DOI QR코드

DOI QR Code

Study on stiffness deterioration in steel-concrete composite beams under fatigue loading

  • Wang, Bing (School of Civil and Environmental Engineering, Ningbo University) ;
  • Huang, Qiao (School of Transportation, Southeast University) ;
  • Liu, Xiaoling (Faculty of Maritime and Transportation, Ningbo University) ;
  • Ding, Yong (School of Civil and Environmental Engineering, Ningbo University)
  • Received : 2019.07.29
  • Accepted : 2019.10.21
  • Published : 2020.02.25

Abstract

The purpose of this paper is to investigate the degradation law of stiffness of steel-concrete composite beams after certain fatigue loads. First, six test beams with stud connectors were designed and fabricated for static and fatigue tests. The resultant failure modes under different fatigue loading cycles were compared. And an analysis was performed for the variations in the load-deflection curves, residual deflections and relative slips of the composite beams during fatigue loading. Then, the correlations among the stiffness degradation of each test beam, the residual deflection and relative slip growth during the fatigue test were investigated, in order to clarify the primary reasons for the stiffness degradation of the composite beams. Finally, based on the stiffness degradation function under fatigue loading, a calculation model for the residual stiffness of composite beams in response to fatigue loading cycles was established by parameter fitting. The results show that the stiffness of composite beams undergoes irreversible degradation under fatigue loading. And stiffness degradation is associated with the macrobehavior of material fatigue damage and shear connection degradation. In addition, the stiffness degradation of the composite beams exhibit S-shaped monotonic decreasing trends with fatigue cycles. The general agreement between the calculation model and experiment shows good applicability of the proposed model for specific beam size and fatigue load parameters. Moreover, the research results provide a method for establishing a stiffness degradation model for composite beams after fatigue loading.

Keywords

Acknowledgement

The research described in this paper was financially supported by the Natural Science Foundation of Zhejiang Province (No.LQ19E080006) and National Natural Science Foundation of China (No. 51808301). This work was also sponsored by Fund of National Engineering and Research Center for Mountainous Highways (No.GSGZJ-2019-04).

