13. Y. T. Oh. (2017). Study on the Structural Analysis of SCARA Industrial Robot. Journal of the Korean Society of Mechanical Technology, 19(6), 866-871. DOI : 10.17958/ksmt.19.6.201712.866
  14. Y. S. Lee & Y. J. Yang. (2017). Study on Structural Analysis of Variable Roll Unit for Drawing Process of SUS Hexagonal Bar. Journal of the Korean Society of Mechanical Technology, 19(6), 827-833. DOI : 10.17958/ksmt.19.6.201712.827
  15. C. S. Yi, B. H. Lee & D. H. Chin. (2019). A Study on the Flow and Structural Analysis in an Air Conditioning Duct for Marine Offshore. Journal of the Korean Society of Manufacturing Process Engineers, 18(3), 88-93. DOI : 10.14775/ksmpe.2019.18.3.088
  16. I. S. Son, C. H. Kim, S. H. Bae & J. Y. Lee. (2015). Rescue Lift Development Using Structural Analysis. Journal of the Korean Society of Manufacturing Process Engineers, 14(1), 111-116. DOI : 10.14775/ksmpe.2015.14.1.111