Journal of the Korean Society for Aeronautical & Space Sciences (한국항공우주학회지)

The Korean Society for Aeronautical and Space Sciences (한국항공우주학회)
권호 표지
DOI QR코드

DOI QR Code

Tacho Pulse Non-uniformity Effects on Pulse Count Method

타코펄스 불균일성으로 인한 펄스개수측정방법 영향성

  • Received : 2020.11.06
  • Accepted : 2021.02.23
  • Published : 2021.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Pulse count method is the classical reaction wheel speed detection method. In this study, we represent the pulse count method as mathematical equations. Instead of rotation speed, we model the reaction wheel rotation through rotation angle during sampling periods. We verified the effectiveness of the proposed model by comparing the pulse counts variation and averaging method effects from the model and previous research results. Then, we add tacho pulse non-uniformity to this verified model, and examine the errors of pulse count method. We express the measurement error increasement due to non-uniformity as mathematical equations, and also shows the requirement of moving average numbers to offset the measurement errors.

펄스개수측정방법은 반작용휠의 속도를 측정하는 고전적인 방법이다. 본 연구에서는 펄스개수측정방법을 수식으로 표현하였다. 반작용휠의 회전을 속도가 아니라 샘플링 시간 동안의 회전각도로 모델링하였다. 제안된 모델의 유효성은 모델에서 얻어진 펄스개수 변화와 이동평균의 효과가 기존 연구결과와 동일함을 확인하는 방법으로 검증하였다. 이렇게 검증된 모델에 타코펄스 불균일성을 추가하고 펄스개수측정방법의 오차에 대해서 살펴보았다. 불균일성으로 인해서 증가하는 측정오차의 크기를 수식으로 표현하였으며, 측정오차를 상쇄하기 위해서 취해야 하는 이동평균의 개수 조건을 제시하였다.

Keywords

References

  1. Kavanagh, R. C., "Improved Digital Tachometer With Reduced Sensitivity to Sensor Nonideality," IEEE Transactions on Industrial Electronics, Vol. 47, No. 4, August 2000, pp. 890-897. https://doi.org/10.1109/41.857969
  2. Kavanagh,, R. C., "Performance Analysis and Compensation of M/T-Type Digital Tachometers," IEEE Transactions on Instrumentation and Measurement, Vol. 50, No. 4, August 2001, pp. 965-970. https://doi.org/10.1109/19.948308
  3. Lygouras, J. N., Pachidis, T. P., Tarchanidis, K. N. and Kodogiannis, V. S., "Adaptive High-Performance Velocity Evalution Based on a High-Resolution Time to Digital Converter," IEEE Transactions on Instrumentation and Measurement, Vol. 57, No. 9, September 2008, pp. 2035-2043. https://doi.org/10.1109/TIM.2008.919039
  4. Petrella, R., Tursini, M., Peretti, L. and Zigliotto, M., "Speed Measurmenet Algorithms for Low-Resolution Incremental Encoder Equipped Drives: a Comparative Analysis," 2007 International Aegean Conference on Electrical Machines and Power Electronics, September 2007, pp. 780-787.
  5. Tsuji, T., Kobayashi, H., Mizuochi, M. and Ohnishi, K., "A Wide-Range Velocity Measurement Method for Motion Control," IEEE Transactions on Industrial Electronics, Vol. 56, No. 2, February 2009, pp. 510-519. https://doi.org/10.1109/TIE.2008.2003208
  6. Chen, Y., Yang, M., Long, J., Xu. D. and Blaabjerg, F., "M/T Method based Incremental Encoder Velocity Measurement Error Analysis and Self-Adaptive Error Elimination Algorithm," IECON 2017 -43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, 2017, pp. 2085-2090.
  7. Brugnano, F., Concari. C., Imamovic, E., Savi, F., Toscani, A. and Zanichelli, R., "A Simple and Accurate Algorithm for Speed Measurement in Electric Drives Using Incremental Encoder," IECON 2017 -43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, 2017, pp. 8551-8556.
  8. Vazquez-Gutierrez, Y., O'Sullivan, D. L. and Kavanagh,, R. C., "Evaluation of three opticalencoder-based speed estimation methods for motion control," The Journal of Engineering, Vol. 2019, No. 17, pp. 4069-4073. https://doi.org/10.1049/joe.2018.8058
  9. Anuchin, A., Dianov, A. and Briz, F., "Synchronous Constant Elapsed Time Speed Estimation Using Incremental Encoders," Journal IEEE/ASME Transactions on Mechatronics, Vol. 24, No. 4, 2019, pp. 1893-1901. https://doi.org/10.1109/TMECH.2019.2928950
  10. OH. S.-H. and Yong, K.-L., "Error Analysis of Reaction Wheel Speed Detection Methods due to Non-uniformity of Tacho Pulse Duration," Aerospace Engineering and Technology, Vol. 8, No. 2, 2009, pp. 92-97.
  11. Lee, J.-N., Park, S.-H., Heu, S.-J. and Lee, Y.-K., "The Implementation of the Speed Measurement Board for Reaction Wheel on the LEO Satellite using the T, M-Method," Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 40, No. 9, 2012, pp. 827-832. https://doi.org/10.5139/JKSAS.2012.40.9.827