DOI QR코드

DOI QR Code

Prediction and analysis of structural noise of a box girder using hybrid FE-SEA method

  • Luo, Wen-jun (MOE Engineering Research Center of Railway Environment Vibration and Noise, East China Jiaotong University) ;
  • Zhang, Zi-zheng (MOE Engineering Research Center of Railway Environment Vibration and Noise, East China Jiaotong University) ;
  • Wu, Bao-you (China Railway Electrification Engineering Group Company Limited) ;
  • Xu, Chang-jie (MOE Engineering Research Center of Railway Environment Vibration and Noise, East China Jiaotong University) ;
  • Yang, Peng-qi (JSTI Group Company Limited)
  • Received : 2020.01.02
  • Accepted : 2020.02.22
  • Published : 2020.08.25

Abstract

With the rapid development of rail transit, rail transit noise needs to be paid more and more attention. In order to accurately and effectively analyze the characteristics of low-frequency noise, a prediction model of vibration of box girder was established based on the hybrid FE-SEA method. When the train speed is 140 km/h, 200 km/h and 250 km/h, the vibration and noise of the box girder induced by the vertical wheel-rail interaction in the frequency range of 20-500 Hz are analyzed. Detailed analysis of the energy level, sound pressure contribution, modal analysis and vibration loss power of each slab at the operating speed of 140 km /h. The results show that: (1) When the train runs at a speed of 140km/h, the roof contributes more to the sound pressure at the far sound field point. Analyzing the frequency range from 20 to 500 Hz: The top plate plays a very important role in controlling sound pressure, contributing up to 70% of the sound pressure at peak frequencies. (2) When the train is traveling at various speeds, the maximum amplitude of structural vibration and noise generated by the viaduct occurs at 50 Hz. The vibration acceleration of the box beam at the far field point and near field point is mainly concentrated in the frequency range of 31.5-100 Hz, which is consistent with the dominant frequency band of wheel-rail force. Therefore, the main frequency of reducing the vibration and noise of the box beam is 31.5-100 Hz. (3) The vibration energy level and sound pressure level of the box bridge at different speeds are basically the same. The laws of vibration energy and sound pressure follow the rules below: web

Keywords

Acknowledgement

This research is supported by the National Natural Science Foundation (51768022, 51978265), Jiangxi Provincial Science and Technology Innovation Team Construction Plan (20181BCB24011), Jiangxi Provincial Academic and Technical Leader Training Program (20194BCJ22009), and the National Science Fund for Distinguished Young Scholars (51725802), to which the authors are very grateful.

