Journal of Korean Society for Quality Management (품질경영학회지)

Korean Society for Quality Management (한국품질경영학회)
권호 표지
DOI QR코드

DOI QR Code

Optimum Design of the Heating Equipment by Influence of Wind Speed at Cryogenic Temperature

극저온에서 풍속의 영향에 따른 발열기자재의 최적설계

  • Cho, Hyun Jun (Korea Marine Equipment Research Institute) ;
  • Yun, Won Young (Department of Industrial Engineering, Pusan National University)
  • 조현준 ((재)한국조선해양기자재연구원) ;
  • 윤원영 (부산대학교 산업공학과)
  • Received : 2020.08.04
  • Accepted : 2020.08.30
  • Published : 2020.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: The purpose of this study is to evaluate the performance of heating equipments by implementing the extreme environment in which ships navigating the ice zone are exposed and to study and apply the experimental method to infer the optimized design for each factors. Methods: It is required to verify by analysis and experiment how the environment with low temperature and wind speed implemented through the test facility affects the heating walk-way and The optimum design of the heating walk-way in that extreme environment is derived using the Taguchi technique. Results: The results of this study are as follows; It was found the effect on the condition of each factor and derive optimized conditions that satisfy the performance condition of the heating walk-way in extreme use environment. Conclusion: Ships operating in Polar waters require reliable and durable facilities for all environments during sailing.

Keywords

References

  1. AMCA (AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC.). 2016. ANSI/AMCA Standard 500-L-07 Laboratory Methods of Testing Louvers for Rating.
  2. Bureau Veritas. 2015. Pt E, Ch10, Section 11 Cold Weather Condition.
  3. Det Norske Veritas. 2013. DNV-OS-A201 Winterization for Cold Climate Operations (Tentative).
  4. E-TEC. 2016. Heated Walk Way (10XTV2/12Lines, 10XTV2/20Lines) Test Report.
  5. International Electronical Commission. 2001. IEC 60068-3-5 Environmental Testing - Part 3-5: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature Chambers.
  6. International Electronical Commission. 2017. IEC 60068-2-1 Environmental Testing - Part 2-1: Tests - Test A: Cold.
  7. International Organization for Standardization. 2014. ISO/DIS 18215 Ships and Marine Technology - Vessel Machinery Operations in Polar Waters - Guidelines.
  8. International Organization for Standardization. 2017. ISO 17713-1 Meteorology - Wind Measurements - Part 1: Wind Tunnel Test Methods for Rotating Anemometer Performance.
  9. Ji, Suyun and Jang, Jungsun. 2015. Fan Case Design using Energy Conversion Ideal Function Based Taguchi Dynamic Characteristics. Journal of the Korean Institute of Industrial Engineers 41(1):97-104. https://doi.org/10.7232/JKIIE.2015.41.1.097
  10. Kim, Donghyun. 2016. Analysis of Low Temperature Performance Heat Transfer of Deck Equipment and Materials for Ice Ships. Korea Maritime & Ocean University.
  11. Kim, Sungjun. 2013. A Review on the Taguchi Method and Its Alternatives for Dynamic Robust Design Taguchi's Robust Design is a Method for Quality Improve. Journal of the Korean Institute of Industrial Engineers 39(5):351-360. https://doi.org/10.7232/JKIIE.2013.39.5.351
  12. Korean Industrial Standards. 2006. KS P 8202 Anemometer for General Use.
  13. Korean Industrial Standards. 2008. KS I ISO 16622 Meteorology - Sonic Anemometers/Thermometers - Acceptance Test Methods for Mean wind Measurements.
  14. Korean Industrial Standards. 2014. KS V 0940 TestingPprocedure for Deck Equipments of Vessel Intended for Cold Climate Region.
  15. Kwon, Hyukmu. 2013. Case Studies on Strengths and Weaknesses of Taguchi Method Taguchi Method is a Technique Widely Used in Industries to Attain a Reliable. Journal of the Korean Institute of Industrial Engineers 39(5):383-392. https://doi.org/10.7232/JKIIE.2013.39.5.383
  16. Lloyd's Register. 2015. Provisional Rules for Winterization of Ships.
  17. Oh, Suyoun. 2016. A Case Study of Performance Test for Anti-icing Deck Equipment in Arctic Marine Plant and Polar Class Vessel. The Okhotsk Sea & Cold Ocean Research Association.
  18. Sin, Hyuk. 2007. A Study on Optimal Process Condition of the Solid Contents for the Color Filter Using the Taguchi Methods. Korea University of Technology & Education:9-11.
  19. SMACNA (SHEET METAL & AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION). 2002. HVAC SYSTEMS Testing, Adjusting & Balancing, Third Edition.
  20. Taguchi Kenichi. 1991. Experimental Planning Method for Quality Design, Korea Industry Standards Association.
  21. Taguchi Kenichi. 1991. Quality Engineering in Development and Design Phase. Korea Industry Standards Association.
  22. THERMON. 2015. Electric Heat Tracing Maintenance and Troubleshooting Guide.
  23. Yeom, Bongjin. 2013. Robust Design, Taguchi Method, Performance Measure, Signal-to-Noise Ratio. Journal of the Korean Institute of Industrial Engineers 39(5):325-341. https://doi.org/10.7232/JKIIE.2013.39.5.325