References

  1. Adasooriya, N.D. and Siriwardane, S.C. (2014), "Remaining fatigue life estimation of corroded bridge members", Fatigue Fract. Eng. Mater. Struct., 37(6), 603-622. https://doi.org/10.1111/ffe.12144.
  2. Amiri, A., Cavalli, M.N. and Ulven, C.A. (2017), "A new approach of stiffness degradation modeling for carbon fiberreinforced polymers under cyclic fully reversed bending", J. Compos. Mater., 51(20), 2889-2897. https://doi.org/10.1177/0021998317690239.
  3. British Standards Institution (2005), Eurocode 4: Design of Composite Structures - Part 1.2 General rules and rules for bridges, BS EN 1994-1-2, BSI, London, UK.
  4. Chen, C.C., and Sudibyo, T. (2019), "Behavior of partially concrete encased steel beams under cyclic loading", Int. J. Steel Struct., 19(1), 255-268. https://doi.org/10.1007/s13296-018-0114-y.
  5. Cheng, L. (2011), "Flexural fatigue analysis of a CFRP form reinforced concrete bridge deck", Compos. Struct., 93(11), 2895-2902. https://doi.org/10.1016/j.compstruct.2011.05.014.
  6. Deng, W., Xiong, Y., Liu, D. and Zhang, J. (2019), "Static and fatigue behavior of shear connectors for a steel-concrete composite girder", J. Constr. Steel Res., 159, 134-146. https://doi.org/10.1016/j.jcsr.2019.04.031.
  7. Esendemir, U. (2006), "The effects of shear on the deflection of simply supported composite beam loaded linearly", J. Reinf. Plast. Compos., 25(8), 835-846. https://doi.org/10.1177/0731684406065133.
  8. Focacci, F., Foraboschi, P. and Stefano, M.D. (2015), "Composite beam generally connected: analytical model", Compos. Struct., 133(12), 1237-1248. https://doi.org/10.1016/j.compstruct.2015.07.044.
  9. Foraboschi, P. (2016a), "Effectiveness of novel methods to increase the FRP-masonry bond capacity", Compos. Part B: Eng., 107(12), 214-232. https://doi.org/10.1016/j.compositesb.2016.09.060.
  10. Foraboschi, P. (2014), "Three-layered plate: Elasticity solution", Composites Part B: Engineering, 60(4), 764-776. https://doi.org/10.1016/j.compositesb.2013.06.037.
  11. Foraboschi, P. (2016b), "Versatility of steel in correcting construction deficiencies and in seismic retrofitting of RC buildings", J. Build. Eng., 8(12), 107-122. https://doi.org/10.1016/j.jobe.2016.10.003.
  12. Gao, D.Y. and Zhang, M. (2013), "Calculation method for stiffness of steel fiber reinforced high-strength concrete beams based on effective moment of inertia", China J. Highway Transport, 26(5), 62-68. https://doi.org/10.19721/j.cnki.1001-7372.2013.05.009. [In Chinese]
  13. Girhammar, U.A. (2009), "A simplified analysis method for composite beams with interlayer slip", Int. J. Mech. Sci., 51(7), 515-530. https://doi.org/10.1016/j.ijmecsci.2009.05.003.
  14. Hanswille, G. and Porsch, M. (2014), "Lifetime oriented design concepts of steel-concrete composite structures subjected to fatigue loading", Proceedings of the 2008 Composite Construction in Steel and Concrete Conference VI, Tabernash, CO, USA, July.
  15. Hanswille, G., Porsch, M. and Ustundag, C. (2007), "Resistance of headed studs subjected to fatigue loading: Part I: Experimental study", J. Constr. Steel Res., 63(4), 475-484. https://doi.org/10.1016/j.jcsr.2006.06.035.
  16. Hu, S.W. and Zhao, K.Y. (2013), "Experimental research on torsional performance of prestressed composite box beam with partial shear connection", Appl. Mech. Mater., 438-439, 658-662. https://doi.org/10.4028/www.scientific.net/AMM.438-439.658.
  17. Huang, Y., Wei, J. and Dong, R. (2019), "Stiffness of corroded partially prestressed concrete T-beams under fatigue loading", Mag. Concr. Res., 1-14. https://doi.org/10.1680/jmacr.18.00187.
  18. Kwon, K. and Dan, M.F. (2010), "Bridge fatigue reliability assessment using probability density functions of equivalent stress range based on field monitoring data", Int. J. Fatigue, 32(8), 1221-1232. https://doi.org/10.1016/j.ijfatigue.2010.01.002.
  19. Lin, Z., Liu, Y. and Roeder, C.W. (2016), "Behavior of stud connections between concrete slabs and steel girders under transverse bending moment", Eng. Struct., 117, 130-144. https://doi.org/10.1016/j.engstruct.2016.03.014.
  20. Liu, F., Zhou, J. and Yan, L. (2018), "Study of stiffness and bearing capacity degradation of reinforced concrete beams under constant-amplitude fatigue", Plos One, 13(3), e0192797. https://doi.org/10.1371/journal.pone.0192797.
  21. Runnian, Y. and Demin, W. (2013), "A study on the residual fatigue strain and damage of steel fiber reinforced recycled concrete under constant amplitude flexural fatigue loading", J. Test. Eval., 41(3), 465-470. https://doi.org/10.1520/JTE20120135.
  22. Sjaarda, M., Porter, T., West, J.S. and Walbridge, S. (2017), "Fatigue behavior of welded shear studs in precast composite beams", J. Bridge Eng., 22(11), 04017089. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001134.
  23. Song, A., Wan, S., Jiang, Z. and Xu, J. (2018), "Residual deflection analysis in negative moment regions of steelconcrete composite beams under fatigue loading", Constr. Build. Mater., 158, 50-60. https://doi.org/10.1016/j.conbuildmat.2017.09.075.
  24. Wang, B., Huang, Q. and Liu, X. (2017), "Deterioration in strength of studs based on two-parameter fatigue failure criterion", Steel Compos. Struct., 23(2), 239-250. https://doi.org/10.12989/scs.2017.23.2.239.
  25. Yan, J. B. , Xiong, M.X. , Qian, X. and Liew, J.Y.R. (2016), "Numerical and parametric study of curved steel-concrete-steel sandwich composite beams under concentrated loading", Mater. Struct., 49(10), 3981-4001. https://doi.org/10.1617/s11527-015-0768-2.
  26. Yang, T., Lin, G. and Peng, X. (2016), "Experimental study on fatigue behavior of steel-precast concrete slab composite beams with partial shear connection", J. Wuhan Univ. Technol., 38(1):54-58. [in Chinese]
  27. Yatim, M.Y.M., Shanmugam, N.E. and Badaruzzaman, W.H.W. (2013), "Behaviour of partially connected composite plate girders containing web openings", Thin-Wall. Struct., 72(10), 102-112. https://doi.org/10.1016/j.tws.2013.06.022.
  28. Zhou, C., Chen, Z., Shi, S.Q. and Cai, L. (2018), "Behavior of concrete columns confined with both steel angles and spiral hoops under axial compression", Steel Compos. Struct., 27(6), 747-759. https://doi.org/10.12989/scs.2018.27.6.747.
  29. Zhou, M., Liu, Z., Zhang, J., An, L. and He, Z. (2016), "Equivalent computational models and deflection calculation methods of box girders with corrugated steel webs", Eng. Struct., 127, 615-634. https://doi.org/10.1016/j.engstruct.2016.08.047.
  30. Zhu H., Zhao Y. and Li X. (2014), "Reinforced concrete beam's stiffness degeneration regulation and its calculation formula under the action of fatigue load", J. Civil, Architect. Environ. Eng., 36(2):1-13. [In Chinese]

Cited by

  1. EXPERIMENTAL STUDY ON THE DYNAMIC BEHAVIOR OF RUBBER CONCRETE UNDER COMPRESSION CONSIDERING EARTHQUAKE MAGNITUDE STRAIN RATE vol.26, pp.8, 2020, https://doi.org/10.3846/jcem.2020.13728