DOI QR코드

DOI QR Code

Axial impact behavior of confined concrete filled square steel tubes using fiber reinforced polymer

  • Zhang, Yitian (Hunan Construction Engineering Group Co., Ltd.) ;
  • Shan, Bo (Ministry of Education Key Laboratory of Building Safety and Energy Efficiency, Hunan University) ;
  • Kang, Thomas H.K. (Department of Architecture and Architectural Engineering, Seoul National University) ;
  • Xiao, Yan (Zhejiang University - University of Illinois Joint Institute, Zhejiang University)
  • Received : 2019.08.15
  • Accepted : 2021.01.12
  • Published : 2021.01.25

Abstract

Existing research on confined concrete filled steel tubular (CCFT) columns has been mainly focused on static or cyclic loading. In this paper, square section CCFT and CFT columns were tested under both static and impact loading, using a 10,000 kN capacity compression test machine and a drop weight testing equipment. Research parameters included bonded and unbonded fiber reinforced polymer (FRP) wraps, with carbon, basalt and glass FRPs (or CFRP, BFRP, and GFRP), respectively. Time history curves for impact force and steel strain observed are discussed in detail. Experimental results show that the failure modes of specimens under impact testing were characterized by local buckling of the steel tube and cracking at the corners, for both CCFT and CFT columns, similar to those under static loading. For both static and impact loading, the FRP wraps could improve the behavior and increase the loading capacity. To analyze the dynamic behavior of the composite columns, a finite element, FE, model was established in LS-DYNA. A simplified method that is compared favorably with test results is also proposed to predict the impact load capacity of square CCFT columns.

Keywords

Acknowledgement

The research reported in this article was carried out under the support of the National Natural Science Foundation Key Project (NSFC 51438010), Hunan Provincial Natural Science Foundation of China (2019JJ50093) and the Distinguished Professorship from Zhejiang University International Campus. Helps provided by the staffs of the Ministry of Education Key Laboratory of Building Safety and Energy Efficiency are warmly appreciated.

