DOI QR코드

DOI QR Code

Review of the reinforcement sizing in the strength design of reinforced concrete slabs

  • Gil-Martina, Luisa Maria (Department of Structural Mechanics, University of Granada, Campus Universitario de Fuentenueva) ;
  • Hernandez-Montes, Enrique (Department of Structural Mechanics, University of Granada, Campus Universitario de Fuentenueva)
  • 투고 : 2020.04.30
  • 심사 : 2021.02.02
  • 발행 : 2021.03.25

초록

This paper presents a review of the two widespread approaches which deal with the ultimate strength design of RC slabs subjected to bending moments and torsion: The Field of Moments Method (FoMM) and the Sandwich method (SM). Special attention is paid to the ultimate strain distribution implicitly assumed when using each one of the methodologies, in particular, the yielding of the steel reinforcement. This work analyzes the initial assumption regarding ultimate strain distribution in the SM. Furthermore, this work studies the resisting moments field on which the Wood-Armer method is based, and it finds some inconsistencies. Several examples have been developed.

키워드

참고문헌

  1. ACI Committee 318 (2019), Building Code Requirements for Structural Concrete, American Concrete Institute, Michigan. USA
  2. Al-Azzawi, A.A. and Abed, S.A. (2017), "Investigation of the behavior of reinforced concrete hollow-core thick slabs", Comput. Concrete, 19(5), 567-577. https://doi.org/doi.org/10.12989/cac.2017.19.5.567.
  3. Armer, G.S.T. (1968), "Discussion of the reinforcement of slabs in accordance with a predetermined field of moments", Concrete, 2(8), 319-320.
  4. Bhatt, P., Hafiz, L.M.A. and Green, D.R. (1988), "Direct design of reinforced concrete skew slabs", Comput. Struct., 30(3), 477-484. https://doi.org/10.1016/0045-7949(88)90280-5.
  5. Braestrup, M.W. (2008), "Yield line theory and concrete plasticity", Mag. Concrete Res., 60(8), 549-553. https://doi.org/10.1680/macr.2008.60.8.549.
  6. Broundum-Nielsen, T. (1974), "Optimum design of reinforced concrete shells", Report No R44, Technical University of Denmark.
  7. Corley, W., Sozen, M. and Siess, C. (1961), "The equivalent frame analysis for reinforced concrete slabs", Structural Research Series No, 218, University of Illinois at Urbana-Champaign, Champaign, IL, USA.
  8. CSA (2019), Design of Concrete Structures (CAN/CSA-A23.3-14), Canadian Standards Association, Mississauga, ON, Canada.
  9. CYPE Ingenieros (2020), www.cype.es.
  10. Denton, S.R. and Burgoyne, C.J. (1996), "The assessment of reinforced concrete slabs", Struct. Eng., 74(9), 147-152.
  11. Denton, S., Shave, J., Bennetts, J. and Hendy, C. (2011), Design of Concrete Slab Elements in Biaxial Bending, Bridge Design to Eurocodes, ICE Publishing, London, UK.
  12. Eurocode 2 (2004), Design of Concrete Structures. Part 1.1: General Rules and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  13. Eurocode 2 (2005), Design of Concrete Structures. Part 2: Concrete Bridges-Design and Detailing Rules, European Committee for Standardization, Brussels, Belgium.
  14. Gil-Martin, L.M. and Hernandez-Montes, E. (2016), "Safety levels of the traditional strength design of RC slabs under bending and torsion", Eng. Struct., 127, 374-387. https://doi.org/10.1016/j.engstruct.2016.08.063.
  15. Gil-Martin, L.M. and Hernandez-Montes, E. (2019a). Closure to "Discussion on "Strain compatibility in the strength design of RC slabs, by L.M. Gil-Martin, E. Hernandez-Montes, Eng. Struct., 178(2019), 423-435", Eng. Struct., 200, 1-5. https://doi.org/10.1016/j.engstruct.2018.10.045.
  16. Gil-Martin, L.M. and Hernandez-Montes, E. (2019b), "Strain compatibility in the strength design of RC slabs", Eng. Struct., 178, 423-435. https://doi.org/10.1016/j.engstruct.2018.10.045.
  17. Gvozdev, A.A. (1939), "Obosnovanie §33 norm proektirovaniya zhelobetonnykh konstruktsii (Comments of the design standard for reinforced concrete structures)", Stroit. Prom., 17(3), 51-58.
  18. Gorkem, S.E. and Husem, M. (2013), "Load capacity of highstrength reinforced concrete slabs by yield line theory", Comput. Concrete, 12(6), 819-829. https://doi.org/doi.org/10.12989/cac.2013.12.6.819.
  19. Hernandez-Montes, E., Carbonell-Marquez, J.F. and Gil-Martin, L.M. (2014), "Limits to the strength design of reinforced concrete shells and slabs", Eng. Struct., 61. https://doi.org/10.1016/j.engstruct.2014.01.011.
  20. Ingerslev, A. (1921), "On a simple analysis of two-way slabs", Ingeniren, 30(69), 507-515.
  21. Jaeger, T. (2013), "Extended sandwich model for reinforced concrete slabs in flexure", Eng. Struct., 56, 2229-2239. https://doi.org/10.1016/j.engstruct.2013.08.032.
  22. Johansen, K.W. (1962), Yield-line Theory, Cement and Concrete Association, London, UK.
  23. Kaufmann, W. (2019), "Discussion on "Strain compatibility in the strength design of RC slabs" by L.M. Gil-Martin, E. HernandezMontes, Eng. Struct., 178 (2019), 423-435", Eng. Struct., 189, 241-242. https://doi.org/10.1016/j.engstruct.2019.03.073.
  24. Kemp, K.O.O. (1965), "The yield criterion for orthotropically reinforced concrete slabs", Int. J. Mech. Sci., 7(11), 737-746. https://doi.org/10.1016/0020-7403(65)90002-0.
  25. Kotsovou, G.M., Kotsovos, G.M. and Vougioukas, E. (2016), "Assessment of design methods for punching through numerical experiments", Comput. Concrete, 17(3), 305-322. https://doi.org/doi.org/10.12989/cac.2016.17.3.305.
  26. Marti, P. (1990), "Design of concrete slabs for transverse shear", ACI Struct. J., 87(2), 180-190.
  27. Model Code 2010 (2012), Fib Bulletin No. 65, Lausanne. Switzerland.
  28. OBrien, E.J. and O'Dwyer, D. (2015), "A review of Wood Armer equations for torsion in bridge slabs", Struct. Eng., 93, 40-43.
  29. SAP2000 (2020), www.csiamerica.com.
  30. Vecchio, F. and Tata, M. (1999), "Approximate analyses of reinforced concrete slabs", Struct. Eng. Mech., 8(1), 1-18. https://doi.org/doi.org/10.12989/sem.1999.8.1.001.
  31. Wood, R.H. (1968), "The reinforcement of slabs in accordance with a predetermined field of moments", Concrete, 2(8), 69-76.