DOI QR코드

DOI QR Code

The effect of accidental eccentricities on the inelastic torsional response of buildings

  • Georgoussis, George K. (Department of Civil Engineering Educators, School of Pedagogical and Technological Education (ASPETE)) ;
  • Mamou, Anna (Department of Civil Engineering Educators, School of Pedagogical and Technological Education (ASPETE))
  • Received : 2019.09.24
  • Accepted : 2020.02.12
  • Published : 2020.07.25

Abstract

This paper investigates the influence of spatial varations of accidental mass eccentricities on the torsional response of inelastic multistorey reinforced concrete buildings. It complements recent studies on the elastic response of structural buildings and extends the investigation into the inelastic range, with the aim of providing guidelines for minimising the torsional response of structural buildings. Four spatial mass eccentricity configurations of common nine story buildings, along with their reversed mass eccentricities subjected to the Erzincan-1992 and Kobe-1995 ground motions were investigated, and the results are discussed in the context of the structural response of the no eccentricity models. It is demonstrated that when the initial linear response is practically translational, it is maintained into the inelastic phase of deformation as long as the strength assignment of the lateral resisting bents is based on a planar static analysis where the applied lateral loads simulate the first mode of vibration of the uncoupled structure.

Keywords

Acknowledgement

This work has been (co-)financed by the School of Pedagogical and Technological Education through the operational program "Research strengthening in ASPETE"-Project SSKK(80144)

