DOI QR코드

DOI QR Code

Seismic analysis of high-rise steel frame building considering irregularities in plan and elevation

  • Mohammadzadeh, Behzad (School of Civil, Environmental, and Architectural Engineering, Korea University) ;
  • Kang, Junsuk (Department of Landscape Architecture and Rural Systems Engineering, Seoul National University)
  • Received : 2019.08.21
  • Accepted : 2021.03.11
  • Published : 2021.04.10

Abstract

Irregularities of a building in plan and elevation, which results in the change in stiffness on different floors highly affect the seismic performance and resistance of a structure. This study motivated to investigate the seismic responses of high-rise steel-frame buildings of twelve stories with various stiffness irregularities. The building has five spans of 3200 mm distance in both X- and Z-directions in the plan. The design package SAP2000 was adopted for the design of beams and columns and resulted in the profile IPE500 for the beams of all floors and box sections for columns. The column cross-section dimensions vary concerning the number of the story; one to three: 0.50×0.50×0.05m, four to seven: 0.45×0.45×0.05 m, and eight to twelve: 0.40×0.40×0.05 m. Real recorded ground accelerations obtained from the Vrancea earthquake in Romania together with dead and live loads corresponding to each story were considered for the applied load. The model was validated by comparing the results of the current method and literature considering a three-bay steel moment-resisting frame of eight-story height subject to seismic load. To investigate the seismic performance of the buildings, the time-history analysis was performed using ABAQUS. Deformed shapes corresponding to negative and positive peaks were provided followed by the story drifts and fragility curves which were used to examine the probability of collapse of the building. From the results, it was concluded that regular buildings provided a seismic performance much better than irregular buildings. Furthermore, it was observed that building with torsional irregularity was more vulnerable to seismic failure.

