한국전산구조공학회논문집 (Journal of the Computational Structural Engineering Institute of Korea)

  • 제33권3호
  • /
  • Pages.145-152
  • /
  • 2020
  • /
  • 1229-3059(pISSN)
  • /
  • 2287-2302(eISSN)
한국전산구조공학회 (Computational Structural Engineering Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

유한요소해석 기반 척추 고정분절 변화에 따른 척추 안정성 평가

Spinal Stability Evaluation According to the Change in the Spinal Fixation Segment Based on Finite Element Analysis

  • 김철정 (부산대학교 대학원 의공학전공) ;
  • 손승민 (양산부산대학교병원 정형외과) ;
  • 허진영 ((주)에스원바이오) ;
  • 이치승 (부산대학교 의과대학 융합의학교실)
  • Kim, Cheol-Jeong (Department of Biomedical Engineering, Graduate School, Pusan National Univ.) ;
  • Son, Seung Min (Department of Orthopaedic Surgery, Pusan National University Yangsan Hospital) ;
  • Heo, Jin-Young (S-ONE BIO CORP.) ;
  • Lee, Chi-Seung (Department of Convergence Medicine, School of Medicine, Pusan National Univ.)
  • 투고 : 2020.02.12
  • 심사 : 2020.02.17
  • 발행 : 2020.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 유한요소해석을 이용하여 흉요추 후방 고정술의 고정분절 변화에 따른 척추 안정성을 평가하였다. 이를 위해 추간판, 인대, 추간관절(Facet joint) 등을 포함한 정상 흉요추(T10-L4)의 유한요소모델을 구축하였으며, 문헌으로 보고된 재료물성치를 부여하였다. 한편, L1을 병변 부위로 가정하였으며, L1-L2, T12-L2, T12-L1-L2 총 3가지 종류의 후방 고정술을 흉요추 유한요소모델에 구현하고 전방 굽힘, 후방 굽힘, 측면 굽힘, 축 회전의 하중 조건을 부여하였다. 시리즈 유한요소해석을 통해 고정분절에 따른 척추경 나사못, 척추골, 추간판의 변형량, 등가 응력, 운동 범위, 모멘트를 계산하였으며, 그 결과를 바탕으로 척추 안정성을 평가하였다.

In this study, we evaluated spinal stability based on the change in the thoracolumbar fixation segment using finite element analysis (FEA). To accomplish this, a finite element (FE) model of a normal thoracolumbar spine (T10-L4), including intervertebral discs (IVD), ligaments, and facet joints, was constructed, and the material properties reported in previous studies were implemented. However, L1 was assumed as the lesion site, and three types of posterior fixation, namely, L1-L2, T12-L2, and T12-L1-L2, were implemented in the thoracolumbar FE model. In addition, the loading conditions for flexion, extension, lateral bending, and axial rotation were adopted. Through the series FEA, the deformation, equivalent stress, range of motion, and moment on the pedicle screws, vertebrae, and IVD were calculated, and the spinal stability was evaluated based on the FEA results.

