Computers and Concrete

  • 제27권5호
  • /
  • Pages.395-406
  • /
  • 2021
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Assessment of shear resistance of corroded beams repaired using SFRC in the tension zone

  • Jongvivatsakul, Pitcha (Innovative Construction Materials Research Unit, Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Laopaitoon, Phattarakan (Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Nguyen, Yen T.H. (Faculty of Civil Engineering, Industrial University of Ho Chi Minh City) ;
  • Nguyen, Phuoc T. (Faculty of Civil Engineering, Ho Chi Minh City Open University) ;
  • Bui, Linh V.H. (Faculty of Civil Engineering, Ho Chi Minh City Open University)
  • 투고 : 2020.05.08
  • 심사 : 2021.03.16
  • 발행 : 2021.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study experimentally and analytically investigates the shear behavior of corroded reinforced concrete (RC) beams repaired using steel fiber-reinforced concrete (SFRC) in the flexural zone. The experimental parameters are the corrosion degree (0%, 12%, and 17%) and the steel fiber volume in the SFRC (1.0%, 1.5%, and 2.0%). The test results reveal that corrosion degree significantly affects the shear resistance of the beams. The shear capacity of the beam with the corrosion degree of 17% was higher than that of the uncorroded beam, whereas the shear capacity of the beam with the corrosion degree of 12% was lower than that of the uncorroded beam. The shear efficiency of damaged beams can be recovered by repairing them using SFRC that contains a reasonable amount of steel fibers. In addition, two methods to estimate the shear capacity of the repaired beams are developed using the modified truss analogy and strut-and-tie models. The estimated shear capacity of the beam using the modified truss analogy model agrees well with the experimental data.

키워드

과제정보

This research was funded by the Program Management Unit for Human Resources & Institutional Development, Research and Innovation - CU [Grant number B16F630071] and the Asahi Glass Foundation. The fourth author and fifth author would also like to acknowledge the partial financial support provided by Ho Chi Minh City Open University.

