DOI QR코드

DOI QR Code

Effect of macro and micro fiber volume on the flexural performance of hybrid fiber reinforced SCC

  • Turk, Kazim (Department of Civil Engineering, Engineering Faculty, Inonu University) ;
  • Kina, Ceren (Department of Civil Engineering, Faculty of Engineering and Natural Sciences, Malatya Turgut Ozal University) ;
  • Oztekin, Erol (Organized Industry Region Vocational High School, Construction Technology Program, Inonu University)
  • 투고 : 2020.06.17
  • 심사 : 2020.08.21
  • 발행 : 2020.09.25

초록

The aim of this study is to investigate the flexural performance of hybrid fiber reinforced self-compacting concrete (HFRSCC) having different ratio of micro and macro steel fiber. A total of five mixtures are prepared. In all mixtures, the sum of the steel fiber content is 1% and also water/binder ratio is kept constant. The amount of high range water reducer admixture (HRWRA) is arranged to satisfy the workability criteria of self-compacting concrete. Four-point bending test is carried out to analyze the flexural performance of the mixtures at 28 and 56 curing days. From the obtained load-deflection curves, the load carrying capacity, deflection and toughness values are investigated according to ASTM C1609, ASTM C1018 and JSCE standards. The mixtures containing higher ratio of macro steel fiber exhibit numerous micro-cracks and, thus, deflection-hardening response is observed. The mixture containing 1% micro steel fiber shows worst performance in the view of all flexural parameters. An improvement is observed in the aspect of toughness and load carrying capacity as the macro steel fiber content increases. The test results based on the standards are also compared taking account of abovementioned standards.

