DOI QR코드

DOI QR Code

Analysis of Combustion Instabilities in a 2-stage Duct System using Transfer Functions

전달함수를 이용한 2단 덕트 시스템에서의 연소불안정 해석

  • 김선영 (강릉원주대학교 기계공학과) ;
  • 김대식 (강릉원주대학교 기계공학과)
  • Received : 2021.10.05
  • Accepted : 2021.11.24
  • Published : 2021.12.31

Abstract

In this paper, using a transfer function-based analytical model, major factors influencing the acoustics and combustion instability in a two-stage duct system composed of a nozzle and a combustor were derived and their quantitative effects were evaluated. From the acoustic analysis, it was confirmed that the change in reflection coefficient and mean flow could have a great influence on the instability growth rate, and the area ratio and speed of sound ratio between the nozzle and the combustor are also key parameters to determine combustion instability as well as flame transfer functions.

Keywords

Acknowledgement

이 논문은 2021년도 정부(산업통상자원부)의 재원으로 한국에너지기술평가원의 지원을 받아 수행된 연구임(20217010100030, 표준 가스복합발전용 주기기 설계 및 제작 기술 개발).

References

  1. T. Lieuwen and V. Yang, "Combustion Instabilities in Gas Turbine Engines," Progress in Astronautics and Aeronautics, Washington, DC, AIAA, Vol. 210, 2005.
  2. M. Yoon, D. Kim, "Acoustic Transfer Function of a Combustion System with Premixing Chamber," Journal of Mechanical Science and Technology, Vol. 31, No. 12, 2017, pp. 6069~6076. https://doi.org/10.1007/s12206-017-1151-8
  3. M. Yoon, "Effects of Mean Flow, Temperature Ratio and Area Ratio on Combustion Instability of a Dump Combustor," Combustion Science and Technology, 2019.
  4. J. Kim, M. Yoon and D. Kim, "Combustion Stability Analysis using Feedback Transfer Function," Journal of The Korean Society Combustion, Vol. 21, 2016, pp. 24~31. https://doi.org/10.15231/JKSC.2016.21.3.024
  5. J. Y. Chung and D. A. Blaser, "Transfer function method of measuring in-duct acoustic properties," The Journal of the Acoustical Society of America, Vol. 68, No. 3, 1980, pp. 907~913. https://doi.org/10.1121/1.384778
  6. Y. Pyo, J. Kim and D. Kim, "Time Lag Analysis Using Phase of Flame Transfer Function," Journal of ILASS-Korea, Vol. 21, No. 2, 2016, pp. 104~110. https://doi.org/10.15435/JILASSKR.2016.21.2.104
  7. F. Lacombe and Y. Mery, "Mixed Acoustic-Entropy Combustion Instabilities in a Model Aeronautical Combustor: Large Eddy Simulation and Reduced Order Modeling," Journal of Engineering for Gas Turbines and Power, Vol. 140, No. 3, 2018, 031506. https://doi.org/10.1115/1.4037960
  8. Y. Pyo, D. Kim, S.K. Kim and D. J. Cha, "Numerical investigation on combustion instability modeling in a lean premixed gas turbine combustor combining finite element analysis with local flame transfer function," Journal of Mechanical Science and Technology, Vol. 33, 2019, pp. 5547~5559. https://doi.org/10.1007/s12206-019-1048-9
  9. S. K. Kim, D. Kim and D. J. Cha, "Finite Element Analysis of Self-Excited Instabilities in a Lean Premixed Gas Turbine Combustor," International Journal of Heat and Mass Transfer, Vol. 120, 2018, pp. 350~360. https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.021
  10. X. Han, J. Li and A. S. Morgans, "Prediction of Combustion Instability Limit Cycle Oscillations by Combining Flame Describing Function Simulations with a Thermoacoustic Network Model," Combustion and Flame, Vol. 162, 2015, pp. 3632~3647. https://doi.org/10.1016/j.combustflame.2015.06.020
  11. S. Jang, D. Kim, S. Joo and Y. Yoon, "Combustion Instability Modeling in a Partially-Premixed Gas Turbine Combustor using Finite Element Method," Jorunal of ILASS-Korea, Vol. 23, No. 1, 2018, pp. 16~21.
  12. S. Kim and D. Kim, "Acoustic Transfer Function in a Multi-duct System and Its Application of Closed-loop Instability Analysis," Journal of Propulsion and Energy, Vol. 1, No. 1, 2020, pp. 57~65.
  13. http://www.oscilos.com/
  14. L. Crocco, "Aspects of Combustion Stability in Liquid Propellant Rocket Motors Part I: Fundamentals, Low Frequency Instability With Monopropellants," Journal of the American Rocket Society, Vol. 21, No. 6, 1951, pp. 163~178. https://doi.org/10.2514/8.4393