References

  1. Anagnostopoulos, S.A., Kyrkos, M.T. and Stathopoulos, K.G. (2013), "Earthquake induced torsion in buildings: critical review and state of the art", World Congress on Advances in Structural Engineering and Mechanic, Jeju, Korea, September.
  2. Anagnostopoulos, S.A., Kyrkos, M.T. and Stathopoulos, K.G. (2015), "Earthquake induced torsion in buildings: critical review and state of the art", Earthq. Struct., 8(2), 305-377. http://dx.doi.org/10.12989/eas.2015.8.2.305.
  3. Aziminejad, A., Moghadam, A.S. and Tso, W.K. (2008), "A new methodology for designing multi-story asymmetric buildings", The 14th World Conference on Earthquake Engineering, Beijing, China, October.
  4. Aziminejad, A. and Moghadam, A.S. (2009), "Performance of asymmetric multistory buildings with different strength distributions", J. Appl. Sci., 9(6), 1082-1089. https://doi.org/10.3923/jas.2009.1082.1089.
  5. Basu, D., Constantinou, M.C. and Whittaker, A.S. (2014), "An equivalent accidental eccentricity to account for the effects of torsional ground motion on structures", Eng. Struct., 69, 1-11. https://doi.org/10.1016/j.engstruct.2014.02.038.
  6. Chandler, A.M. and Hutchison, G.L. (1986), "Torsional coupling effects in the earthquake response of asymmetric buildings", Eng. Struct., 8(4), 222-236. https://doi.org/10.1016/0141-0296(86)90030-1.
  7. Chandler, A.M., Duan, X.N. and Rutenberg, A. (1996), "Seismic torsional response: assumptions, controversies and research progress", Eur. Earthq. Eng., 10(1), 37-51.
  8. De-La-Llera, J.C. and Chopra, A.K. (1994a), "Using accidental eccentricity in code specified static and dynamic analyses of buildings", Earthq. Eng. Struct. Dynam., 23(9), 947-967. https://doi.org/10.1002/eqe.4290230903.
  9. De La Llera, J.C. and Chopra, A.K. (1994b), "Accidental torsion in buildings due to base rotational excitation", Earthq. Eng. Struct. Dyn., 23(9), 1003-1021. https://doi.org/10.1002/eqe.4290230906.
  10. De-La-Llera, J.C. and Chopra, A.K. (1994c), "Accidental torsion in buildings due to stiffness uncertainties", Earthq. Eng. Struct. Dyn.,23(2), 117-136. https://doi.org/10.1002/eqe.4290230202.
  11. De-La-Llera, J.C. and Chopra, A.K. (1995), "Estimation of accidental torsion effects for seismic design of buildings", J. Struct. Eng., 121(1),102-114. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:1(102).
  12. De-La-Colina, J., Gonzalez, J.V. and Perez, C.A.G. (2013), "Experiments to study the effects of foundation rotation on the seismic building torsional response of a reinforced concrete space frame", Eng. Struct., 56, 1154-1163. https://doi.org/10.1016/j.engstruct.2013.06.005.
  13. De Stefano, M. and Pintucchi, B. (2008), "A review of research on seismic behaviour of irr egular building structures since 2002", Bullet. Earthq. Eng., 6(2), 285-308. https://doi.org/10.1007/s10518-007-9052-3.
  14. Eurocode (2004), Design of structures for earthquake resistancepart 1: general rules, seismic actions and rules for buildings. European Committee for Standardization; Brussels, Belgium.
  15. Falamarz-Sheikhabadi, M.R. and Ghafory-Ashtiany, M. (2012), "Approximate formulas for rotational effects in earthquake engineering", J. Seismol., 16(4), 815-827. https://doi.org/10.1007/s10950-012-9273-z.
  16. Georgoussis, G.K. (2010), "Modal rigidity center: its use for assessing elastic torsion in asymmetric buildings", Earthq. Struct., 1(2), 163-175. https://doi.org/10.12989/eas.2010.1.2.163.
  17. Georgoussis, G.K. (2014), "Modified seismic analysis of multistory asymmetric elastic buildings and suggestions for minimizing the rotational response", Earthq. Struct., 7(1), 39-52. https://doi.org/10.12989/eas.2014.7.1.039.
  18. Georgoussis, G.K. (2015), "Minimizing the torsional response of inelastic multistory buildings with simple eccentricity", Can. J. Civil Eng., 42(11), 966-969. https://doi.org/10.1139/cjce-2015-0091.
  19. Georgoussis, G.K. (2016), "An approach for minimum rotational response of medium-rise asymmetric structures under seismic excitations", Adv. Struct. Eng., 19(3), 420-436. https://doi.org/10.1177/1369433216630049.
  20. Georgoussis, G.K. (2018), "Locating optimum torsion axis in asymmetric buildings subjected to seismic excitation", P. I. Civil Eng - Str.B., 171(9), 688-695. https://doi.org/10.1680/jstbu.17.00068.
  21. Georgoussis, G.K., Mamou, A. and Kyrkos, M.T. (2019), "The influence of spatial variations of mass eccentricities on the earthquake induced torsion in buildings", Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, September.
  22. Georgoussis, G.K. and Mamou, A. (2018), "The effect of mass eccentricity on the torsional response of building structures", Struct. Eng. Mech., 67(6), 671-682. https://doi.org/10.12989/sem.2018.67.6.671.
  23. Lucchini, A., Monti, D. and Kunnath, S. (2009), "Seismic behavior of single-story asymmetric-plan buildings under uniaxial excitation", Earthq. Eng. Struct. Dynam., 38(9), 1053-1070. https://doi.org/10.1002/eqe.881
  24. Myslimaj, B. and Tso, W.K. (2002), "A strength distribution criterion for minimizing torsional response of asymmetric walltypesystems", Earthq. Eng. Struct. Dynam., 31(1), 99-120. https://doi.org/10.1002/eqe.100.
  25. Myslimaj, B. and Tso, W.K. (2004), "Desirable strength distribution for asymmetric structures with strength-stiffness dependent elements", J. Earthq. Eng., 8(2), 231-248. https://doi.org/10.1080/13632460409350488.
  26. Paulay, T. (1998), "A Mechanism-based design strategy for the torsional seismic response of ductile buildings", Eur. Earthq. Eng., 2, 33-48.
  27. Paulay, T. (2001), "Some design principles relevant to torsional phenomena in ductile buildings", J. Earthq. Eng., 5(3), 271-308. https://doi.org/10.1080/13632460109350395.
  28. Rutenberg, A. (1998), "Behaviour of irregular and complex structures - state of the art report: seismic nonlinear response of code-designed asymmetric structures", 11th European Conference on Earthquake Engineering, Balkema, Rotterdam. September.
  29. Shakib, H. and Tohid, R.Z. (2002), "Evaluation of accidental eccentricity in buildings due to rotational component of earthquake", J. Earthq. Eng., 6(4), 431-445. https://doi.org/10.1080/13632460209350424.
  30. Shakib, H. and Atefatdoost, G.R. (2014), "Minimizing the torsional response of asymmetric wall-type systems considering soil-structure interaction", Int. J. Civil Eng., 12(1), 14-24.
  31. Falamarz-Sheikhabadi, M.R. (2014), "Simplified relations for the application of rotational components to seismic design codes", Eng. Struct., 59, 141-152. https://doi.org/10.1016/j.engstruct.2013.10.035.
  32. Stathopoulos, K.G. and Anagnostopoulos, S.A. (2003), "Inelastic earthquake response of single-story asymmetric buildings: an assessment of simplified shear beam models", Earthq. Eng. Struct. Dyn., 32(12), 1813-1831. https://doi.org/10.1002/eqe.302.
  33. Stathopoulos, K.G. and Anagnostopoulos, S.A. (2005), "Inelastic torsion of multistorey buildings under earthquake excitations", Earthq. Eng. Struct. Dyn., 34(12), 1449-1465. https://doi.org/10.1002/eqe.486.
  34. Stathopoulos, K.G. and Anagnostopoulos, S.A. (2010), "Accidental design eccentricity: Is it important for the inelastic response of buildings to strong earthquakes?", Soil Dyn. Earthq. Eng., 30(9),782-797. https://doi.org/10.1016/j.soildyn.2009.12.018.
  35. Stathi, C.G., Bakas, N.P., Lagaros, N.D. and Papadrakakis, M. (2015), "Ratio of Torsion (ROT): An index for assessing the global induced torsion in plan irregular buildings", Earthq. Struct., 9(1), 145-171. https://doi.org/10.12989/eas.2015.9.1.145.
  36. Tso, W.K. and Myslimaj, B. (2003), "A yield displacement distribution-based approach for strength assignment to lateral force resisting elements having strength dependent stiffness", Earthq. Eng. Struct. Dyn., 32(15), 2319-2351. https://doi.org/10.1002/eqe.328.