References

  1. Alam, M.I., Fawzia, S., Zhao, X.L., Remennikov, A.M., Bambach, M.R. and Elchalakani, M. (2017), "Performance and dynamic behaviour of frp strengthened cfst members subjected to lateral impact", Eng. Struct., 147, 160-176, https://doi.org/10.1016/j.engstruct.2017.05.052.
  2. Anderson, D. (2014), Eurocode 4 - design of composite steel and concrete structures, Springer Berlin Heidelberg.
  3. Aslani, F., Uy, B., Wang, Z.W. and Patel, V. (2016), "Confinement models for high strength short square and rectangular concrete-filled steel tubular columns", Steel Compos. Struct., 22(5), 937-974, https://doi.org/10.12989/scs.2016.22.5.937.
  4. ASTM (2000), "Standard test method for tensile properties of polymer matrix composite material", ASTM D3039 West Conshohocken, PA.
  5. Beton (1991), "Ceb-fip model code 1990".
  6. Briaud, J.L. and Hunt, B.E. (2006). "Bridge scour and the structural engineer", Structure December,
  7. Chen, C., Zhao, Y.H. and Li, J. (2015), "Experimental investigation on the impact performance of concrete-filled frp steel tubes", J. Eng. Mech., 141(2), 11. https://doi.org/10.1061/(asce)em.1943-7889.0000833.
  8. Cowper, G.R. and Symonds, P.S. (1957), "Strain hardening and strain rate effect in the impact loading of cantilever beams", Small Business Economics, 31(3), 235-263. https://doi.org/10.1007/s11187-008-9136-8
  9. Deogekar, P.S. and Andrawes, B. (2018), "Hybrid confinement of high strength concrete using shape memory alloys and fiber-reinforced polymers", J. Struct. Integrity Maint., 3(1), 22-32. https://doi.org/10.1080/24705314.2018.1426172
  10. Hallquist, J. (2003), "Ls-dyna keyword user's manual, version: 970".
  11. Han, L.H., Hou, C. and Wang, Q.L. (2012), "Square concrete filled steel tubular (cfst) members under loading and chloride corrosion: Experiments", J. Constr. Steel Res., 71, 11-25. https://doi.org/10.1016/j.jcsr.2011.11.012
  12. Hong, J.K. and Kang, T.H.K. (2018), "Computing in protection engineering: Cfd analysis of blade fragment impact on concrete wall", J. Struct.Integrity Maint., 3(4), 210-216. https://doi.org/10.1080/24705314.2018.1534429
  13. Hu, H.T., Huang, C.S., Wu, M.H. and Wu, Y.M. (2003), "Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect", J. Struct. Eng. - ASCE, 129(10), 1322-1329. https://doi.org/10.1016/(asce)0733-9445(2003)129:10(1322).
  14. Huo, J., Zheng, Q., Chen, B. and Xiao, Y. (2009), "Tests on impact behaviour of micro-concrete-filled steel tubes at elevated temperatures up to 400℃", Mater. Struct., 42(10), 1325. https://doi.org/10.1617/s11527-008-9452-0
  15. Kanishchev, R. and Kvocak, V. (2019), "Local buckling of rectangular steel tubes filled with concrete", Steel Compos. Struct., 31(2), 201-216. https://doi.org/10.12989/scs.2019.31.2.201.
  16. Lam, L. and Teng, J.G. (2003), "Design-oriented stress-strain model for frp-confined concrete", Constr. Build. Mater., 17(6-7), 471-489. https://doi.org/10.1016/s0950-0618(03)00045-x.
  17. Mao, X.Y. and Xiao, Y. (2006), "Seismic behavior of confined square cft columns", Eng. Struct., 28(10), 1378-1386. https://doi.org/10.1016/j.engstruct.2006.01.015
  18. Mirmomeni, M., Heidarpour, A., Zhao, X.L., Al-Mahaidi, R. and Packer, J.A. (2017), "Size-dependency of concrete-filled steel tubes subject to impact loading", Int. J. Impact Eng., 100, 90-101. https://doi.org/10.1016/j.ijimpeng.2016.11.003.
  19. Mohan, S.B. and Sharma, S. (2011), "Status of bridge failures in the united states (1800-2009)", Proc., Transportation Research Board 90th Annual Meeting.
  20. Murray, Y.D., Abuodeh, A.Y. and Bligh, R.P. (2007), "Evaluation of ls-dyna concrete material model 159", Concrete,
  21. Mutalib, A.A. and Hao, H. (2011), "Development of p-i diagrams for frp strengthened rc columns", Int. J. Impact Eng., 38(5), 290-304. https://doi.org/10.1016/j.ijimpeng.2010.10.029.
  22. Pham, T.M. and Hao, H. (2017), "Axial impact resistance of frp-confined concrete", J. Compos. Constr., 21(2), https://doi.org/10.1061/(asce)cc.1943-5614.0000744.