References

  1. Bengtsson, J., Persson, W.K. and Kjellberg A. (2003), "Evaluations of effects due to low-frequency noise in a low demanding work situation", J. Sound Vib., 278, 83-99. https://doi.org/10.1016/j.jsv.2003.09.061.
  2. Chen, S.M., Wang, D.F. and Zan, J.M. (2011). "Interior noise prediction of the automobile based on hybrid FE-SEA Method", Math. Problems in Eng., https://doi.org/10.1155/2011/327170.
  3. Cui, R., Gao, L. and Cai, X. (2015), "Research on damping and noise reduction characteristics of high-speed railway damping rails", J. China Railway Soc.., 37(02), 78-84. https://doi.org/10.3969/j.issn.1001-8360.2015.02.012.
  4. Fang, X., Gu, A. and Wu, J. (2013), "Analysis of vibration transfer characteristics of simple supported box girder bridges", Urban Rapid Rail Transit., 26(03), 84-88. https://doi.org/10.3969/j.issn.1672-6073.2013.03.022.
  5. Gao, R., Zhang, Y. and Kennedy, D. (2020), "Application of the dynamic condensation approach to the hybrid FE-SEA model of mid-frequency vibration in complex built-up systems", Comput. Struct., 228. https://doi.org/10.1016/j.compstruc.2019.106156.
  6. Han, J., Wu, D. and Li, Q. (2012), "Influence of deck thickness and stiffeners on structure-borne noise of the trough beams", J. Vib. Eng., 2012(5), 589-594. https://doi.org/10.16385/j.cnki.issn.1004-4523.2012.05.003.
  7. Langley, R. and Cordioli, A. (2009), "Hybrid deterministic-statistical analysis of vibro-acoustic systems with domain couplings on statistical components", J. Sound Vib., 321(3-5), 893-912. https://doi.org/10.1016/j.jsv.2008.10.007.
  8. Langley, R.S. and Cordioli, J.A. (2009), "Hybrid deterministic-statistical analysis of vibroacoustic systems with domain couplings on statistical components", J. Sound Vib., 321(3-5), 893-912. https://doi.org/10.1016/j.jsv.2008.10.007.
  9. Lei, X. and Sheng, X. (2004), Railway Traffic Noise and Vibration, Science Press, Beijing, China.
  10. Li, J., Zhang, N. and Zhang, L. (2012), "Numerical simulation of vibration and structural noise of elevated bridges", Environ. Eng., S1, 156-160. https://doi.org/10.13205/j.hjgc.2012.s1.008.
  11. Li, X., Zhang, X., Liu, Q., Zhang, Z. and Li, Y. (2013), "Study on the full band predictio of bridge structure noise in high speed railway (I): theoretical model", J. China Railway Soc., 35(1), 101-107. https://doi.org/10.3969/j.issn.1001-8360.2013.01.016.
  12. Liu, L., Fu, Q., Shao, W. and Li, J. (2015), "Analysis of panel acoustic contribution to box bridge structure", J. Railway Sci. Eng., 12(04), 743-748. https://doi.org/10.19713/j.cnki.43-1423/u.2015.04.005.
  13. Liu, Q., Thompson, D., Xu, P., Feng, Q. and Li, X (2020), "Investigation of train-induced vibration and noise from a steel-concrete composite railway bridge using a hybrid finite element-statistical energy analysis method", J. Sound Vib., 471, 115-197. https://doi.org/10.1016/j.jsv.2020.115197.
  14. Luo, W. and Cheng, L. (2016), "Vibration and noise analysis of single track U-Beam in urban rail transit", J. Railway Eng., 34 (05), 89-93. https://doi.org/10.3969/j.issn.1006-2106.2017.05.016.
  15. Luo, W. and Cheng, L. (2018), "Prediction and Analysis of Structural Noise from a U-beam Using the FE-SEA Hybrid Method", Prome-Traffic Transport., 30(3), 333-342. https://doi.org/10.7307/ptt.v30i3.2721.
  16. Luo, W. and Zhang, X. (2015), "Finite element analysis of local vibration of high speed railway viaduct", Noise Vib. Control, 34(06), 148-152. https://doi.org/10.3969/j.issn.1006-2106.2015.11.011.
  17. Luo, W., Yang, P. and Zhang, Z. (2019), "Prediction and Analysis of Structural Noise of Box Girder Based on FE-SEA Hybrid Method", J. China Railway Soc., 08, 100-107. https://doi.org/10.3969/j.issn.1001-8360.2019.08.013.
  18. Luo, Y., Tang, J. and Lin, P. (2017), "Experimental analysis of noise radiation characteristics directly underneath an elevated box girder of subway", Sichuan Environ., 36(03), 101-105. https://doi.org/10.14034/j.cnki.schj.2017.03.016.
  19. Ouelaa, N., Rezaiguia, A. and Laulagnet, B. (2005), "Vibro-acoustic modelling of a railway bridge crossed by a train", Appl. Acoustics., 67(5), 461-475. https://doi.org/10.1016/j.apacoust.2005.07.005.
  20. Ross, Z., Kheirbek, I., Clougherty, J.E., Ito, K., Matte, T., Markowitz, S. and Eisl, H. (2011), "Noise, air pollutants and traffic: continuous measurement and correlation at a high-traffic location in New York City", Environ. Res.., 2011(111), 1054-1063. https://doi.org/10.1016/j.envres.2011.09.004.
  21. Schulte-Warning, B., Beier, M., Degen, K.G. and Stiebel, D. (2005), "Research on noise and vibration reduction at DB to improve the environmental friendliness of railway traffic", J. Sound Vib., 293, 1058-1069. https://doi.org/10.1016/j.jsv.2005.08.065.
  22. Shorter, P.J. and Langley, R.S. (2005), "Vibro-acoustic analysis of complex systems", J. Sound Vib., 288(3), 669-699. https://doi.org/10.1016/j.jsv.2005.07.010.
  23. Song, X., Li, Q. and Wu, D. (2018), "Prediction of Low-to-medium Frequency Structure-borne Noise Radiated from Rail Transit Concrete Bridges", J. China Railway Soc., 03, 126-131. https://doi.org/10.3969/j.issn.1001-8360.2018.03.019.
  24. Song, X., Wu, D. and Li, Q. (2015), "A 2.5-dimensional infinite element based method for the prediction of structure-borne low-frequency noise from concrete rail transit bridges", J. Vib. Eng., 6, 929-936. https://doi.org/10.16385/j.cnki.issn.1004-4523.2015.06.010.
  25. Song, X., Wu, D. and Li, Q. (2015), "A 2.5-dimensional infinite element based method for the prediction of structure-borne low-frequency noise from concrete rail transit bridges", J. Vib. Eng., 6, 929-936. https://doi.org/10.16385/j.cnki.issn.1004-4523.2015.06.010.
  26. Thompson, D. (2009), Railway Noise and Vibration: Mechanisms, Modeling and Means of Control, Elsevier, United Kingdom.
  27. Wang X., Zhang, N. and Qi, S. (2014), "Study on vibration and noise radiation of urban rail transit bridge", Railway Construct., 2014(1), 11-15. https://doi.org/10.3969/j.issn.1003-1995.2014.01.04.
  28. Zhang, X. and Li, X. (2015), "Study on the effect of fastener stiffness and damping on vibration and noise of railway box girder", Vib. Shock., 15, 150-155. https://doi.org/10.13465/j.cnki.jvs.2015.15.027.
  29. Zhang, X., Zhang, J. and Li, X. (2015), "Beam plate hybrid element analysis of vibration and noise induced by bridge vehicle", Noise Vib. Control, 35(01), 89-92+109. https://doi.org/10.3969/j.issn.1006-1335.2015.01.018.
  30. Zhang, X., Zhang, J. and Li, X. (2016), "Modified FE-SEA model to predict low frequency noise of box girders and test verification", J. Vib. Eng., 29(02), 237-245. https://doi.org/10.16385/j.cnki.issn.1004-4523.2016.02.007.