키워드

참고문헌

  1. Ahn, M.W., Ahn, J.C., Lee, S.H., Chung, I.S., Lee, C.Y., Lee, J.W. (2003) Analysis of Compression Behavior on Intervertebral Disc L4-5 in Pedicle Screw System Instrumented Lumbar Spine under Follower Load, Yeungnam Univ. J. of Med., 20(2), pp.160-168. https://doi.org/10.12701/yujm.2003.20.2.160
  2. Crisco, J.J., Panjabi, M.M., Yamamoto, I., Oxland, T.R. (1992) Euler Stability of the Human Ligamentous Lumbar Spine, Part II: Experiment, Clin, Biomech., 7, pp.27-32. https://doi.org/10.1016/0268-0033(92)90004-N
  3. Dreischarf, M., Rohlmann, A., Bergmann, G., Zander, T. (2011) Optimised Loads for the Simulation of Axial Rotation in the Lumbar Spine, J. Biomech., 44, pp.2323-2327. https://doi.org/10.1016/j.jbiomech.2011.05.040
  4. Dreischarf, M., Rohlmann, A., Bergmann, G., Zander, T. (2012) Optimised in Vitro Applicable Loads for the Simulation of Lateral Bending in the Lumbar Spine, Med. Eng. & Phys., 34, pp.777-780. https://doi.org/10.1016/j.medengphy.2012.04.002
  5. Dreischarf, M., Zander, T., Shirazi-Adl, A., Puttlitz, C.M., Adam, C.J., Chen, C.S., Goel, V.K., Kiapour, A., Kim, Y.H., Labus, K.M., Little, J.P., Park, W.M., Wang, Y.H., Wilke, H.J., Rohlmann, A., Schmidt, H. (2014) Comparison of Eight Published Static Fnite Element Models of the Intact Lumbar Spine: Predictive Power of Models Improves When Combined Together, J. Biomech., 47, pp.1757-1766. https://doi.org/10.1016/j.jbiomech.2014.04.002
  6. Jindal, N., Sankhala, S.S., Bachhal, V. (2012) The Role of Fusion in the Management of Burst Fractures of the Thoracolumbar Spine Treated by Short Segment Pedicle Screw Fixation, J. Bone & Joint Surg., 94-B(8), pp.1101-1106. https://doi.org/10.1302/0301-620X.94B8.28311
  7. Kang, K.T., Lee, H.Y., Son, J.H., Chun, H.J., Kim, H.J. (2009) The Change in Range of Motion after Removal of Instrumentation in Lumbar Arthrodesis Stiffness of Fusion Mass: Finite Element Analysis, Proc. Comput. Struct. Eng. Inst. Conf., Computational Structural Engineering Institute of Korea, pp.283-286.
  8. Kim, W.J. (2009) Surgical Treatment of Osteoporotic Compression Fracture, J. Korean Fract. Soc., 22(4), pp.314-318. https://doi.org/10.12671/jkfs.2009.22.4.314
  9. Kim, H.M., Chang, B.S., Lee, C.K. (2016) Considerations for Surgical Treatment of Osteoporotic Spinal Fracture: Surgical Indication, Approach, Fixation, and Graft Material, J. Korean Soc. Spine Surg., 23, pp.41-53. https://doi.org/10.4184/jkss.2016.23.1.41
  10. Kim, Y.M., Kim, T.K., Shim, D.M., Lim, K.H. (2018) Treatment Options of Osteoporotic Vertebral Compression Fractures, J. Korean Fract. Soc., 1(3), pp.114-121.
  11. Kuo, C.S., Hu, H.T., Lin, R.M., Huang, K.Y., Lin, P.C., Zhong, Z.C., Hseih, M.L. (2010) Biomechanical Analysis of the Lumbar Spine on Facet Joint Force and Intradiscal Pressure - A Finite Element Study, BMC Musculoskeletal Disorders, 11:151. https://doi.org/10.1186/1471-2474-11-151
  12. Rohlmann, A., Zander, T., Rao, M., Bergmann, G. (2009) Realistic Loading Conditions for upper Body Bending, J. Biomech., 42, pp.884-890. https://doi.org/10.1016/j.jbiomech.2009.01.017
  13. Rohlmann, A., Neller, S., Claes, L., Bergmann, G., Wilke, H.J. (2001) Influence of a Follower Load on Intradiscal Pressure and Intersegmental Rotation of the Lumbar Spine, Spine, 26(24), pp.E557-E561. https://doi.org/10.1097/00007632-200112150-00014
  14. Shin, D.S., Lee, K.W., Kim, D. (2007) Biomechanical Study of Lumbar Spine with Dynamic Stabilization Device using Finite Element Method, Comput.-Aided Des., 39, pp.559-567. https://doi.org/10.1016/j.cad.2007.03.005
  15. Shin, J.K., Lim, B.Y., Goh, T.S., Son, S.M., Kim, H.S., Lee, J.S., Lee, C.S. (2018) Effect of the Screw Type (S2-Alar-Iliac and Iliac), Screw Length, and Screw Head Angle on the Risk of Screw and Adjacent Bone Failures After a Spinopelvic Fixation Technique: A Finite Element Analysis, PLoS ONE, 13(8).
  16. Tezeren, G., Kuru, I. (2005) Posterior Fixation of Thoracolumbar Burst Fracture: Short-Segment Pedicle Fixation Versus LongSegment Instrumentation, J. Spinal. Disord. Tech., 18(6), pp.485-488. https://doi.org/10.1097/01.bsd.0000149874.61397.38
  17. Yoon, G.S., Sohn, J.I., Kim, G.H., Seo, T.I. (2011) A Development and Estimation about Flexible Rod for Flexibility of Pedicle Scr ew System, J. Korea Acad.-Indus. Coop. Soc., 12(4), pp.1775-1780. https://doi.org/10.5762/KAIS.2011.12.4.1775
  18. Zhong, Z.C., Chen, S.H., Hung, C.H. (2009) Load-and Displacement-Controlled Finite Element Analyses on Fusion and Non-Fusion Spinal Implants, J. Eng. Med., 223(2), pp.143-157. https://doi.org/10.1243/09544119JEIM476