참고문헌

  1. Azam, R. and Soudki, K. (2012), "Structural performance of shear-critical RC deep beams with corroded longitudinal steel reinforcement", Cement Concrete Compos., 34(8), 946-957. https://doi.org/10.1016/j.cemconcomp.2012.05.003.
  2. Badawi, M. and Soudki, K. (2005), "Control of corrosion-induced damage in reinforced concrete beams using carbon fiber-reinforced polymer laminates", J. Compos. Constr., 9(2), 195-201. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:2(195).
  3. Chen, J., Zhang, W. and Gu, X. (2018), "Mesoscale model for cracking of concrete cover induced by reinforcement corrosion", Computer Concrete, 22(1), 53-62. https://doi.org/10.12989/cac.2018.22.1.053.
  4. El-Maaddawy, T., Nessabi, A. and El-Dieb, A. (2013), "Flexural response of corroded reinforced concrete beams strengthened with powder-actuated fastened composites", J. Compos. Constr., 17(6), 04013004. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000395.
  5. El-Maaddawy, T., Soudki, K. and Topper, T. (2005), "Long-term performance of corrosion-damaged reinforced concrete beams", ACI Struct. J., 102(5), 649. https://doi.org/10.14359/14660.
  6. Fang, C., Lundgren, K., Chen, L. and Zhu, C. (2004), "Corrosion influence on bond in reinforced concrete", Cement Concrete Compos., 34(11), 2159-2167. https://doi.org/10.1016/j.cemconres.2004.04.006.
  7. Fu, C., Jin, N., Ye, H., Jin, X. and Dai, W. (2017), "Corrosion characteristics of a 4-year naturally corroded reinforced concrete beam with load-induced transverse cracks", Corros. Sci., 117, 11-23. https://doi.org/10.1016/j.corsci.2017.01.002.
  8. Gadve, S., Mukherjee, A. and Malhotra, S.N. (2010), "Corrosion protection of fiber-reinforced polymer-wrapped reinforced concrete", ACI Struct. J., 107(4), 349-356. https://doi.org/10.14359/51663860.
  9. Kara, I.F. and Dundar, C. (2012), "Prediction of deflection of high strength steel fiber reinforced concrete beams and columns", Comput. Concrete, 9(2), 133-151. https://doi.org/10.12989/cac.2012.9.2.133.
  10. Japan Society of Civil Engineers (1999), Guidelines of Design for RSF piers, Concrete Library 97, JSCE Guidelines for Concrete.
  11. Japan Society of Civil Engineers (2010), Standard Specifications for Concrete Structures, JSCE Guidelines for Concrete.
  12. Jongvivatsakul, P., Bui, L.V.H., Koyekaewphring, T., Kunawisarut, A., Hemstapat, N. and Stitmannaithum, B. (2019), "Using steel fiber-reinforced concrete precast panels for strengthening in shear of beams: an experimental and analytical investigation", Adv. Civil Eng., 4098505. https://doi.org/10.1155/2019/4098505.
  13. Jongvivatsakul, P., Nguyen, C.T., Tanapornraweekit, G. and Bui, L.V.H. (2020), "Mechanical properties of aramid fiberreinforced composites and performance on repairing concrete beams damaged by corrosion", Songklanakarin J. Sci. Tech., 42(3), 637-644.
  14. Li, H., Li, B., Jin, R., Li, S. and Yu, J.G. (2018), "Effects of sustained loading and corrosion on the performance of reinforced concrete beams", Constr. Build. Mater., 169, 179-187. https://doi.org/10.1016/j.conbuildmat.2018.02.199.
  15. Linh, V.H.B., Stitmannaithum, B. and Ueda, T. (2017), "Mechanical performances of concrete beams with hybrid usage of steel and FRP tension reinforcement", Comput. Concrete, 20(4), 391-407. https://doi.org/10.12989/cac.2017.20.4.391.
  16. Linh, V.H.B. (2018), "Mechanical performances of concrete beams with hybrid usage of steel and FRP reinforcement", Ph.D. Dissertation, Chulalongkorn University, Thailand.
  17. Linh, V.H.B., Stitmannaithum, B. and Ueda, T. (2018), "Ductility of concrete beams reinforced with both fiber-reinforced polymer and steel tension bars", J. Adv. Concrete Tech., 16(11), 531-548. https://doi.org/10.3151/jact.16.531.
  18. Linh, V.H.B., Stitmannaithum, B. and Jongvivatsakul, P. (2020a), "Comprehensive investigation on bond mechanism of embedded through-section fiber-reinforced polymer bars to concrete for structural analysis", J. Build. Eng., 101180. https://doi.org/10.1016/j.jobe.2020.101180.
  19. Linh, V.H.B., Yen, T.H.N., Nam, V.N., Phu, B.N., Viet, T.N. and Phuong, C.N. (2020b), "Experimental investigation on shear behaviors of corroded beams repaired in flexure by steel fiber-reinforced concrete", J. Sci. Tech., 43(1), 35-42. https://doi.org/10.46242/jst.v43i01.592.
  20. Liu, Y., Jiang, N., Deng, Y., Ma, Y., Zhang, H. and Li, M. (2016), "Flexural experiment and stiffness investigation of reinforced concrete beam under chloride penetration and sustained loading", Constr. Build. Mater., 117, 302-310. https://doi.org/10.1016/j.conbuildmat.2016.04.110.
  21. Ma, Y., Zhang, J., Wang, L. and Liu, Y. (2013), "Probabilistic prediction with Bayesian updating for strength degradation of RC bridge beams", Struct. Saf., 44, 102-109. https://doi.org/10.1016/j.strusafe.2013.07.006.
  22. Malumbela, G., Alexander, M. and Moyo, P. (2011), "Serviceability of corrosion-affected RC beams after patch repairs and FRPs under load", Mater. Struct., 44(1), 331-349. https://doi.org/10.1617/s11527-010-9630-8.
  23. Martinola, G., Meda, A., Plizzari, G.A. and Rinaldi, Z. (2010), "Strengthening and repair of RC beams with fiber reinforced concrete", Cement Concrete Compos., 32(9), 731-739. https://doi.org/10.1016/j.cemconcomp.2010.07.001.
  24. Masoud, S. and Soudki, K. (2006), "Evaluation of corrosion activity in FRP repaired RC beams", Cement Concrete Compos., 28(10), 969-977. https://doi.org/10.1016/j.cemconcomp.2006.07.013.
  25. Meda, A., Mostosi, S., Rinaldi, Z. and Riva, P. (2016), "Corroded RC columns repair and strengthening with high performance fiber reinforced concrete jacket", Mater. Struct., 49(5), 1967-1978. https://doi.org/10.1617/s11527-015-0627-1.
  26. Ruano, G., Isla, F., Pedraza, R.I., Sfer, D. and Luccioni, B. (2014), "Shear retrofitting of reinforced concrete beams with steel fiber reinforced concrete", Constr. Build. Mater., 54, 646-658. https://doi.org/10.1016/j.conbuildmat.2013.12.092.
  27. Safdar, M., Matsumoto, T. and Kakuma, K. (2016), "Flexural behavior of reinforced concrete beams repaired with ultra-high performance fiber reinforced concrete (UHPFRC)", Compos. Struct., 157, 448-460. https://doi.org/10.1016/j.compstruct.2016.09.010.
  28. Shannag, M.J. and Al-Ateek, S.A. (2006), "Flexural behavior of strengthened concrete beams with corroding reinforcement", Constr. Build. Mater., 20(9), 834-840. https://doi.org/10.1016/j.conbuildmat.2005.01.059.
  29. Shirkhani, A., Davarnia, D. and Azar, B.F. (2019), "Prediction of bond strength between concrete and rebar under corrosion using ANN", Comput. Concrete, 23(4), 273-279. https://doi.org/10.12989/cac.2019.23.4.273.
  30. Soudki, K., El-Salakawy, E. and Craig, B. (2007), "Behavior of CFRP strengthened reinforced concrete beams in corrosive environment", J. Compos. Constr., 11(3), 291-298. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:3(291).
  31. Tanarslan, H.M. (2017), "Flexural strengthening of RC beams with prefabricated ultra high performance fibre reinforced concrete laminates", Eng. Struct., 151, 337-348. https://doi.org/10.1016/j.engstruct.2017.08.048.
  32. Triantafyllou, G.G., Rousakis, T.C. and Karabinis, A.I. (2017), "Analytical assessment of the bearing capacity of RC beams with corroded steel bars beyond concrete cover cracking", Compos. B. Eng., 119, 132-140. https://doi.org/10.1016/j.compositesb.2017.03.036.
  33. Wang, X.H., Gao, X.H., Li, B. and Deng, B.R. (2011), "Effect of bond and corrosion within partial length on shear behaviour and load capacity of RC beam", Constr. Build. Mater., 25(4), 1812-1823. https://doi.org/10.1016/j.conbuildmat.2010.11.081.
  34. Yalciner, H., Eren, O. and Sensoy, S. (2012), "An experimental study on the bond strength between reinforcement bars and concrete as a function of concrete cover, strength and corrosion level", Cement Concrete Compos., 42(5), 643-655. https://doi.org/10.1016/j.cemconres.2012.01.003.