Acknowledgement
This work was supported by the National Research Foundation of Korea(NRF) grant funded by the Korea government(MSIT) (No. 2021R1I1A3047664).
References
- Takeda T., Kunitomi K., Horie T., and Iwata K., 1997, "Feasibility study on the applicability of a diffusion-welded compact intermediate heat exchanger to next-generation high temperature gas-cooled reactor," Nuclear engineering and design, Vol. 168 (1-3), pp. 11-21. https://doi.org/10.1016/S0029-5493(96)01361-1
- Bai J., Pan J., He X., Wang K., Tang L., and Yang R., 2020, "Numerical investigation on thermal hydraulic performance of supercritical LNG in sinusoidal wavy channel based printed circuit vaporizer," Applied Thermal Engineering, Vol. 175, pp. 115379. https://doi.org/10.1016/j.applthermaleng.2020.115379
- Baik S., Kim S. G., Lee J., and Lee J. I., 2017, "Study on CO2-water printed circuit heat exchanger performance operating under various CO2 phases for S-CO2 power cycle application," Applied Thermal Engineering, Vol. 113, pp. 1536-1546. https://doi.org/10.1016/j.applthermaleng.2016.11.132
- Hinze J. F., Nellis G. F., and Anderson M. H., 2017, "Cost comparison of printed circuit heat exchanger to low cost periodic flow regenerator for use as recuperator in a s-CO2 Brayton cycle," Applied energy, Vol. 208, pp. 1150-1161. https://doi.org/10.1016/j.apenergy.2017.09.037
- Kim I. H., and No H. C., 2013, "Thermal-hydraulic physical models for a printed circuit heat exchanger covering He, He-CO2 mixture, and water fluids using experimental data and CFD," Experimental thermal and fluid science, Vol. 48, pp. 213-221. https://doi.org/10.1016/j.expthermflusci.2013.03.003
- Barclay M., and Denton N., 2005, "Selecting offshore LNG processes." LNG journal, Vol. 10 (1), pp. 34-36.
- Aneesh A., Sharma A., Srivastava A., Vyas K., and Chaudhuri P., 2016, "Thermal-hydraulic characteristics and performance of 3D straight channel based printed circuit heat exchanger," Applied Thermal Engineering, Vol. 98, pp. 474-482. https://doi.org/10.1016/j.applthermaleng.2015.12.046
- Xu H., Duan C., Ding H., Li W., Zhang Y., Hong G., and Gong H., 2021, "The optimization for the straight-channel PCHE size for supercritical CO2 Brayton cycle," Nuclear Engineering and Technology, Vol. 53 (6), pp. 1786-1795. https://doi.org/10.1016/j.net.2020.12.002
- Kim I. H., and No H. C., 2012, "Physical model development and optimal design of PCHE for intermediate heat exchangers in HTGRs," Nuclear Engineering and Design, Vol. 243, pp. 243-250. https://doi.org/10.1016/j.nucengdes.2011.11.020
- Pan J., Wang J., Tang L., Bai J., Li R., Lu Y., and Wu G., 2020, "Numerical investigation on thermal-hydraulic performance of a printed circuit LNG vaporizer," Applied Thermal Engineering, Vol. 165, pp. 114447. https://doi.org/10.1016/j.applthermaleng.2019.114447
- Fan J., and Yeom E., 2022, "Numerical investigation on thermal hydraulic performance of supercritical LNG in PCHEs with straight, zigzag, and sinusoidal channels," Journal of Visualization, in press.
- Zhang P., Ma T., Ke H., Wang W., Lin Y., and Wang Q., 2019, "Numerical investigation on local thermal characteristics of printed circuit heat exchanger for natural gas liquefication," Energy Procedia, Vol. 158, pp. 5408-5413. https://doi.org/10.1016/j.egypro.2019.01.622
- Tang L. H., Yang B. H., Pan J., and Sunden B., 2021, "Thermal performance analysis in a zigzag channel printed circuit heat exchanger under different conditions," Heat Transfer Engineering.
- Menter F. R., 1994, "Two-equation eddy-viscosity turbulence models for engineering applications," AIAA journal, Vol. 32 (8), pp. 1598-1605. https://doi.org/10.2514/3.12149