키워드

참고문헌

  1. ASTM C1018-97 (1997), Standard Test Methods for Flexural Toughness and First Crack Strength of Fibre Reinforced Concrete, Book of ASTM Standards, West Conshohocken, PA.
  2. ASTM C1609/C1609M-12 (2012), Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading), West Conshohocken. PA.
  3. Banthia, N. and Trottier, J.F. (1995), "Test methods for flexural toughness characterization of fiber reinforced concrete: some concerns and a proposition", ACI Mater. J., 92(1), 1-10. https://doi.org/10.14359/1176.
  4. Benson, S.D.P. and Karihaloo, B.L. (2005), "CARDIFRC- development and mechanical properties. Part I: development and workability", Mag. Concrete Res., 57(6), 347-352. https://doi.org/10.1680/macr.2005.57.6.347.
  5. Committee, J.D. (2003), "DFRCC terminology and application concepts", J. Adv. Concrete Technol., 1(3), 335-340. https://doi.org/10.3151/jact.1.335.
  6. Felekoglu, B., Tosun, K. and Baradan, B. (2009), "Effects of fibre type and matrix structure on the mechanical performance of self-compacting micro-concrete composites", Cement Concrete Res., 39(11), 1023-1032. https://doi.org/10.1016/j.cemconres.2009.07.007.
  7. Gesoglu, M., Guneyisi, E., Muhyaddin, G.F. and Asaad, D.S. (2016), "Strain Hardening ultra-high performance fiber reinforced cementitious composites: Effect of fiber type and concentration", Compos. Part B, 103, 74-83. https://doi.org/10.1016/j.compositesb.2016.08.004.
  8. Ghanem, H. and Obeid, Y. (2015), "The effect of steel fibers on the rhyological and mechanical properties of self compacting concrete", Eur. Scientif. J., 11(21), 85-98. https://doi.org/10.11648/j.ajce.20130103.14.
  9. Gopalaratnam, S., Shah, S.P., Batson, G.B., Criswell, M.E., Ramakrishnam, V. and Wecharatana, M. (1991), "Fracture toughness of fiber reinforced concrete", ACI Mater. J., 88(4), 339-353.
  10. Haddadou, N., Chaid, R., Ghernouti, Y. and Adjou, N. (2014), "The effect of hybrid steel fiber on the properties of fresh and hardened self-compacting concrete", J. Build. Mater. Struct., 1, 65-76. https://doi.org/10.5281/zenodo.241964.
  11. Hannant, D.J., Hughes, D.C., Kelly, A., Alford, N.M. and Bailey, J.E. (1983), "Toughening of cement and other brittle solids with fibres", Philos. T. Roy. Soc. A, 310(1511), 175-190. https://doi.org/10.1098/rsta.1983.0076.
  12. Johnston, C.D. (2001), Fiber-Reinforced Cements and Concretes, Gordon and Breach Science Publishers, Singapore.
  13. JSCE (1984), Method of Test for Flexural Strength and Flexural Toughness of Fibre Reinforced Concrete, JSCE Standard SF-4.
  14. Kim, D.J., Naaman, A.E. and El-Tawil, S. (2008), "Comparative flexural behavior of four fiber reinforced cementitious composites", Cement Concrete Compos., 30(10), 917-928. https://doi.org/10.1016/j.cemconcomp.2008.08.002.
  15. Kim, D.J., Park, S.H., Ryu, G.S. and Koh, K. (2011), "Comparative flexural behavior of hybrid ultra high performance fiber reinforced concrete with different macro fibers", Constr. Build. Mater., 25, 4144-4155. https://doi.org/10.1016/j.conbuildmat.2011.04.051.
  16. Kovacs, I. and Balazs, G.L. (2004), Structural Performance of Steel Fibre Reinforced Concrete, Publishing Company of Budapest University of Technology and Economics, Budapest.
  17. Lawler, J.S., Zampini, D. and Shah, S.P. (2005), "Microfiber and macrofiber hybrid fiber-reinforced concrete", J. Mater. Civil Eng., 17, 595-604. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:5(595).
  18. Li, J.J., Wan, C.J., Niu, J.G., Wu, L.F. and Wu, Y.C. (2017), "Investigation on flexural toughness evaluation method of steel fiber reinforced lightweight aggregate concrete", Constr. Build. Mater., 131, 449-458. https://doi.org/10.1016/j.conbuildmat.2016.11.101.
  19. Li, V.C. (1993), "From micromechanics to structural engineering - the design of cementitious composites for civil engineering applications", Struct. Eng/ Earthq. Eng., 10(2), 32-48.
  20. Naaman, A.E. (2002), "Toughness, ductility surface energy and deflection-hardening FRC composites", Proceedings of JCI Workshop on Ductile Fiber Reinforced Cementitious Composites (DFRCC) - Application and Evaluation, Tokyo, Japan.
  21. Naaman, A.E. and Reinhardt, H.W. (1995), "Characterization of high performance fiber reinforced cement composites (HPFRCC2)", Proc., Second International Workshop, Ann Arbor, USA.
  22. Naaman, A.E. and Reinhardt, H.W. (2006), "Proposed classification of HPFRC composites based on their tensile response", Mater. Struct., 39(5), 547-555. https://doi.org/10.1617/s11527-006-9103-2.
  23. Nataraja, M.C., Dhang, N. and Gupta, A.P. (2000), "Toughness characterization of steel fiberreinforced concrete by JSCE approach", Cement Concrete Res., 30, 593-597. https://doi.org/10.1016/S0008-8846(00)00212-X.
  24. Pajak M. and Ponikiewski T. (2013), "Flexural behavior of self-compacting concrete reinforced with different types of steel fibers", Constr. Build. Mater., 47, 397-408. https://doi.org/10.1016/j.conbuildmat.2013.05.072.
  25. Park, S.H., Kim, D.J., Ryu, G.S. and Koh, K.T. (2012), "Tensile behavior of ultra high performance hybrid fiber reinforced concrete", Cement Concrete Compos., 34(2), 172-184. https://doi.org/10.1016/j.cemconcomp.2011.09.009.
  26. Rashiddadash P., Ramezanianpour, A.A. and Mahdikhani, M. (2014), "Experimental investigation on flexural toughness of hybrid fiber reinforced concrete (HFRC) containing metakaolin and pumice", Constr. Build. Mater., 51, 313-320. https://doi.org/10.1016/j.conbuildmat.2013.10.087.
  27. Rossi, P., Antonio, A., Parant, E. and Fakhri, P. (2005), "Bending and compressive behaviors of a new cement composite", Cement Concrete Res., 35(1), 27-33. https://doi.org/10.1016/j.cemconres.2004.05.043.
  28. Sahmaran, M. and Yaman, I.O. (2007), "Hybrid fiber reinforced self compacting concrete with a high volume coarse fly ash", Constr. Build. Mater., 21(1), 150-156. https://doi.org/10.1016/j.conbuildmat.2005.06.032.
  29. Shah, S.P., Brandt, A.M., Ouyang, C., Baggott, R., Eibl, J. and Glinicki, M.A. (1995), "Toughness Characterization and Toughening Mechanisms", Proc. Second International RILEM Workshop, E&FN SPON, Ann Arbor, USA.
  30. Sharma, R. and Bansal, P.P. (2019), "Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete", Adv. Concrete Constr., 8(1), 21-31. https://doi.org/10.12989/acc.2019.8.1.021.
  31. Sivakumar, A. and Santhanam, M. (2007), "Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibers", Cement Concrete Compos., 29(8), 603-608. https://doi.org/10.1016/j.cemconcomp.2007.03.006.
  32. Wang, J.Y., Banthia, N. and Zhang, M.H. (2012), "Effect of shrinkage reducing admixture on flexural behaviors of fiber reinforced cementitious composites", Cement Concrete Compos., 34, 443-450. https://doi.org/10.1016/j.cemconcomp.2011.12.004.
  33. Wu, Z., Shi, C., He, W. and Wu, L. (2016), "Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete", Constr. Build. Mater., 103, 8-14. https://doi.org/10.1016/j.conbuildmat.2015.11.028.
  34. Yao, W., Li, J. and Wu, K. (2003), "Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction", Cement Concrete Res., 33(1), 27-30. https://doi.org/10.1016/S0008-8846(02)00913-4.
  35. Yoo, D.Y., Kang, S.T. and Banthia, N. (2017), "Nonlinear finite element analysis of ultra-high-performance fiber-reinforced concrete beams", Int. J. Damage Mech., 26(5), 735-757. https://doi.org/10.1177/1056789515612559.
  36. Yoo, D.Y., Kang, S.T. and Yoon, Y.S. (2016), "Enhancing the flexural performance of ultra-high-performance concrete using long steel fibers", Compos. Struct., 147, 220-230. https://doi.org/10.1016/j.compstruct.2016.03.032.
  37. Yu, R., Spiesz, P. and Brouwers, H.J.H. (2015), "Development of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC): Towards an efficient utilization of binders and fibres", Constr. Build. Mater., 79, 273-282. https://doi.org/10.1016/j.conbuildmat.2015.01.050.
  38. Zollo, R.F. (1997), "Fiber-reinforced concrete: an overview after 30 years of development", Cement Concrete Compos., 19(2), 107-122. https://doi.org/10.1016/S0958-9465(96)00046-7.