  23. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng., 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  24. Shan, J.H. and Chen, R. (2007), "Behavior of concrete filled tubes and confined concrete filled tubes under high speed impact", Adv. Struct. Eng., 10(2), 209-218. https://doi.org/10.1260/136943307780429725.
  25. Singh, N.K., Cadoni, E., Singha, M.K. and Gupta, N.K. (2013), "Dynamic tensile and compressive behaviors of mild steel at wide range of strain rates", J. Eng. Mech. - ASCE, 139(9), 1197-1206. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000557
  26. Singh, N.K., Cadoni, E., Singha, M.K. and Gupta, N.K. (2013), "Dynamic tensile and compressive behaviors of mild steel at wide range of strain rates", J. Eng. Mech., 139(9), 1197-1206. https://doi.org/10.1061/(asce)em.1943-7889.0000557.
  27. Tao, Z., Uy, B., Liao, F.Y. and Han, L.H. (2011), "Nonlinear analysis of concrete-filled square stainless steel stub columns under axial compression", J. Constr.Steel Res., 67(11), 1719-1732. https://doi.org/10.1016/j.jcsr.2011.04.012
  28. Teng, J.G., Yu, T., Wong, Y.L. and Dong, S.L. (2007), "Hybrid frp-concrete-steel tubular columns: Concept and behavior", Constr. Build. Mater., 21(4), 846-854. https://doi.org/10.1016/j.conbuildmat.2006.06.017.
  29. Tomii, M., Yoshimura, K. and Morishita, Y. (1977), "Experimental studies on concrete filled steel tubular stub columns under concentric loading", Proc., International Colloquium on Stability of Structures Under Static & Dynamic Loads, March.
  30. Varma, A.H., Ricles, J.M. and Sause, R. (2004), "Seismic behavior and design of high-strength square concrete-filled steel tube beam columns", J. Struct. Eng., 130(2), 169-179. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(169)
  31. Varma, A.H., Ricles, J.M., Sause, R. and Lu, L.W. (2002), "Experimental behavior of high strength square concrete-filled steel tube beam-columns", J. Struct. Eng., 128(3), 309-318. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:3(309)
  32. Wang, Z.B., Tao, Z., Han, L.H., Uy, B., Lam, D. and Kang, W.H. (2017), "Strength, stiffness and ductility of concrete-filled steel columns under axial compression", Eng. Struct., 135, 209-221. https://doi.org/10.1016/j.engstruct.2016.12.049.
  33. Wardhana, K. and Hadipriono, F.C. (2003), "Analysis of recent bridge failures in the united states", J. Perform. Constr. Fac., 17(3), 124-135,
  34. Wei, Y.Y. and Wu, Y.F. (2012), "Unified stress-strain model of concrete for frp-confined columns", Constr. Build. Mater., 26(1), 381-392. https://doi.org/10.1016/j.conbuildmat.2011.06.037.
  35. Xiao, Y. and He, W.H. (2005), "Confined concrete-filled tubular columns", J. Struct. Eng. - ASCE, 131(3), 488-497. https://doi.org/10.1061/((asce)0733-9445(2005)133:3(488).
  36. Xiao, Y., Shan, J., Zheng, Q., Chen, B. and Shen, Y. (2009), "Experimental studies on concrete filled steel tubes under high strain rate loading", J. Mater. Civil Eng., 21(10), 569-577. https://doi.org/10.1061/(asce)0899-1561(2009)21:10(569).
  37. Xiao, Y. and Shen, Y.L. (2012), "Impact behaviors of cft and cfrp confined cft stub columns", J. Compos. Constr., 16(6), 662-670. https://doi.org/10.1061/(asce)cc.1943-5614.0000294.
  38. Youssef, M.N., Feng, M.Q. and Mosallam, A.S. (2007), "Stressstrain model for concrete confined by frp composites", Compos. Part B - Eng., 38(5-6), 614-628, https://doi.org/10.1016/j.compositesb.2006.07.020.
  39. Zeng, J.J., Lin, G., Teng, J.G. and Li, L.J. (2018), "Behavior-of large-scale frp-confined rectangular rc columns under axial compression", Eng. Struct., 174, 629-645. https://doi.org/10.1016/j.engstruct.2018.07.086.
  40. Zhang, T., Ding, F.X., Wang, L.P., Liu, X.M. and Jiang, G.S. (2018). "Behavior of polygonal concrete-filled steel tubular stub columns under axial loading", Steel Compos. Struct., 28(5), 573-588. https://doi.org/10.12989/scs.2018.28.5.573..
  41. Zhang, Y.T., Shan, B. and Xiao, Y. (2019), "Axial impact behaviors of stub concrete-filled square steel tubes", Adv. Struct. Eng., 22(11), 2490-2503. https://doi.org/10.1177/1369433219845094.