DOI QR코드

DOI QR Code

Study on the Characteristic of Elastomer Composite Containing Tungsten Powder

  • Chung, Kyungho (Department of Polymer Engineering, The University of Suwon)
  • Received : 2020.12.31
  • Accepted : 2021.01.25
  • Published : 2021.03.31

Abstract

In order to develop an ultra-high-density elastomeric material for substitution of steel dynamic dampers, a new curing system and technique for high-loading of the filler were examined in this study. Mechanochemical modification of chloroprene rubber (MAH-g-CR) using an internal mixer was carried out with maleic anhydride (MAH) as a reactive monomer. The optimum amount of MAH was 10 phr and the efficient grafting of MAH on CR could be achieved at a mixing temperature of 100℃. After preparing MAH-g-CR, 50 mol% epoxidized natural rubber (ENR 50) was blended with MAH-g-CR to develop a "self-curable rubber blend system" via reaction between the functional groups of the elastomeric matrices without the curing agent and additives. The content of ENR 50 was fixed at 30 wt.% throughout evaluation of the curing behavior of the MAH-g-CR/ENR blend. Tungsten powder was added to the MAH-g-CR/ENR matrix up to 60 vol.% to obtain ultra-high-density, and the maximum density obtained was 7.57 g/㎤. Stable ts2 (scorch time) and t90 (90% cure time) could be obtained even when tungsten powder was incorporated up to 60 vol.%. In addition, the tensile strength and damping properties of MAH-g-CR/ENR containing 60 vol.% of tungsten were better than those of CR containing 60 vol.% of tungsten.

Keywords

References

  1. A. N. Gent, "Engineering with Rubber", 2nd ed., p. 15, 90, Hanser Publisher, New York, 2000.
  2. A. Ciesielski, "An Introduction to Rubber Technology", 1st ed., p. 133, 87, Rapra Technology Limited, Shropshire, 1999.
  3. N. Lasowicz and R. Jankowski, "Investigation of behavior of metal structures with polymer dampers under dynamic loads", Procedia Engineering, 199, 2832 (2017). https://doi.org/10.1016/j.proeng.2017.09.540
  4. V. Cu, B. Han, and D. Pham, "Tuned mass-high damping rubber damper on a taut cable", J. Civ. Eng., 21, 928 (2017).
  5. J. Jancar, "Influence of Filler Particle Shape on Elastic Moduli of Polypropylene(PP)/Calcium Carbonate and PP/Magnesium Hydroxide Composites", J. Mater. Sci., 24, 3947 (1989). https://doi.org/10.1007/BF01168958
  6. K. Nagdi, "Rubber as an Engineering Materials: Guide Line for Users", 1st ed., p112, Hanser Publisher, Munich, 1993.
  7. B. B. Boonstra, "Effect of Carbon Black Dispersion on the Mechanical Properties of Rubber Vulcanizates", Rubber Chem. Technol., 36, 115 (1963). https://doi.org/10.5254/1.3539530
  8. S. Ahmed and F. R. Jones, "A Review of Particulate Reinforcement Theories for Polymer Composites", J. Mater. Sci., 25, 4933 (1990). https://doi.org/10.1007/BF00580110
  9. K. Chung, D. Lee, K. Yang, W. Lee, and C. Hong, "Surface Modification of Matrix and Filler for Ultra High Density Elastomeric Material", Elastomer, 40, 93 (2005).
  10. J. P. Deng and W. T. Yang, "Self-Initiating Performance of Maleic Anhydride on Surface Photo-grafting Polymerization", J. Polym. Sci., 39, 3246 (2001). https://doi.org/10.1002/pola.1307
  11. A. Oromiehie, H. Ebadi-Dehaghani, and S. Mirbagheri, "Chemical Modification of Polypropylene by Maleic Anhydride", International J. Chem. Eng. Appl., 5, 117 (2014). https://doi.org/10.7763/IJCEA.2014.V5.363
  12. Y. Zhao, C. Ma, S. Cheng, W. Xu, Y. Du, Y. Bao, and Z. Xiao, "Maleic Anhydride-Grafted Isotactic Polybutene-1 and Modified Polyamide 6", Polymers, 10, 872 (2018). https://doi.org/10.3390/polym10080872
  13. N. Braga, H. Zaggo, T. Montanheiro, and F. Passador, "Preparation of Maleic Anhydride Grafted Poly(trimethylene terephthalate) by Reactive Extrusion Processing", J. Manuf. Mater. Process, 3, 37 (2019). https://doi.org/10.3390/jmmp3020037
  14. C. Nakason and A. Kaesman, "The Grafting of MAH Anhydride onto Natural Rubber", Polym. Testing, 23, 35 (2004). https://doi.org/10.1016/S0142-9418(03)00059-X
  15. P. Zhang, G. Huang, L. Qu, and Y. Nie, "Study on the self-crosslinking behavior based on polychloroprene rubber and epoxidized natural rubber", J. Appl. Polym. Sci., 125, 1084 (2012). https://doi.org/10.1002/app.34508