Keywords

References

  1. Ajamy, A., Asgarian, B., Ventura, C.E. and Zolfaghari, M.R. (2018), "Seismic fragility analysis of jacket type offshore platforms considering soil-pile-structure interaction", Eng. Struct., 174, 198-211. https://doi.org/10.1016/j.engstruct.2018.07.066.
  2. Altunisik, A.C. and Kalkan, E. (2016), "Investigation of earthquake angle effect on the seismic performance of steel bridges", Steel Compos. Struct., 23(4), 855-874. https://doi.org/10.12989/scs.2016.22.4.855.
  3. Benavent-Climent, A., Morillas, L. and Escolano-Margarit, D. (2014), "Inelastic torsional seismic response of nominally symmetric reinforced concrete frame structures: Shaking table tests", Eng. Struct., 80, 109-117. https://doi.org/10.1016/j.engstruct.2014.08.047.
  4. Bojorquez, E. and Iervolino, I. (2011), "Spectral shape proxies and nonlinear structural response", Soil Dynam. Earthq. Eng., 31, 996-1008. https://doi:10.1016/j.soildyn.2011.03.006.
  5. Cancellara, D. and De Angelis, F. (2019), "Dynamic assessment of base isolation systems for irregular in plan structures: Response spectrum analysis vs nonlinear analysis", Compos. Struct., 215, 98-115. https://doi.org/10.1016/j.compstruct.2019.02.013.
  6. Choi, E., Mohammadzadeh, B., Kim, D. and Jeon, J.S. (2018), "A new experimental investigation into the effects of reinforcing mortar beams with superelastic SMA fibers on controlling and closing cracks", Compos. Part B: Eng., 137, 140-152. https://doi.org/10.1016/j.compositesb.2017.11.017.
  7. Choi, E., Mohammadzadeh, B., Hwang, J.H. and Kim, W.J. (2018), "Pullout behavior of superelastic SMA fibers with various endshapes embedded in cement mortar", Constr. Build. Mater., 167, 605-616. https://doi.org/10.1016/j.conbuildmat.2018.02.070.
  8. Choi, E., Mohammadzadeh, B., Hwang, J.H. and Lee, J.H. (2019), "Displacement-recovery-capacity of superelastic SMA fibers reinforced cementitious materials", Smart Struct. Syst., 24(2), 157-171. https://doi.org/10.12989/sss.2019.24.2.157.
  9. Choi, E., Chae, S.W., Park, H., Nam, T.H., Mohammadzadeh, B. and Hwang, J.H. (2018), "Investigating self-centering capacity of superelastic shape memory alloy fibers with different anchorages through pullout tests", J. Nanosci. Nanotechnol., 18, 6228-6232. https://doi:10.1166/jnn.2018.15635.
  10. Choi, E., Mohammadzadeh, B. and Kim, H.S. (2019), "SMA bending bars as self-centering and damping devices", Smart Mater. Struct., 28, 025029. https://doi.org/10.1088/1361-665X/aaf5e3.
  11. Chung, K.F., Ko, C.H. and Wang, A.J. (2005), "Design of steel and composite beams with web openings-Verification using finite element method", Steel Compos. Struct., 5(2), 203-233. https://doi.org/10.12989/scs.2005.5.2_3.203.
  12. Dasgupta, B. (2017), "Evaluation of methods used to calculate seismic fragility curves", U.S. Nuclear Regulatory Commission. https://www.nrc.gov/docs/ML1712/ML17122A268.
  13. Davani, M.R., Hatami, S. and Zare, A. (2016), "Performance-based evaluation of strap-braced cold-formed steel frames using incremental dynamic analysis", Steel Compos. Struct., 21(6), 1369-1388. http://dx.doi.org/10.12989/scs.2016.21.6.1369.
  14. Dya, A.F.C. and Oretaa, A.W.C. (2015), "Seismic vulnerability assessment of soft story irregular buildings using pushover analysis", Procedia Eng., 125, 925-932. https://doi.org/10.1016/j.proeng.2015.11.103
  15. Georgoussis, G., Tsompanos, A. and Makarios, T. (2015), "Approximate seismic analysis of multi-story buildings with mass and stiffness irregularities", Procedia Eng., 125, 959-966. https://doi.org/10.1016/j.proeng.2015.11.147.
  16. HAZUS, (1999), "Earthquake loss estimation methodology-Technical manual", Federal Emergency Management Agency and National Institute of Building Science. http://www.fema.gov/plan/prevent/hazus.
  17. Hoffman, S.T. and Fahnestock, L.A. (2011), "Behavior of multi-story steel buildings under dynamic column loss scenarios", Steel Compos. Struct., 11(2), 149-168. https://doi.org/10.12989/scs.2011.11.2.149.
  18. Hou, W., Xu, S., Ji, D., Li, Q. and Zhang, P. (2019), "Seismic performance of steel plate reinforced high toughness concrete coupling beams with different steel plate ratios", Compos. Part B: Eng., 159, 199-210. https://doi.org/10.1016/j.compositesb.2018.09.100.
  19. Hsu, H.L., Juang, J.L. and Chou, C.H. (2011), "Experimental evaluation on the seismic performance of steel knee braced frame structures with energy dissipation mechanism", Steel Compos. Struct., 11(1), 77-91. http://dx.doi.org/10.12989/scs.2011.11.1.077.
  20. Kim, S. and Lee, K. (2013), "Seismic performance of wind-designed diagrid tall steel buildings in regions of moderate seismicity and strong wind", Steel Compos. Struct., 14(2), 155-171. http://dx.doi.org/10.12989/scs.2013.14.2.155.
  21. Kircil, M.S. and Polat, Z. (2006), "Fragility analysis of mid-rise R/C frame buildings", Eng. Struct., 28, 1335-1345. http://doi:10.1016/j.engstruct.2006.01.004.
  22. Lee, D., Ha, T., Jung, M. and Kim, J. (2014), "Evaluating high performance steel tube-framed diagrid for high-rise buildings", Steel Compos. Struct., 16(3), 289-303. http://dx.doi.org/10.12989/scs.2014.16.3.289.
  23. Li, S., Zuo, Z., Zhai, C., Lili, X. (2017), "Comparison of static pushover and dynamic analyses using RC building shaking table experiment", Eng. Struct., 136, 430-440. https://doi.org/10.1016/j.engstruct.2017.01.033.
