DOI QR코드

DOI QR Code

Optimal aerodynamic design of hypersonic inlets by using streamline-tracing techniques

  • Xiong, Bing (College of Aerospace Science and Engineering, National University of Defense Technology) ;
  • Ferlauto, Michele (Department of Mechanical and Aerospace Engineering, Politecnico di Torino) ;
  • Fan, Xiaoqiang (College of Aerospace Science and Engineering, National University of Defense Technology)
  • 투고 : 2020.01.10
  • 심사 : 2020.04.06
  • 발행 : 2020.09.25

초록

Rectangular-to-Ellipse Shape Transition (REST) inlets are a class of inward turning inlets designed for hypersonic flight. The aerodynamic design of REST inlets involves very complex flows and shock-wave patterns. These inlets are used in highly integrated propulsive systems. Often the design of these inlets may require many geometrical constraints at different cross-section. In present work a design approach for hypersonic inward-turning inlets, adapted for REST inlets, is coupled with a multi-objective optimization procedure. The automated procedure iterates on the parametric representation and on the numerical solution of a base flow from which the REST inlet is generated by using streamline tracing and shape transition algorithms. The typical design problem of optimizing the total pressure recovery and mass flow capture of the inlet is solved by the proposed procedure. The accuracy of the optimal solutions found is discussed and the performances of the designed REST inlets are investigated by means of fully 3-D Euler and 3-D RANS analyses.

키워드

과제정보

The authors gratefully acknowledge the support of the NSFC (No. 11572347 and 11872071) and the China Scholarship Council (CSC). Computational resources were provided by hpc@polito.it, a project of Academic Computing within the Department of Control and Computer Engineering at the Politecnico di Torino.

참고문헌

  1. Anderson, J. (1982), Modern Compressible Flow with Historical Perspective, McGraw-Hill,New York, USA.
  2. Barger, R.L. (1981), "A procedure for designing forebodies with constraints on cross-section shape and axial area distribution", Scientific and Technical Information Branch, Hampton, USA.
  3. Billig, F., Baurle, R. and Tam, C. (1999), "Design and analysis of streamline traced hypersonic inlets",9th Int. Space Planes and Hypersonic Syst. & Technol. Conf., Norfolk, VA. https://doi.org/10.2514/6.1999-4974
  4. Busemann, A. (1942), "Die Achsenssymmetrische Kegelizeuber-Schallstromung", Luftfahrtforschung, 19, 137-144.
  5. Cui, K., Hu, S., Li, G., Qu, Z. and Situ, M. (2013), "Conceptual design and aerodynamic evaluation of hypersonic airplane with double flanking air inlets", Sci. China Technol. Sc., 56, 1980-1988. https://doi.org/10.1007/s11431-013-5288-0
  6. Deb, K., Pratap, A., Agarwal, S. and Meyarivan, T. (2002), "A fast and elitist multiobjective genetic algorithm: NSGA-II", IEEE Trans. Evol. Comp., 6(2), 182-197. https://doi.org/10.1109/4235.996017
  7. Degregori, E. and Ferlauto, M. (2018), "Optimal aerodynamic design of scramjet facility nozzles", AIP Conf. Proc., 1978(1), 470114. https://doi.org/10.1063/1.5048596
  8. Ding, F., Liu, J., Huang, W., Peng, C. and Chen, S. (2019), "An airframe/inlet integrated fullwaverider vehicle design using as upgraded aerodynamic method", Aeronaut. J., 123(1266), 1135-1169. https://doi.org/10.1017/aer.2019.49
  9. Drayna, T.W., Nompelis, I. and Candler, G. (2006), "Hypersonic inward turning inlets: design and optimization", AIAA Paper 2006-297, 44th AIAA Aerosp. Sci. Meeting & Exhibit, Reno, NV. https://doi.org/10.2514/6.2006-297
  10. Ferlauto, M. (2013), "Inverse design of internally cooled turbine blades based on the heat adjoint equation.", Inverse Probl. Sci. En., 21(2), 269-282. https://doi.org/10.1080/17415977.2012.693079
  11. Ferlauto, M. (2015), "A pseudo-compressibility method for solving inverse problems based on the 3D incompressible Euler equations.", Inverse Probl. Sci. En., 23(5), 798-817. https://doi.org/10.1080/17415977.2014.939653
  12. Ferlauto, M. and Marsilio, R. (2014), "A computational approach to the simulation of controlled flows by synthetic jets actuators.", Adv. Aircraft Spacecraft Sci, 2(1), 77-94. https://doi.org/10.12989/aas.2015.2.1.077
  13. Ferlauto, M. and Marsilio, R. (2016), "A numerical method for the study of fluidic thrust vectoring", Adv. Aircraft Spacecraft Sci, 3(4), 367-378. https://doi.org/10.12989/aas.2016.3.4.367
  14. Ferlauto, M. and Marsilio, R. (2018), "Numerical simulation of the unsteady flowfield in complete propulsion systems", Adv. Aircraft Spacecraft Sci, 5(3), 349-362. https://dx.doi.org/10.12989/aas.2018.5.3.349
  15. Gollan, R. and Smart, M. (2013), "Design of modular shape-transition inlets for a conical hypersonic vehicle", J. Propul. Pow., 29(4), 832-838. https://doi.org/10.2514/1.B34672
  16. Hornung, H. (2000), "Oblique shock reflection from an axis of symmetry", J. Fluid Mech., 409, 1-12. https://doi.org/10.1017/S0022112099007831
  17. Iollo, A., Ferlauto, M. and Zannetti, L. (2001), "An aerodynamic optimization method based on the inverse problem adjoint equations", J. Comput. Phys., 173, 87-115. https://doi.org/10.1006/jcph.2001.6845
  18. Kothari, A., Tarpley, C. and McLaughlin, T. (1996), "Hypersonic vehicle design using inward turning flow fields", AIAA Paper 1996-2552, 32nd Joint Propul. Conf., Buena Vista, FL. https://doi.org/10.2514/6.1996-2552
  19. Kuranov, A. and Korabelnikov, A. (2008), "Atmospheric cruise flight challenges for hypersonic vehicles under the AJAX concept", J. Propul. Pow., 24(6), 1229-1247. https://doi.org/10.2514/1.24684
  20. Liu, J., Ding, F., Huang, W. and Jin, L. (2014), "Novel approach for designing a hypersonic glidingcruising dual waverider vehicle", Acta Astronaut., 102, 81-88. https://doi.org/10.1016/j.actaastro.2014.04.024
  21. Molder, S. and Szpiro, E. (1966), "Busemann inlet for hypersonic speeds", J.Spacecraft Rockets, 3(8), 1303-1304. https://doi.org/10.2514/3.28649
  22. Poinsot, T. and Lele, S. (1992), "Boundary conditions for direct simulations of compressible viscous reacting flows", J. Comput. Phys., 101, 104-129. https://doi.org/10.1016/0021-9991(92)90046-2
  23. Ramasubramanian, V., Starkey, R. and Lewis, M. (2008), "An Euler numerical study of Busemann and quasi-Busemann hypersonic inlets at on- and off-design speeds", AIAA Paper 2008-66, 46th AIAA Aerosp. Sci. Meeting & Exhibit, Reno, NV. https://doi.org/10.2514/6.2008-66
  24. Smart, M. (1999), "Design of three-dimensional hypersonic inlets with rectangular-to-elliptical shape transition", J. Propul. Pow., 15(3), 408-416. https://doi.org/10.2514/2.5459
  25. Smart, M.K. (2001), "Experimental testing of a hypersonic inlet with rectangular-to-elliptical shape transition", J. Propul. Pow., 17(2), 276-283. https://doi.org/10.2514/2.5774
  26. Wang, C., Tian, X. and Yan, L. (2015), "Preliminary integrated design of hypersonic vehicle configurations including inward-turning inlets", J. Aerospace Eng., 28, 04014143. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000480
  27. Wang, J., Cai, J., Duan, T. and Tian, Y. (2017), "Design of shape morphing hypersonic inwardturning inlet using multistage optimization", Aerospace Sci. Technol., 66, 44-58. https://doi.org/10.1016/j.ast.2017.02.018
  28. Xiong, B., Fan, X. and Wang, Y. (2019a), "Parameterization and optimization design of a hypersonic inward turning inlet", Acta Astronaut., 164, 130-141. https://doi.org/10.1016/j.actaastro.2019.07.004
  29. Xiong, B., Ferlauto, M. and Fan, X. (2019b), "Parametric generation and computational analysis of a REST inlet", 5th ECCOMAS Young Investig. Conf. (YIC2019), Krakow, Poland.
  30. You, Y. (2011), "An overview of the advantages and concerns of hypersonic inward turning inlets", AIAA Paper 2011-2269 17th AIAA Int. Space Planes and Hypersonic Syst. and Techol. Conf., San Francisco, USA. https://doi.org/10.2514/6.2011-2269