  24. Lian, M., Su, M. and Guo, Y. (2015), "Seismic performance of eccentrically braced frames with high strength steel combination", Steel Compos. Struct., 18(6), 1517-1539. http://dx.doi.org/10.12989/scs.2015.18.6.1517.
  25. Linzell, D.G. and Nadakuditi, V.P. (2011), "Parameters influencing seismic response of horizontally curved, steel, I-girder bridges", Steel Compos. Struct., 11(1), 21-38. https://doi.org/10.12989/scs.2011.11.1.021.
  26. Mario, D. and Barbara, P. (2008), "A review of research on seismic behavior of irregular building structures since 2002", Bull. Earthq. Eng., 6, 285-308. https://doi.org/10.1007/s10518-007-9052-3
  27. Mohammadzadeh, B., Bina, M. and Hasounizadeh, H. (2012), "Application and comparison of mathematical and physical models on inspecting slab of stilling basin floor under static and dynamic forces", Appl. Mech. Mater., 147, 283-287. https://doi.org/10.4028/www.scientific.net/AMM.147.283.
  28. Mohammadzadeh, B. and Noh, H.C. (2014), "Investigation into central-difference and Newmark's beta method in measuring dynamic responses", Adv. Mater. Res., 831, 95-99. https://doi.org/10.4028/www.scientific.net/AMR.831.95.
  29. Mohammadzadeh, B. and Noh, H.C. (2017), "Analytical method to investigate nonlinear dynamic responses of sandwich plates with FGM faces resting on elastic foundation considering blast loads", Compos. Struct., 174, 142-157. https://doi.org/10.1016/j.compstruct.2017.03.087.
  30. Mohammadzadeh, B. and Noh, H.C. (2019), "An analytical and numerical investigation on the dynamic responses of steel plates considering the blast loads", Int. J. Steel Struct., 19(2), 603-617. https://doi.org/10.1007/s13296-018-0150-7.
  31. Mohammadzadeh, B., Choi, E. and Kim, W.J. (2018), "Comprehensive investigation of buckling behavior of plates considering effects of holes", Struct. Eng. Mech., 68(2), 261-275. https://doi.org/10.12989/sem.2018.68.2.261.
  32. Mohammadzadeh, B., Choi, E. and Kim, D. (2019), "Vibration of sandwich plates considering elastic foundation, temperature change and FGM faces", Struct. Eng. Mech., 70(5), 601-621. https://doi.org/10.12989/sem.2019.70.5.601.
  33. Mohammadzadeh, B., Jung, S., Lee, T.H., Le, Q.V., Cha, J.H., Jang, H.W., Lee, S.H., Kang, J. and Shokouhimehr, M. (2020), "Manufacturing ZrB2-SiC-TaC Composite: Potential Application for AircraftWing Assessed by Frequency Analysis through Finite Element Model", Materials, 13, 2213. https://doi:10.3390/ma13102213.
  34. Mohammadzadeh, B., Kang, J. and Im, S. (2020), "Blast loaded plates:Simplified analytical nonlinear dynamic approach", Structures, 28, 2034-2046. https://doi.org/10.1016/j.istruc.2020.10.043.
  35. Mohammadzadeh, B., Jung, S., Lee, T.H., Cha, J.H., Park, J., Shahedi Asl, M., Jang, H.W., Lee, S.H., Shokouhimehr, M. and Kang, J. (2021), "Characterization and FEA evaluation of a ZrB2-SiC ceramic containing TaC for beam-column joint application", Ceramics Int., 47, 11438-11450. https://doi.org/10.1016/j.ceramint.2020.12.271.
  36. Oikonomou, A. and Bougiatioti, F. (2011), "Architectural structure and environmental performance of the traditional buildings in Florina, NW Greece", Build. Environ., 46(3), 669-689. https://doi.org/10.1016/j.buildenv.2010.09.012.
  37. Ozmen, C. and Unay, A.I. (2007), "Commonly encountered seismic design faults due to the architectural design of residential buildings in Turkey", Build. Environ., 42, 1406-1416. https://doi.org/10.1016/j.buildenv.2005.09.029.
  38. Ozuygur, A.R. (2016), "Performance-based seismic design of an irregular tall building-A case study", Structures, 5, 112-122. https://doi.org/10.1016/j.istruc.2015.10.001.
  39. Parajuli, H.R., Shrestha, R.K. (2018), "Generation of Synthetic Ground Motion", J. Geological Resour. Eng., 6, 105-111. https:// doi:10.17265/2328-2193/2018.03.002.
  40. Pedro, N., Simoes da Silva, L., Bento, R. and Simoes, R. (2009), "Calibration of model parameters for the cyclic response of endplate beam-to-column steel-concrete composite joints", Steel Compos. Struct., 9(1), 39-58. https://doi.org/10.12989/scs.2009.9.1.039.
  41. Reyes-Salazar, A., Cervantes-Lugo, J.A., Lopez-Barraza, A., Bojórquez, E. and Bojorquez, J. (2016), "Seismic response of 3D steel buildings with hybrid connections: PRC and FRC", Steel Compos. Struct., 22(1), 113-139. http://dx.doi.org/10.12989/scs.2016.22.1.113.
  42. Sheehan, T., Chan, T.M. and Lam, D. (2015), "Mid-length lateral deflection of cyclically-loaded braces", Steel Compos. Struct., 18(6), 1569-1582. http://dx.doi.org/10.12989/scs.2015.18.6.1569.
  43. Takin, K., Hashemi, B.H. and Nekooei, M. (2016), "The relationship between time-varying eccentricity of load with the corner lateral displacement response of steel structure during an earthquake", Steel Compos. Struct., 20(4), 801-812. http://dx.doi.org/10.12989/scs.2016.20.4.801.
  44. Vasilopoulos, A.A., Bazeos, N. and Beskos, D.E. (2008), "Seismic design of irregular space steel frames using advanced methods of analysis", Steel Compos. Struct., 8(1), 53-83. http://dx.doi.org/10.12989/scs.2008.8.1.053.
  45. Virella, J.C. and Godoy, L.A. (2009), "Dynamic response of empty steel tanks with dome roof under vertical base motion", Steel Compos. Struct., 9(2), 119-130. http://dx.doi.org/10.12989/scs.2009.9.2.119.